Nilfisk-Advance D 130.4 X-TRA, D 140.4 X-TRA, D-PG 130.4 X-TRA, D-PG 140.4 X-TRA Instruction Manual

Download

128332680 c (07.2015) EN-DA-NO-SV-FI-DE-FR-NL-IT-ES-PT-ELTR-CS-HU-PL-HR-SL-SK-LV-LT-ET-RU-ZH

D 130.4 X-TRA D 140.4 X-TRA D-PG 130.4 X-TRA D-PG 140.4 X-TRA

Instructions for use

User Manual ......................................................... 3 - 19

Instruktionsbog ..................................................... 20 - 36

Instruksjonsbok ..................................................... 37 - 53

Instruktionsbok ...................................................... 54 - 70

Käyttöohje ............................................................. 71 - 87

Betriebsanleitung .................................................. 88 - 105

Instructions d’utilisation ......................................... 106 - 125

Gebruiksaanwijzing ............................................... 126 - 143

Istruzioni sull’uso .................................................. 144 - 161

Instrucciones de manejo ....................................... 162 - 178

Instruções de operação ........................................ 179 - 196

Οδηγίες χρήσης .................................................... 197 - 215

Kullanım Kılavuzu ................................................. 216 - 234

Návod k obsluze ................................................... 235 - 251

Használati útmutató .............................................. 252 - 268

Instrukcja użycia ................................................... 269 - 286

Priručnik za korisnike ............................................ 287 - 303

SL Navodila za uporabo........................................ 304 - 320

Návod na používanie ............................................ 321 - 338

Lietošanas instrukcijae ......................................... 339 - 355

Naudojimosi instrukcija ......................................... 356 - 372

Kasutamisjuhend .................................................. 373 - 389

Руководство ......................................................... 390 - 409

操作说明 ............................................................... 410 - 424

3Original Instructions

SHU

Contents

1 Introduction .................................................................................................. 4

1.1 Symbols used to mark instruction .......................................................................4

2 Safety precautions and working techniques ................................................4

3 Before you start using your high pressure washer ................................ 10

3.1 Mounting of trolley handle, hose hook and hose reel .......................................10

3.2 Mounting of quick coupling ...............................................................................10

3.3 Telescopic handle .............................................................................................10

3.4 Mounting of Battery (Cell battery – CR 2032) – Only for models with

Wireless regulation ...........................................................................................11

4 Operating your high pressure washer ..................................................... 11

4.1 Connection of high pressure hose ....................................................................11

4.2 Mounting of spray lance and Click&Clean nozzles ...........................................11

4.3 Water Connection .............................................................................................11

4.4 Starting the high pressure washer ....................................................................12

4.5 Pressure regulation on the TORNADO® PR- nozzle .........................................13

4.6 Stationary use ...................................................................................................13

4.7 Pairing the machine (Models with wireless regulation) .....................................13

4.8 Using wireless regulation (Models with wireless regulation) .............................13

5 Fields of application and working methods ............................................ 13

5.1 General .............................................................................................................13

5.2 Typical ﬁ elds of application ...............................................................................14

6 After using the pressure washer .............................................................. 15

6.1 Stopping the high pressure washer ..................................................................15

7 Maintenance ............................................................................................... 15

8 Troubleshooting ......................................................................................... 16

9 Accessories and detergents ..................................................................... 17

10 Warranty Conditions ................................................................................. 17

11 Main technical Data ...................................................................................18

12 Declaration of Conformity ......................................................................... 19

Original Instructions

SHU

1 Introduction

1.1 Symbols used to mark instruction

All pictograms attached to the high pressure washer and its components are shown and explained in this manual.

Safety instructions marked with this symbol must be observed to prevent personal injury or serious damage to property.

Caution where there is a risk of damaging the machine or its individual components.

This symbol indicates tips and instructions to simplify work and to ensure a safe operation of the high pressure washer.

2 Safety precautions and working techniques

Before starting up your machine for the ﬁ rst time, this instruction manual must be read through carefully. Save the instructions for later use.

WARNING!

• Inhalation of aerosols can be hazardous to health. Where applicable use a device in order to avoid or reduce aerosols production, e.g., a shield covering the nozzle. For protection against aerosols use a respiratory mask of class FFP 2 or higher.

