13. Quickly set up
This product is compatible for MIJIA intelligent platform, which can be controlled by “MIJIA” App; it is
supported to MIUI system and can lined with other intelligent products of MIJIA
1. APP Download
Search for “MIJIA” in application store or scan the QR code below to download and install MIJIA APP
2. Add the device
Open “My Devices” in MIJIA APP, click the “+” at the top right corner of the page to add device, and
this device can be found at the list of “My Devices” when the device is added successfully
3. Buy more
Please download MIJIA APP and login MIJIA Store to buy more intelligent products and high quality
goods, or scan the QR code below to browse the page of MIJIA Store
The functions of actual product may not be conformed to the contents in the instructions totally due to technical upgrading and firmware updating.
In order to get the latest function introduction and safety use information, please visit corresponding section of MI
community or Ninebot official BBS, and communicate with other users.
Online customer service: www.mi.com/service
Service telephone: 400-100-5678
www.mi.com
Version V 1.2
Electric Scooter Instruction Manual
Welcome to use our product
1. Product and accessories
Thank you for choosing MI electric scooter (hereinafter referred to as electric scooter),
and the electric scooter is a kind of fashion sport recreational device.
Contents
1. Product and accessories
2. Functional schematic diagram
3. Electric scooter body assembly
4. Charger connection
5. Learn to ride
6. Safety tips
7. Folding and carrying
8. Daily care and maintenance
9. Model parameter table
10. Name and content of harmful substances in the product
11. Trademark and legal statement
12. Warranty policy
The whole electric scooter
Charging adapterScrew x 4
Legal
statement
Cur card
Cue Card
Instruction
manual
Electric Scooter Instruction Manual Electric Scooter Legal Statement
02
03
04
05
05
07
12
13
15
16
16
17
Accessories
Extended charging
Hexagon wrench
connector
Please carefully check whether the goods in the packaging box are complete and under good conditions, and in case
of any absence or damage and other problems, please visit after sales service page of MI www.mi.com/service or call
the service telephone of MI 400-100-5678 for consulting.
02
2. Functional schematic diagram
3. Electric scooter body assembly
Head light
Brake handle
Folding mechanism
Accelerator
Control panel
Handle-bar bell
1. Fasten the vertical tube of scooter and open
the parking holder
Buckle
2. Install the horizontal handle on the
vertical tube
Brake light
In-wheel motor
Disc brake
Parking
holder
3. Use the hexagon wrench in the packaging box
to lock the screws on both sides tightly
4. Carry on switch testing after the
installation is finished
Battery
Charging mouth
compartment
Control panel
there are four power indicator lights on the control panel to show the power of the battery. The power indicator lights will
show the indicate status according to the sequence of normal light, flickering and quenching from up to down. When
Power
indicator:
Mode
indicator:
Power
switch:
03 04
four lights are all on normally, the power is about 100% ~ 86%; if there are 3 lights on normally and only 1 light is
flickering, the power is about 85% ~ 71%; and so forth, the flickering power indicator light will be quenching with the
consuming of power. When the power indicator light at the bottom is flickering, it means that the power will be used up
very soon, and please charge the electric scooter before using. When the power is used up, and the four lights are all
quenching, the scooter will glide through inertia until the scooter is stopped naturally.
the power indicator light at the bottom has two colors, white and green. The light is white when the scooter is working
under normal mode; the light is green when the scooter is under energy-saving mode. (Energy-saving mode: the maximum
speed is 18km/h, and the accelerator is more smoothly, which is suitable for beginner to get familiar with riding.)
under shutdown status, pressing the switch shortly can start the scooter, and long time pressing the switch for 2s and
more under power-on condition can close down the scooter. When the scooter is starting up, shortly press the switch
once: start up/shut down the driving light; shortly press the switch continuously for twice: shift in the normal mode and
energy-saving mode.
4. Charger connection
Open the rubber plug
5. Learn to ride
You may get hurt during the learning period,
and please wear helmet and protectors all the
way, as shown in the figure.
05 06
Insert the charging plug
Start up the scooter and check the power
1
indicator light
Tightly buckle the
rubber plug when
charging is finished
Stand on the pedal with one leg and use the
2
other leg to thrust against the ground
4
down, and energy recovery system will be
started automatically for slowing down; vigorously hold the brake handle at the front left side
of horizontal handle for emergency stopping
3
Step on the pedal by both legs when the
electric scooter is gliding on the ground,
and slightly press the accelerator thumb
shifter (the accelerator can be started when
the speed is over 5km/h)
5Loosen the accelerator thumb shifter for slow
If you want to change the direction, slightly
shift your body weight to the direction to be
turned and slowly turn the handle
Loading...