Nil sk P 130.1/150.1/160.1
Nil sk P 130.1/150.1/160.1 X-TRA
128303204 c
User Manual
Printed in China
Copyright © 2010 Nilfisk, Division of Nilfisk-Advance A/S
3
We congratulate you on your new Nilfi sk High Pressure Washer
We are confi dent that the new high pressure washer of Nilfi sk will justify your expectations of quick and
effective cleaning. Now you have a cleaning device which will facilitate your future cleaning tasks and make
them more effective. Many tasks which were previously diffi cult, can now be solved in a few minutes and
with a much better result.
If, contrary to expectations, problems should arise which cannot be remedied by means of the information
in section 8.0, the Nilfi sk service organization will be at your disposal.
Nilfi sk is a global concern with a comprehensive knowledge within development and manufac turing of ef fi cient and environmentally friendly cleaning solutions. Our product range comprises cleaning solutions for
selected customer groups - from machines for domestic use to big industrial cleaning systems.
The expertise of Nilfi sk is cleaning focusing the need of the customer. Our wish is that you as a customers should feel quite confi dent that the cleaning equipment you buy from us is the most effi cient and that it
fulfi ls all of your expectations.
Best regards
Nilfi sk
Division of Nilfi sk-Advance A/S
Fields of application EN
Contents EN
Model survey
(P 12 476)
The applications for this product are domestic clean ing jobs:
Car, motorbike, boat, caravan, trailer, pa tio/drive/
fl agstones, woodwork, brickwork, bar be cue,
garden furniture etc.
1. Electric cable
2. Start-/stop switch
3. Connection for high pressure hose (only PRO
130/150/160)
4. Connection for water (with fi lter)
5. High pressure hose
6. Spray gun with trigger (6a) and locking device
(6b)
7. Spray lance with bayonet socket
8. TORNADO
®
PR nozzle
9. POWERSPEED
®
nozzle
10. Needle for cleaning of nozzle
11. Detachable container for detergents
12. Dosing regulator for detergents
13. Pressure gauge (not available on model B)
14. Regulation of pressure / water volume (not
available on model B)
15. Hose reel (only PRO 130/150/160 X-TRA)
16. Hose storage (only PRO 130/150/160)
Specifi cations: See model tag of machine.
Sound pressure level measured in accor dance with
ISO 3744, EEC Directive 2000/14/EEC:
P 130.1: L
pA
= 80 dB(A), L
WA
= 90 dB(A).
P 150.1: L
pA
= 80 dB(A), L
WA
= 93 dB(A).
P 160.1: L
pA
= 80 dB(A), L
WA
= 95 dB(A).
Hand/arm vibrations measured according to ISO
5349 is < 2.5 m/s
2
.
We reserve the right to alter the spec i fi ca tions.
1.0 Preparation .................................................... 4
2.0 Operating instructions .................................... 5
3.0 Accessories ................................................... 7
4.0 Maintenance .................................................. 8
5.0 Storage .......................................................... 8
6.0 Recycling the washer ..................................... 8
7.0 Questions - and answers ............................... 8
8.0 Trouble shooting guide ................................... 9
9.0 Warranty .....................................................10
4
1.0 Preparation EN
Extension cable
Extension cables should be of a watertight con struc tion and comply with the below-men tioned
requirements for length and cable dimensions.
1,5 mm² max 20 m
2,5 mm² max 30 m
• Cable connections should be kept dry and off the
ground.
• Always uncoil the extension cable com plete ly to
avoid heat dam age to the cable.
Water connection
Connect the high pressure washer by means of a
water hose to the water tap (pressure of inlet wa ter, max. 10 bar - temperature of inlet water, max.
60°C). You may use an or di nary ½" gar den hose of
min. 10 m and max. 25 m. At tach the hose using
a quick connector. NOTE: Connection to the public
mains according to regulations.