• The high water pressure generated by the machine and the power connection are particular sources of danger.

• Machines shall not be used by children or untrained personnel. Children should be supervised to ensure that they do not play with the machine.

• Do not use the machine within range of persons unless they wear protective clothing.

• Before starting up your machine please check it carefully for any defects. If you ﬁ nd any, do not start up your machine, contact your Nilﬁ sk distributor. The insulation of the electric cable should be faultless and without any cracks. If the electric cable is damaged, an authorized Nilﬁ sk di stributor should replace it.

• Always unplug the power plug before cleaning or maintenance and when replacing parts or converting the machine to another function.



5Original Instructions

SHU

• Observe the national safety regulations issued, for example, by the employers liability insurance association, social security institutions, occupational safety and health authorities or other organizations.

Accessories and spare parts

• To ensure the machine safety only use original spare parts from Nilﬁ sk or approved by Nilﬁ sk.

• High pressure hoses, ﬁ ttings and couplings are important for the safety of the machine. Only use hoses, ﬁ ttings and couplings recommended by Nilﬁ sk.

Physical, sensory or mental conditions

• This machine is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge. If the machine is used by people with reduced physical, sensory or mental capabilities or lack of experience and knowledge they shall have been given supervision or instruction concerning use of the machine in a safe way and understand the hazards involved.

Applications

This machine has been developed for domestic use such as:

• Car, motorbike, boat, caravan, trailer, patio/drive/ﬂ agstones, woodwork, brickwork, barbecue, garden furniture, lawn mower.

Any other use is considered as improper use. Nilﬁ sk accepts no liability for any damage resulting from such use. The risk for such use is borne solely by the user. Proper use also includes proper operation, servicing and repairs as speciﬁ ed in this instruction.

Clothing and equipment

Always take action to protect yourself when operating the machine.

• Wear shoes with non-slip soles.

• Wear goggles, ear protection and protective clothes



Original Instructions

SHU

during operation.

Transporting the high pressure washer

• When transporting the machine in or on a vehicle, it must be secured, e.g. with straps, so that it cannot slip or tip over.

• Nilﬁ sk recommends that the machine is positioned horizontally on the backside, when transported in or on a vehicle.

Detergents

• This machine has been designed for use with cleaning agents supplied or recommended by Nilﬁ sk. The use of other cleaning agents or chemicals may adversely affect the function of the machine.

 Before starting the work

Inspecting the machine

• Do not use the machine if a supply cord or important parts of the machine are damaged, e.g., safety device, high pressure hose, and spray handle and spray attachments.

• The trigger of the spray handle must move easily and automatically return to its starting position when released.

• Always keep high pressure hose and spray attachment in good condition (clean, moving easily) and correctly assembled.

Electrical connection

WARNING!

Minimize the risk for electrical shock:

• Voltage and frequency of the machine (see rating plate) must match the voltage of and frequency of the mains supply.

• Only connect the machine to electrical installation made by a certiﬁ ed electrician and com ply with IEC 60364-1.

• It is recommended that the electrical supply to the



7Original Instructions

SHU

machine should include a residual current device that will interrupt the supply if the leakage current to earth exceeds 30 mA for 30 ms.

• Inadequate extension cables can be dangerous. If an extension cable is used, it shall be suitable for outdoor use, and the connection has to be kept dry and off the ground.

• Nilﬁ sk recommends use of an extension cable drum when cable extension is needed which keeps the socket at least 60 mm above the ground.

• If the electric cable is damaged, it must be replaced by an authorized Nilﬁ sk distributor or similar qualiﬁ ed person in order to avoid a hazard.

Water connection

• This high pressure washer is only allowed to be connected with the drinking water mains, when an appropriate backﬂ ow preventer has been installed, Type BA according to EN 60335-2-79.

• The backﬂ ow preventer can be ordered under number

106411177.

• As soon as drinking water has ﬂ own through the backﬂ ow preventer, it is no longer regarded as drinking water.

• Operation by suction (e.g. a rainwater vessel) is carried out without a backﬂ ow preventer – see “Connec- ting to a pressureless water supply”. The machine can be connected to water mains with a max. inletpressure of 1 MPa/10 bars and max. 60°C.

