Page 1
1
4
This is how the
machine should look
when you enter the
room.
Fill solution tank with
water (do not exceed
130°F). Add appropriate
cleaning chemical.
SC750/SC800 How To
Prepare for use
2
Unplug battery charger.
Wrap cord accordingly.
5
Do not mix detergent in
the tank for EcoFlex
models (fill cartridge).
3
6
Inspect recovery tank
and ball float cage then
lower the lid.
Inspect squeegee
blade, install squeegee
on machine
recovery hose to the squeegee
inlet).
(attach
7
10
Inspect and install
brush or pad.
Safely transport
machine to desired
work location.
8
11
Install brush or padholder under the deck.
Turn on machine. Verify
there is enough battery
life to complete job.
Choose appropriate
controls for the job.
9
Install brush for
(
Cylindrical models
12
Turn on scrub switch,
lower squeegee and
begin scrubbing.
).
Page 2
1
4
Empty recovery tank
and solution tank.
Empty water in suitable
drain or bucket.
SC750/SC800 How To
Store the Machine
2
Wash recovery tank
and solution tank
thoroughly with clean
water.
5
3
Inspect and clean
vacuum shut off and
debris catch cage.
6
Inspect hoses; replace
if kinked or damaged.
7
Lift recovery tank lid.
Allow tank to air dry.
Hang squeegee on the
back of machine.
8
Remove, rinse and
inspect squeegee.
Replace if needed.
9
Charge batteries.
Remove, clean and
inspect brush or pad.
Rinse with warm water.
Hang to dry. Replace if
needed.
Wipe down exterior of
the machine.
Page 3
1
4
Charge Batteries daily
at the end of the shift.
Check, clean and rotate
the brushes/pads.
SC750/SC800 How To
Daily Maintenance
2
Check/clean tanks and
hoses. Inspect ball float
cage.
5
Clean and check the
squeegee.
3
Inspect and clean
debris catch cage.
6
Clean Hopper on
(
Cylindrical models
).
1
4
Inspect scrub housing
skirts.
Clean solution
manifolds on Cylindrical
models.
Weekly Maintenance
2
Inspect and clean
solution filter.
5
Purge EcoFlex System:
Disconnect and remove
cartridge, turn machine
ON. Press and hold the
solution switch for 2
seconds.
3
Check each battery cell
water level
apply to gel batteries).
(does not
6
Monthly:
to lubricate machine
manual for details).
batteries
Yearly:
Check carbon brushes
Apply light oil
(see
Equalize
Loading...