This high pressure washer is only allowed
to be connected with the drinking water
mains, when an appropriate backfl ow
preventer has been installed, Type BA according to
EN 1717. The backfl ow preventer can be ordered
under number 106411177. The length of the hose
between the backfl ow preventer and the high pressure washer must be at least 10 metres to absorb
possible pressure peaks (min diameter ½ inch).
Operation by suction (for example from a rainwater
vessel) is carried out without backfl ow preventer.
Recommended suction set: 126411387.
As soon as water has fl own through the BA valve,
this water is not considered to be drinking water any
more.
IMPORTANT! Only use water without any im pu ri ties. If there is a risk of running sand in the inlet
water (i.e. from your own well), a fi lter should be
mounted.
Safety precautions
• WARNING! High pressure jets can
be dan ger ous. Nev er direct the water jet at per sons, pets, live elec tri cal equip ment or the ma chine itself.
• The operator and anyone in the im-
me di ate vi cin i ty of the site of clean ing should take action to pro tect
them selves from being struck by
debris dis lodged dur ing op er a tion.
Wear goggles during op er a tion.
Before starting up your high pressure wash er, we
advise you to carefully read through this instruction
manual. Fol low all instructions to min i mize the risk
of injuries when using the ma chine.
Prior to operation
Before you start up your new machine for the fi rst
time, you must mount the holder for the spray lance.
It is fi xed at the top of the transport handle.
1. Insert the holder in the recess of the handle (see
illu.).
2. Fix the holder with the screw.
Mount water fi lter and water inlet connection (4).
PRO 130/150/160 X-TRA: Mount the handle for the
hose reel.
Before starting up your machine please check it
care ful ly for any de fects. If you fi nd any, do not start
up your ma chine and con tact your Nilfi sk distributor.
Especially check:
• The insulation of the electric cable should be
fault less and without any cracks. If the elec tric
cable is damaged, it should be replaced by an
authorized Nilfi sk distributor.
Mains power connection
The following should be observed when connecting
the high pressure washer to the elec tric in stal la tion:
• Only connect the machine to an in stal la tion with
earth connection.
• The electric installation shall be made by a cer ti fi ed electrician.
• It is strong ly rec om mend ed that the elec tric sup ply to this ma chine should in clude a re sid u al
cur rent device (GFCI).
1
2
5
Preparation EN
• Never try to clean clothes or foot wear on your self
or other per sons.
• Do not let children or people who have not read
the instruction manual ope rate the ma chine.
• Never use the machine in an en vi ron ment where
there could be a danger of ex plo sion. If any doubt
arises, please contact the local authorities.
• It is not allowed to clean asbestos- containing
sur fac es with high pressure.
Safety devices
Locking device on spray gun
The spray gun features a locking device (6b). When
the pawl is activated, the spray gun can not be operated.
Thermal sensor:
A thermal sensor protects the motor against overloading. The machine will restart after a few minutes
when the thermal sensor has cooled.
Pressure safety device
An integrated hydraulic safety valve protects the
system from excessive pressure
Operating Instructions EN
High pressure
Low pressure
2.0 Operating Instructions
2.1 Operating facilities
• Start-/stop rotary switch (2).
• Spray gun (6) with trigger (6a) and locking device
(6b).
• Dosing regulator for detergents (12).
• Regulation of pressure / water volume (14). (not
available on model B)
2.2 Connection
1. PRO 130/150/160: Attach the high pressure hose
(5) to the connection for high pressure hose (3).
Only use one extension hose of max. 7 m.
PRO 130/150/160 X-TRA: Unwind the high pres-
sure hose completely.
2. Attach the nipple of the high pressure hose to the
spray gun quick coupling.
3. Mount the nozzle or any other equipment you
want to use.
4. Connect the machine to the water and power
supplies.
2.3 Start
1. Check that the machine is in vertical po si tion.
2. Activate the trigger of the spray gun (6a) and let
the water run out until any air has escaped from
the inlet hose.
3. Turn the start/stop switch (2) to pos. I.
2.4 Operation
1. Always hold the spray lance
fi rmly with both hands! The spray
lance is affected by a lon gi tu di nal
thrust of up to 16.4 N when the high
pressure washer is ope rated.