Safety devices

Locking device on spray handle:

• The spray handle features a locking device. When the pawl is activated, the spray handle cannot be operated.

Thermal sensor:

• A thermal sensor protects the motor against overloading. The machine will restart after a few minutes when the thermal sensor has cooled.

Original Instructions

SHU

Pressure safety device:

• An integrated hydraulic safety valve protects the system from excessive pressure.

During work

WARNING!

• It is not allowed to clean asbestos-containing surfaces with high pressure.

• Risk of explosion – Do not spray ﬂ ammable liquids.

• Never draw in ﬂ uids containing solvents (e.g., gasoline, heating oil, paint thinner or acetone) These substances damage the materials used in the machine. Their spray is highly combustible, explosive and poisonous.

• Never direct the water jet at yourself, other persons, not even to clean clothing or footwear - risk of injury.

• Never direct the water jet at pets or other animals.

• Never direct the water jet at live electrical equipment or the machine itself - danger of short-circuiting.

• The spray lance is affected by a kickback force less than 20N and a sudden torque when activating the trigger of the spray handle during operation.

• This high pressure washer machine must not be operated at temperatures below 0°C.

• Never start up a frozen machine. Frost damages are not covered by the guarantee!

• Always ensure ﬁ rm and safe footing.

• The machine shall be operated in an upright position.

• If the machine is left or not used for 5 minutes, it must be switched off on the start/stop switch "O" (1).

After ﬁ nishing the work

WARNING!

• Always switch off the machine and unplug the power plug from the socket after work and when leaving the machine unattended.

• Disconnect water inlet hose between machine and water supply.

9Original Instructions

SHU

• Always empty pump, hose and accessories of water after use of the machine and prior to storing.

Maintenance and repairs

WARNING!

• Always disconnect the electrical plug from the socket prior to maintenance, cleaning and repair.

• Any repair should always be made in Nilﬁ sk authorized workshop with original Nilﬁ sk spare parts.

• Do not attempt any maintenance not described in the instructions.

• If the machine refuses to start, stops, pulsates, pressure ﬂ uctuates, motor busses, fuse blows or no water comes out, check the trouble shooting diagram in these instructions. In case other problems occur, please contact your local Nilﬁ sk distributor.

Recycling the high pressure washer

Make the old machine unusable immediately.

• Unplug the machine.

• Cut the electric cable.

• The battery must be removed from the appliance before it is scrapped; the battery is to be disposed of safely.

Do not discard electrical appliances with household waste. As speciﬁ ed in WEEE Directive 2012/19/EC on old electrical and electronic appliances, used electrical goods must be collected separately and recycled ecologically. Contact your local authorities or your nearest dealer for further information.

Original Instructions

SHU

3 Before you start using your high pressure washer

See the pictorial quick reference guide – unpacking. Illustration shows the operation elements and how to prepare your machine for use.

Operation elements

1. Start/stop switch

2. Water inlet with ﬁ lter

3. High pressure connection (models without hose reel)

4. High pressure hose (models without hose reel)

5. Electric cable

6. Click&Clean spray lance

7. Spray handle with lock (7a)

8. Click&Clean Tornado nozzle

9. Click&Clean Tornado PR nozzle

10. Click&Clean Powerspeed nozzle

11. Foam sprayer

12. Nozzle cleaning tool

13. Hose reel

14. Model tag

15. Trolley handle (telescopic handle)

16. Hose hook (models without hose reel)

17. Hexagon key for handle and bracket mounting and lid for battery

18. Button for telescopic handle

19. Turnable cable hook

20. Quick coupling

3.1 Mounting of trolley handle, hose hook and hose reel

Mounting of trolley handle and hose hook (standard models)

A1 Push down the trolley handle (15) over the two metal tubes. Make sure that the handle

is mounted as illustrated. Mount screws with nuts (make sure that the screws go through handle as well as tube).

A2 Mount the hose hook (16) on the handle (2 screws).

Mounting of hose reel handle (models with hose reel)

A3 Click the hose reel handle on to the trolley handle (no screws).

3.2 Mounting of quick coupling

A4 When mounting the quick coupling for the ﬁ rst time, check that the factory ﬁ tted ﬁ lter is

positioned in the water inlet pipe.

