Bluetooth Speaker
User Manual
Caution and Safety
1. Do not immerse in water or expose to moisture, sunlight, or heat.
2. Store in a cool and dry place.
3. Do not expose to fire.
4. Avoid excessive impact; please discontinue use if the speaker is damaged.
5. Do not disassemble the speaker; there are no user-serviceable parts inside.
6. Excessive exposure to loud sound may result in hearing damage.
Introduction
The Bluetooth Speaker gives you the freedom to enjoy your music anywhere.
Exceptional sound quality is packed into this portable speaker. It is Bluetooth
version 2.1 compliant and is compatible with mobile phones, tablets, laptops,
and computer systems that feature Bluetooth technology.
The Bluetooth Speaker can be used to conduct phone calls when you use the
mobile phone function.
Charging the Speaker
1. Before first time use, charge the speaker for 2 hours with 5V/250mA suitable
charger.
2. Plug the supplied USB connector into your Bluetooth Speaker’s “Micro USB”
port. Plug the cable into a desktop computer or an AC wall charger. The LED
light will turn red when speaker is charging. The LED light will turn off when
the charging is complete.
Bluetooth Pairing and Use Instructions
1. Press and hold button more than 3 seconds to turn on the speaker.
2. The speaker will keep and the LED light will flash blue. It is now ready to pair
with your device.
3. Turn on Bluetooth on your device. Your device will search for any Bluetooth
devices in range. You should select “#2731”. The blue LED light will turn off
when successfully paired.
4. Music volume can be controlled by adjusting the volume on your device,
5. You can PAUSE and RESUME by pressing once button.
6. When you use your telephone through Bluetooth speaker, the button is for
pick up and hang up.
7. If your speaker has been paired previously with another device within the
effective range (30ft), then the original pairing must be removed. This is done
by deleting or forgetting the Bluetooth settings of the original device.
8. If the device moves beyond the effective range, the Bluetooth connection will
be disconnected. Once the device and speaker are back in effective range, you
will need to again establish the Bluetooth connection between the device and
the speaker.
9. Press and hold button more than 3 seconds to turn off the speaker when you
don’t use it.
Product Specifications
Model: SL010，2731
Up to 2 hours of playback time
Input: DC 5V/250mA
Charging time: 2 hours
Speaker power: 3W
Frequency response: 20Hz-20KHz
Lithium battery capacity: 250mAh
RF range: <30 ft. of wireless range
Bluetooth V2.1+EDR
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Loading...