2. Point the nozzle at the ground!
3. Activate the trigger of the spray gun (6a).
4. Always adjust the distance and thus the pres -
sure of the nozzle to the sur face which is to be
cleaned. NOTE: The pressure can be reg u lat ed
on the TORNADO
®
PR nozzle or the button for
regulation of pressure / water volume (14).
NOTE: Do not cover the machine during operation. If
the machine is left or not used for 5 minutes, it must
be switched off on the start/stop switch (2) pos. O.
Operation with detergents
Application of detergents is NOT possible if an
extension hose is applied.
1. Fill the container with a detergent.
2. Mount the TORNADO
®
PR nozzle and adjust it to
low pressure (see section 2.4.4).
3. Adjust the dosing regulator (12) to the re quired
vol ume of detergent (0-5%).
4. Apply the detergent from below and up wards.
5. Let the detergent act for the time stated on the
packing of the detergent and fl ush with pure water.
6
Operating Instructions EN
Separate detergent container
1. Remove the cover with suction hose from the
detergent container.
2. Mount the cover with suction hose on the separate
detergent container.
The cover has a standard thread and fi ts common
detergent containers. If your container does not have
a standard thread, detach the fi lter from the suction
hose and remove the cover. Remount the fi lter in the
suction hose.
Extra detergent hose can be pulled out of the machine.
2.5 Regulation of pressure / water
volume
This function is not available on model B.
Working pressure and water volume can be regulated on the machine by turning the button for regulation of pressure / water volume (14). The pressure
can be read on the pressure gauge (13).
2.6 Suction mode
The machine can take in water from a rain water
butt as an example. In the suction mode, the inlet
hose must be fi lled with water before starting up the
machine. The water inlet hose must not be too long,
approx. 5 m.
1. Make sure that the water butt is not placed on a
lower level than the ma chine.
2. Attach the water inlet hose to the ma chine and
place the other end of it in the water butt.
3. Start the machine.
4. Detach the spray lance and activate the trigger of
the spray lance. Keep the trig ger activated until
water has come out for approx. 15 sec onds.
5. Remount the spray lance and the ma chine is
ready for operation.
NOTE: The internal fi lter of the machine is not
intended for the fi ltration of large quan ti ties of impurities. If the water contains leaves, sand or the
like, an external suction fi lter should be mount ed.
For further in for ma tion, please contact your near est
Nilfi sk dis trib u tor.
2.7 End of operation
1. Stop the machine by turning the start/stop switch
(2) to pos. O.
2. Disconnect the plug from the sock et.
3. Shut off the water supply and ac ti vate the trigger
(6a) to relieve the machine of pres sure.
Concerning storage, please refer to section 5.0.
7
3.0 Accessories EN
Wall hook For suspension of
your high pressure
washer on the wall.
Water suction kit For removal of
large amounts of water from
e.g. garden pounds.
Detergents
Only use original accessories.
Stone & Wood For fl agstones, brick- and
Cleaner woodwork.
Suitable for moss and algae.
Plastic Cleaner For plastic and syn thet ic
ma te ri als such as garden
fur ni ture.
Metal Cleaner For cleaning of metal such as
gar den tools.
Car Combi Cleaner For cars etc. With rinsing wax.
Alu Cleaner For surfaces of aluminium.
Applied with an atomizer.
Oil & Grease For cleaning of grease and
Cleaner oil on motors for instance.
Applied with an atomizer.
Wood Cleaner For cleaning of wooden sur-
faces incl. of wooden garden
furniture.
Standard Equipment
Only use original accessories.
Nozzles Attached with the bayonet
coupling system. Stored on
the ma chine.
Tornado
®
PR (8) Universal adjustable nozzle.
Turn to the left:
high pres sure.
Turn to the right:
low pres sure.
Powerspeed® (9) Nozzle with rotating jet for
stubborn dirt on hard sur -
fac es.
Extra Equipment
Extension hose 7 m extension hose in creas -
ing the working range.