A5 Screw the quick coupling tight on to the water inlet (2).

IMPORTANT!

The inlet ﬁ lter must always be ﬁ tted in the water inlet pipe to ﬁ lter out sand, lime stone and other impurities as these will damage the pump valves. The ﬁ lter is factory ﬁ tted. If the ﬁ lter is removed this will invalidate the guarantee.

3.3 Telescopic handle

A6 The machine features a tele scopic handle. To raise or lower the handle, press the button

(18) and move the handle upwards or downwards. When a click is heard, the handle is in right position.



11Original Instructions

SHU

3.4

Mounting of Battery (Cell battery – CR 2032) – Only for models with Wireless regulation

A7 Unscrew (1) the lid (2) to access the battery compartment in the wireless spray handle.

Gently push the battery (3) into the battery holder (4), + sign facing upwards as

illustrated.

Mount the lid (1) to the battery compartment (2). Make sure that the lid gasket (3) is still

placed properly in the groove at the spray handle.

A8 When the battery is mounted correctly, the orange LED (1) will ﬂ ash for two minutes or

until the spray handle has been paired with the machine. If pairing is not executed within 2 min., the spray handle enters into stand-by mode (battery saving) -> for pairing see section 4.7.

• If in standby mode and no pairing is in place, then the pairing process can be revitalized by pressing the up/down keys to activate the spray handle. Orange LED will then ﬂ ash until pairing is completed or resuming standby mode.

IMPORTANT!

When the battery runs out and you insert a new battery, the old battery must be disposed of safely.

4 Operating your high pressure washer

See the pictorial quick reference guide – operating your high pressure washer.

4.1 Connection of high pressure hose

B1 Attach the high pressure hose (4) to the spray handle (7). Detach the high pressure hose

by pressing the pawl (A).

B2 Mount the high pressure hose on the outlet (3) (models without hose reel).

4.2 Mounting of spray lance and Click&Clean nozzles

B3 Push the spray lance (6) into the spray handle (7), twist and release.

NOTE!

The spray lance has a built-in low pressure nozzle that can be used for ﬂ ushing away dirt.

B4 When attaching the nozzles (8, 9,10), press the nozzles into the spray lance.

IMPORTANT!

When attaching the click & Clean nozzles, the pawl on the side of the spray lance should come out again. The nozzle should stay in position when pulling it.

B5 Push the foam sprayer (11) into the spray lance (6).

NOTE!

The foam sprayer features a swivel lock, which must be positioned in the hole in the Click & Clean spray lance. Press the pawl to detach the Click & clean nozzles and the foam sprayer.

IMPORTANT!

Before starting the cleaning job, check that the machine is in an upright position and placed on an even surface. Do not place the machine in long grass!



Original Instructions

SHU

4.3 Water Connection

IMPORTANT!

Connecting to pressurized water supply

The inlet water max. pressure is 1 MPa/10 bar and the max. temperature is 60°C – see rating plate. An ordinary ½" garden hose of min. 10 m and max. 25 m will be suitable.

B6 Check that the ﬁ lter is ﬁ tted in the water inlet pipe and that it is not clogged up. B7 Connect the water hose to the water supply by means of the quick connector. Turn on the

water.

Connection to the drinking water mains according to national and local regulations.

Let the water run through the water hose before connecting it to the machine to prevent sand and dirt from penetrating the machine.

B8 Turn off the water and connect the water hose by means of the quick coupling to the wa-

ter inlet.

Connecting to pressure less water supply

The machine can also operate in suction mode, meaning that you can connect the machine to e.g. rainwater vessels, rivers, lakes and cisterns etc. When taking in water from non drinking water mains the backﬂ ow preventer is not needed. When connecting the machine to operate from pressure less water supplies – always use additional ﬁ ltering to secure that impurities are not sucked in. Hose length should be max. 3 meter and of minimum ½".

To meet these requirements, Nilﬁ sk recommends that you use the original Nilﬁ sk suction hose kit.

The Machine is designed for suction up to 100 cm above water surface.

• Position the machine at max. 1.0 meter above the water surface. Detach the high pressure hose from the outlet.