Brushes For cars and
other surfaces.
Available in
more shapes.
Tube cleaner 15 m long tube clean er for the
clean ing of tubes and drains.
Water-sand- For removal of paint and rust.
blasting equipment Sand avail a ble from do-it-
yourself shops.
Patio Plus Equipment for
quick and regular
clean ing of hori-
zontal (tiles etc.)
and vertical sur -
fac es.
Garden brush Rotating brush for cleaning of
wooden surfaces.
Rim brush Rotating brush for
cleaning of wheel
rims.
Underchassis Special spray lance for underspray lance chassis cleaning.
8
4.0 Maintenance EN
6.0 Recycling the washer
7.0 Questions and an swers
Why do I have to use an atomizer for some de ter gents?
Some detergents (except from soaps) must be
applied undiluted. For that purpose an atomizer or
maybe a brush is unique.
Why must the high pressure washer be stored in a
frost free room?
The machine may contain water which, when freezing, may damage vital parts.
How do I store my high pressure washer in the best
possible way?
Always empty the high pressure washer of water by
activating the trigger of the spray gun - after having
disconnected the water supply. Always detach the
high pressure hose (only PRO 130/150/160) and
coil it up with out bending it.
May I use an ordinary detergent in my high pres sure washer?
No. You may damage the cleaner and achieve a bad
result. The detergents of Nilfi sk have been specially
developed for use with a high pressure washer and
ensures a correct dosage and a quick effect.
Can I do anything special to keep my high pres sure
washer in a good condition?
Yes, beyond cleaning it carefully before set aside,
it will be a good idea to lubricate the couplings now
and then with grease or vaseline.
5.0 Storage EN
The machine should be stored in a frost-free
room!
Pump, hose and accessories should al ways be
emptied of water prior to storing as fol lows:
1. Stop the machine (rotary switch (2) in pos. O)
and de tach water hose and ac ces so ry.
2. Restart the machine and activate the trig ger.
Let the machine run until no more water runs
through the spray gun.
3. Stop the machine and unplug. Wind the electric cable round the hooks placed on the side
of the machine.
4. Separate spray gun and high pressure hose.
5.
PRO 130/150/160: Detach high pres sure hose,
coil it up and place it on the hose storage.
PRO 130/150/160 X-TRA: Coil the high pres-
sure hose up on the hose reel.
6. Place spray gun, nozzles and other ac ces so ries in the holders of the machine.
Should the machine by mistake be frozen, it will
be necessary to check it for damage.
NEVER START-UP A FROZEN MACHINE.
Frost damages are not covered by the
guarantee!
WARNING! Always disconnect the plug from the
socket prior to maintenance or cleaning.
To ensure a long and problem free working life,
please take the following advice:
• Wash out water hose, high pressure hose, spray
lance and accessories before mounting.
• Clean the couplings of dust and sand.
Any repair should always be made in an authorised
workshop with original spare parts.
4.1 Cleaning of nozzle
A clogging up in the nozzle causes a lower water
volume This is why clean ing is re quired immediately.
1. Stop the machine and disconnect the nozzle.
2. Clean the nozzle with the cleaning nee dle (10).
IMPORTANT: The needle should only be used
when the spray lance is detached!
3. Flush the spray lance backwards with wa ter.
4.2 Cleaning of water inlet fi lter
Clean the water inlet fi lter regularly once a month or
more frequently according to use.
1. Detach water inlet hose and coupling (4).
2. Pull out the fi lter and rinse it carefully.
3. Check that it is intact before re-mount ing it.
Make the old cleaner unusable immediately.
1. Unplug the cleaner and cut the electric
cable.
Do not discard electrical appliances with
household waste.
As specifi ed in European Directive 2002/96/EC
on old electrical and electronic appliances, used
electrical goods must be collected separately and
recycled ecologically.
Contact your local authorities or your nearest dealer
for further information.
9
8.0 Trouble shooting guide EN
To avoid unnecessary disappointments, you should check the following before contacting the
Nilfi sk service organisation:
Symptom Cause Recommended action
Machine refuses to start Machine not plugged in Plug in machine.