• Ensure that the inlet ﬁ lter is in position and attach the suction hose kit, secure tight connection to the inlet.

• Turn on the machine, turning the start/stop switch (1) to position "I".

• Wait until a steady jet exits the outlet.

• Switch off the machine and attach high pressure hose (4), spray handle, lance and nozzle.

• Start the machine again and activate the spray handle.

4.4 Starting the high pressure washer

IMPORTANT!

Connecting to mains power supply

The voltage and frequency of the machine (see model tag (14)) must match the voltage and frequency of the power supply. Connecting the high pressure washer to a supply system, the max allowed impedance is = 0,29+j0,18 (Zmax). Consult with the supply authority that the equipment is connected only to a supply of that impedance or less.

B9 Insert the power plug into power supply socket. B10 Turn on the water. B11 Release the trigger lock (7a). Remember to unplug, turn off the high pressure washer and

lock the trigger, when leaving the high pressure washer unattended

B12 Activate the trigger of the spray handle and let the water run until all air has escaped from

the water hose.

B13 Turn on the machine, turning the start/stop switch to position "I". B14 Activate the trigger of the spray handle. When releasing the trigger of the spray handle,

the machine automatically stops. The machine will start again when you reactivate the trigger of the spray handle.



13Original Instructions

SHU

4.5 Pressure regulation on the TORNADO® PR- nozzle

B15 The pressure can be regulated on the TORNADO

PR nozzle.

4.6 Stationary use

B16 If mounting a special wall hook (not standard), the pressure washer can be used as a

stationary solution meaning that it can be operated while hanging on the wall.

Only mount the wall hook on a sturdy wall. Adjust the length of the screws and size of

rawlplugs to the type of wall.

B17 On the wall hook Multi Brush (a) foam sprayer (b), Click & Clean brush (c) and Click &

Clean nozzles (d) can be stored.

IMPORTANT!

The bearing capacity of the wall hook is max. 30 kg.

4.7 Pairing the machine (Models with wireless regulation)

B18 Before using the machine with wireless regulation, the spray handle must be electrically

paired to the machine. When the battery has been mounted - ref. section 3.4, and the spray handle is in pairing mode (orange LED is ﬂ ashing (1) then turn on (2) the machine. The orange LED is now turned off and the spray handle is operational.

4.8 Using wireless regulation (Models with wireless regulation)

B19 The water pressure and use of energy is regulated by clicking the arrows (1) on the spray

handle. The power can be regulated stepwise by pushing and releasing each button. It can also be regulated continuously by pushing and holding down each button. If so, the power will be increased/ decreased until max/ min is reached. The green LED illustrating the power level (2) is only lighting when pressing the up/down keys (1).

• Other wireless units (eg. microwave ovens, baby monitors, neighbours' wireless devices) that operate in the 2.4 GHz band can have a reduced effect on the wireless range between spray handle and machine.

5 Fields of application and working methods

5.1 General

Efﬁ cient high presure cleaning is achieved by following a few guidelines, combined with your own personal experience of speciﬁ c cleaning tasks. Accessories and detergents, when correctly chosen, can increase the efﬁ ciency of your pressure washer. Here is some basic information about cleaning.

5.1.1 Detergent and foam

Foam or detergent should be applied onto dry surfaces so that the chemical product is in direct contact with the dirt. Detergents are applied from bottom to top, for example on a car bodywork, in order to avoid "super clean" areas, where the detergent collects in higher concentration and streams downwards. Let the detergent work for several minutes before rinsing but never let it dry on the surface being cleaned. Note: It is important that the detergents do not dry up. Otherwise the surface that has to be cleaned can be da maged.

5.1.2 Mechanical effect

In order to break down tough layers of dirt, additional mechanical effect may be required. Special wash brushes offer this supplementary effect that cuts through dirt (especially by car washing).



Original Instructions

SHU

5.2 Typical ﬁ elds of application

Below you will ﬁ nd a description of a lot of cleaning tasks which can be solved by a pressure washer from Nilﬁ sk in association with accessories and detergents.

Task Accessories ‘Click

& Clean’

Cleaning method

Car

Car nozzle, auto brush, underchassis

nozzle,

Foam sprayer,

Car Combi Cleaner

1. Apply Car Combi Cleaner with the foam sprayer. Always start from the bottom and work upwards. Let Car Combi

Cleaner act for at least 5 min.

2. Wash the car with the car nozzle, which has been optimized for quick and gentle cleaning of enamelled surfaces (the jet is wider and not so sharp). Start at the front of the car and work backwards to avoid water from penetrating by the door mouldings.

3. Use the brush for removal of trafﬁ c ﬁ lm which is not removed by the nozzle. If the car is very dirty, apply Car Combi Clean er again.

4. Attach the undercarriage nozzle and clean undercarriage and wheel arches.

5. Remove water from the surface of the car with the scraper on the car brush. Make sure that all grains of sand etc. have been removed before using the scraper. Wipe with a wash leather where the scraper cannot reach.

Rims, alumi-

nium

Multi Brush with

Rim brush head, auto nozzle, foam sprayer, Car Combi Cleaner

Apply Car Combi Cleaner with the foam sprayer or the Multibrush

with detergent tank. Let it act for approx. 5 min.. Wash with rim brush head.

Be careful! The high pressure jet may damage the tyres.

Flagstones, concrete

ﬂ oors and other hard surfaces

Powerspeed® nozzle, Stone & Wood Cleaner, Patio Cleaner

Wash towards outlets or the like. On surfaces with foulings you

may start by applying Stone & Wood Cleaner with the foam sprayer. Wash before the soap dries. Another more effective and quicker method is to use the Patio Cleaner. Thus you will also avoid splashes.

Garden furni-

ture, wood

Multi Brush with

Garden brush head (with or without detergent tank)

Stone & Wood

Cleaner

Foam sprayer

Apply Stone & Wood Cleaner with foam sprayer or Multi Brush

with Garden brush head and wash before the soap dries. NOTE: Use the Multi Brush with Garden brush head to clean off

the dirt.

Brickwork, Wood work

Powerspeed

nozzle, Stone & Wood Cleaner, Patio Cleaner

Same method as for ﬂ agstones, but be careful - bad joints and

wood may be damaged by high pressure. You may choose only

to use the Tornado

nozzle. Adjust the distance (pressure) to the quality of the joints and the wood. Patio Cleaner can also be used on vertical surfaces.

Gutter

Underchassis spray

lance

Wash the gutter with the nozzle. Always wash towards

downpipes. Beware not to spray under the rooﬁ ng.

Cleaning of

drain pipes, outlets, down pipes etc.

Tube cleaner Push the tube cleaner approx. ½ m (to mark) into a tube or drain

and activate the trigger of the spray handle. The nozzle opening turning backwards will pull the cleaner through the tube. The nozzle will break down the „plug“ and ﬂ ush the dirt backwards.

Rust, paint

Water/sandblasting

equipment

Mount the water/sand blasting equipment and rust and paint

is efﬁ ciently and quickly removed. Beware not to damage the surface to be sandblasted.

Greenhouse

Tornado

PR nozzle

brush, Stone &

Wood Cleaner

Wash with high pressure and maybe a brush. You may use Stone

& Wood Cleaner to remove moss and algae.

Garden tools,

lawn mover

Tornado

PR nozzle, Powerspeed® nozzle, multiangle adaptor, Metal Cleaner

Rinse the worst dirt off with the nozzle. Apply Metal Cleaner with

the foam sprayer and let it act for approx. 5 min. Wash with the nozzle. You may use the multiangle adaptor for hard to get at areas to avoid splashing.

15Original Instructions

SHU

6 After using the pressure washer

See the pictorial quick reference guide – storing the high pressure washer.

The high pressure washer should be stored in a frost free room! Should the machine by a mistake be frozen, it will be necessary to check it for damages.

6.1 Stopping the high pressure washer

C1 Shut off the water supply and activate the trigger of the spray handle and let the machine

run until no more water runs out of the nozzle. This will wash out water hose, high pressure hose, spray lance and nozzles.

C2 Stop the machine, turning the start/stop switch to position "0". C3 Unplug the machine from the power supply socket.

IMPORTANT!

To avoid accidents, the electric cable and the high pressure hose should always be wound up carefully.

C4 Wind up the electric cable on the dedicated cable hook (19). The upper hook can be

turned to release the electric cable. The upper hook has a built-in clip (1) for good holding of the electrical cable.