Defective socket Try another socket.
Fuse has blown Replace fuse. Switch off other machines.
Defective extension cable Try without the ex ten sion cable.
Machine stops Fuse has blown Replace fuse. Switch off other machines.
Incorrect mains voltage Check that the mains voltage corresponds to
specifi cation on the model tag.
Thermal sensor activated Wait - the machine will start after a few
minutes.
WARNING! The trigger of the spray gun
must not be activated.
Fuse blows Fuse too small Change to an installation higher than the
amp. consumption of the machine.
You may try without the extension cable.
Machine pulsating Air in inlet hose/pump Allow machine to run with open trigger until
regular working pressure resumes.
Inadequate supply of Check that the water supply corresponds to
mains water specifi cations required (see model tag)
NB! Avoid using long, thin hoses (min 1/2")
Nozzle partially blocked Clean the nozzle (see section 4.1)
Water fi lter blocked Clean the fi lter (see section 4.2)
Hose kinked Straighten out hose.
High pressure hoses too long Disconnect high pressure extension hoses
and retry. (Extension hose max. 7 m).
Machine often starts Pump/spray gun is Contact your nearest Nilfi sk Service Centre.
and stops by itself leaking
Machine starts, but Pump/hoses or accessory Wait for pump/hoses or accessory to thaw.
no water comes out frozen
No water supply Connect inlet water.
Water fi lter blocked Clean the fi lter (see section 4.2)
Nozzle blocked Clean the nozzle (see section 4.1)
Pump pressure drops Button for regulation of Adjust the button to correct working pressure.
pressure / water volume not
correctly adjusted
(not available on model B)
In case problems other than the above occur, please contact your local Nilfi sk distributor.
UK:
Customer Services at Penrith - 01768 868995
10
9.0 Warranty conditions EN
Nilfi sk guarantees high pressure washers for domestic use for 2 years. If your high pressure washer
or ac ces so ries are handed in for repair, a copy of
the receipt must be enclosed.
Guarantee repairs are being made on the following
con dit ions:
z that defects are attributable to fl aws or defects in
materials or workmanship. (wear and tear as well
as misuse are not covered by the gu a ran tee).
z that the directions of this instruction manual have
been thoroughly observed.
z that repair has not been carried out or attempted
by other than Nilfi sk-trained service staff.
z that only original accessories have been applied.
z that the product has not been exposed to abuse
such as knocks, bumps or frost.
z that only water without any impurities has been
used.
z that the high pressure washer has not been used
for rental nor used com mer cial ly in any other way.
Repairs under this guarantee include replacement
of defective parts, exclusive of packing and postage/carriage. Besides, we refer to your national law
of sale.
The machine should be forwarded to one of the
service centres of the Nilfi sk organisation with
description/spe ci fi ca ti on of the fault.
Repairs not covered by the guarantee conditions
will be invoiced. (I.e. malfunctions due to Possible
Causes men ti o ned in section Troubleshooting
Chart of the instruction manual).
2
1
3
4
5
6
7
8
9
10
11
12
13
14
15
6a
6b
16
http://www.nilfi sk-advance.com
HEAD QUARTER
DENMARK
Nilfi sk-Advance Group
Sognevej 25
DK-2605 Brøndby
Tel.: (+45) 4323 8100
E-mail: mail.com@nilfi sk-advance.com
SALES COMPANIES
ARGENTINA
Nilfi sk-Advance srl.
Edifi cio Central Park
Herrera 1855, Offi ce 604
Ciudad Autónoma de Buenos Aires
Tel.: (+54) 11 6091 1571
AUSTRALIA
Nilfi sk-Advance
48 Egerton St.
P.O. Box 6046
Silverwater, N.S.W. 2128
Tel.: +61 2 8748 5900
E-mail: info@nilfi sk-advance.com.au
AUSTRIA
Nilfi sk-Advance GmbH
Metzgerstrasse 68
5101 Bergheim bei Salzburg
Tel.: 0662 456 400-14
E-mail: info.at@nilfi sk-advance.com
BELGIUM
Nilfi sk-Advance n.v-s.a.
Riverside Business Park
Boulevard Internationalelaan 55
Bâtiment C3/C4 Gebouw
Bruxelles 1070
Tel.: (+32) 2 467 60 50
E-mail: info.be@nilfi sk-advance.com
CANADA
Nilfi sk-Advance
240 Superior Boulevard
Mississauga, Ontario L5T 2L2
Tel.: (+1) 905 564 1149
E-mail: info@advance.ca.com
CHILE
Nilfi sk-Advance de Chile
San Alfonso 1462
Santiago
Tel.:(+56) 2 684 5000
E-mail: Pablo.Noriega@nilfi sk-advance.com
CHINA
Nilfi sk-Advance (Suzhou)
Building 18, Suchun Industrial Estate
Suzhou Industrial Park
215021 Suzhou
Tel.: (+86) 512 6265 2525
CZECH REPUBLIC
Nilfi sk-Advance
VGP Park Horní Počernice
Do Čertous 1/2658
193 00 Praha 9
Tel.: (+420) 24 14 08 419
DENMARK
Nilfi sk-Advance A/S
Industrivej 1
9560 Hadsund
Tel.: +45 7218 2100
E-mail: salg.dk@nilfi sk-advance.com
FINLAND
Nilfi sk-Advance Oy Ab
Piispantilankuja 4
02240 Espoo
Tel.: +358 207 890 600
E-mail: asiakaspalvelu.fi @nilfi sk.com
FRANCE
Nilfi sk-Advance
26 Avenue de la Baltique
Villebon sur Yvette
91944 Courtabouef Cedex
Tel.: (+33) 1 69 59 87 00
E-mail: info.fr@nilfi sk-advance.com
GERMANY
Nilfi sk-ALTO
Division of Nilfi sk-Advance AG
Guido-Oberdorfer-Str. 10
89287 Bellenberg
Tel.: (+49) 180 5 37 37 37
E-mail: info.de@nilfi sk-alto.com
GREECE
Nilfi sk-Advance SA
8, Thoukididou str.
164 52 Argiroupolis
Tel.: +30 210 911 9600
E-mail: nilfi sk-advance@clean.gr
HOLLAND
Nilfi sk-Advance
Versterkerstraat 5
1322 AN Almere
Tel.: (+31) 36 546 07 00
E-mail: info.nl@nilfi sk-advance.com
HONG KONG
Nilfi sk-Advance Ltd.
Room 2001 HK Worsted Mills
Industrial Building
31-39 Wo Tong Tsui Street
Kvai Chung
Tel.: (+852) 24 27 59 51
HUNGARY
Nilfi sk-Advance Kereskedelmi Kft.
II. Rákóczi Ferenc út 10
2310 Szigetszentmiklos-Lakihegy
Tel: (+36) 24475 550
E-mail: info@nilfi sk-advance.hu
INDIA
Nilfi sk-Advance India Limited
349, Business Point,
No 201,2nd fl oor, above Popular Car World,
Western Express High way, Andheri ( East),
Mumbai - 400 069
Tel.: (+91) 223 2174592
IRELAND
Nilfi sk-Advance
1 Stokes Place
St. Stephen’s Green
Dublin 2
Tel.: (+35) 3 12 94 38 38
ITALY
Nilfi sk-Advance SpA
Strada Comunale della Braglia, 18
26862 Guardamiglio (LO)
Tel.: +39 0377 41 40 46
E-mail: mercato.italia@nilfi sk-advance.it
JAPAN
Nilfi sk-Advance Inc.
1-6-6 Kita-shinyokohama, Kouhoku-ku
Yokohama, 223-0059
Tel.: (+81) 45 548 2571
KOREA
Nilfi sk-Advance
Kumwon B/D 3F, 471-4, Gunja-Dong
Gwangjin-Ku
Tel.: (+82) 2497 8636
MALAYSIA
Nilfi sk-Advance Sdn Bhd
Sd 14, Jalan KIP 11
Taman Perindustrian KIP
Sri Damansara
52200 Kuala Lumpur
Tel.: (+603) 62753120
MEXICO
Nilfi sk-Advance de Mexico, S. de R.L. de C.V.
Prol. Paseo de la Reforma 61, 6-A2
Col. Paseo de las Lomas
01330 Mexico, D.F.
Tel: +52 55 2591 1002 (switchboard)
E-mail: info@advance-mx.com
NEW ZEALAND
Nilfi sk-Advance
Danish House
6 Rockridge Avenue
Penrose, Auckland 1135
Tel.: (+64) 95 25 00 92
NORWAY
Nilfi sk-Advance AS
Bjørnerudveien 24
1266 Oslo
Tel.: (+47) 22 75 17 70
E-mail: info.no@nilfi sk.com
POLAND
Nilfi sk-Advance Sp. Z.O.O.
05-800 Pruszków
ul. 3-go MAJA 8
Tel.: +48 22 738 37 50
PORTUGAL
Nilfi sk-Advance
Sintra Business Park
Zona Industrial Da Abrunheira
Edifi cio 1, 1° A
P2710-089 Sintra
Tel.: +35 121 911 2670
E-mail: mkt.pt@nilfi sk-advance.com
RUSSIA
Нилфиск-Эдванс
127015 Москва
Вятская ул. 27, стр. 7
Россия
Tel.: (+7) 495 783 96 02
E-mail: info@nilfi sk.ru
SINGAPORE
Nilfi sk-Advance Pte. Ltd.
40 Loyang Drive
Singapore 508961
Tel.: (+65) 6759 9100
SPAIN
Nilfi sk-Advance S.A.
Torre D’Ara
Paseo del Rengle, 5 Pl. 10
08302 Mataró
Tel.: (+3) 4 93 741 2400
E-mail: mkt.es@nilfi sk-dvance.com
SWEDEN
Nilfi sk-Advance
Sjöbjörnsvägen 5
100 73 Stockholm
Tel.: (+46) 85 55 944 00
E-mail: info.se@nilfi sk.com
SWITZERLAND
Nilfi sk-Advance
Ringstrasse 19
Kircheberg/Industri Stelzl
9500 Wil
Tel.: (+41) 719 23 84 44
E-mail: info.ch@nilfi sk-advance.com
TAIWAN
Nilfi sk-Advance Taiwan Branch
1F, No. 193, sec. 2, Xing Long Rd.
Taipei
Tel.: (+88) 6227 002 268
THAILAND
Nilfi sk-Advance Co. Ltd.
89 Soi Chokechai-Ruammitr
Viphavadee-Rangsit Road
Ladyao, Jatuchak, Bangkok 10900
Tel.: (+66) 2 275 5630
TURKEY
Nilfi sk-Advance Profesional Temizlik
Ekipmanlari Tic. A/S.
Necla Cad. No. 48
Yenisahra / Kadiköy
Istanbul
Tel.: (+90) 216 470 08 - 60
E-mail: info.tr@nilfi sk-advance.com
UNITED KINGDOM
Nilfi sk-Advance Ltd.
Unit 24
Hilllside Business Park
Kempson Way
Bury St. Edmunds
Suffolk IP32 7EA
Tel.: (+49) 01284 763163
E-mail: sales.uk@nilfi sk-advance.com
UNITED ARAB EMIRATES
Nilfi sk-Advance Middle East Branch
SAIF-Zone
P.O. Box 122298
Sharjah
Tel.: (+971) 553 2626 82
USA
Nilfi sk-Advance Inc.
14600 21st Avenue North
Plymouth, MN 55447-3408
Tel.: (+1) 763 745 3500
VIETNAM
Nilfi sk-Advance Representative Offi ce
No. 51 Doc Ngu Str.
Ba Dinh Dist.
Hanoi
Tel.: (+04) 761 5642
E-mail: nilfi sk@vnn.vn
Loading...