C5 The high pressure washer comes in two models: A) with hook for storage of high pres-

sure hose (16) - B) with a hose reel (13).

C6 Rinse the spray lance, nozzles and the foam sprayer after use. C7 Place spray handle (f), lance (a), nozzles (b), foam sprayer (c) in the holders on the high

pressure washer. The nozzle cleaning tool (d) and a Click & Clean brush (e) can also be stored on the product.

7 Maintenance

See the pictorial quick reference guide - maintenance.

To ensure a long and problem free working life of the high pressure washer, please take the following advices:

• Wash out water hose, high pressure hose, spray lance and accessory before mounting

• Clean the connectors of dust and sand

• Rinse the detergent bottle and the detergent nozzle

• Clean the nozzle

• Keep the water inlet ﬁ lter clean and unclogged

Cleaning of the water inlet ﬁ lter

D1 Clean the water inlet ﬁ lter regularly once a month or more frequently according to use.

Carefully loosen the ﬁ lter with a screwdriver and clean it. Check that it is intact before remounting it.

Cleaning of nozzle

A clogging up in the nozzle causes a pump pressure which is too high, why cleaning is required immediately.

IMPORTANT!

The nozzle cleaning tool (12) should only be used when the nozzle is detached and the machine is stopped!

D2 Stop the machine and disconnect the nozzle. Clean the nozzle.



Original Instructions

SHU

D3 Flush the nozzle backwards with water.

Cleaning of machine vents

D4 The machine should be kept clean so as to let cooling air pass freely through the

machine vents.

Greasing of O-rings

D5 To ensure an easy connection and that O-rings do not dry up the couplings should

be greased regularly.

8 Troubleshooting

To avoid unnecessary disappointments, you should check the following before contacting the Nilﬁ sk service organization.

Symptom Cause Recommended action

Machine refuses to start

Machine not plugged in Defective socket Fuse has blown Defective extension cable

Plug in machine Try another socket. Replace fuse. Switch off other machines. Try without the extension cable.

Fluctuating pressure

Pump sucking air

Valves dirty, worn out or stuck

Pump seals worn out

Check that hoses and connections are airtight. Clean and replace or refer to local Nilﬁ sk distributor. Clean and replace or refer to local Nilﬁ skdistributor.

Machine stops

Fuse has blown Incorrect mains voltage

Thermal sensor activated

Nozzle partially blocked

Replace fuse. Switch off other machines. Check that the mains voltage corresponds to speciﬁ cation on the model tag. Leave the washer for 5 minutes to cool down. Clean the nozzle (see section 7)

Fuse blows

Fuse too small Change to an installation higher than the

amp. consumption of the machine. You may try without the extension cable.

Machine pulsating

Air in inlet hose/pump

Inadequate supply of mains water

Nozzle partially blocked Water ﬁ lter blocked Hose kinked

Allow machine to run with open trigger until regular working pressure resumes. Check that the water supply corresponds to speciﬁ cations required (see model tag) NB! Avoid using long, thin hoses (min. 1/2") Clean the nozzle (see section 7) Clean the ﬁ lter (see section 7) Straighten out hose.

Machine often starts and stops by itself

Pump/spray handle is leaking Contact your nearest Nilﬁ sk Service Centre.

Machine starts, but no water comes out

Pump/hoses or accessory frozen No water supply Water ﬁ lter blocked Nozzle blocked

Wait for pump/hoses or accessory to thaw.

Connect inlet water. Clean the ﬁ lter (see section 7) Clean the nozzle (see section 7)

17Original Instructions

SHU

Only Wireless models:

Symptom Cause Recommended action

The orange LED is not ﬂ ashing while ready for pairing

The spray handle is in standby mode

Battery mounted incorrectly or no power on battery

Press the up/down keys to activate the spray handle. The orange LED will then ﬂ ash and pairing can be made within 2 min.

Dismount the lid and make sure that the battery is mounted correctly or replace the battery

The orange LED will light uninterrupted for 3 Sec and repeated when pressing up/ down button

Low battery Replace the battery

The green LED is not lightning when pressing the up/down keys

There is no communication between spray handle and machine

Point the spray handle towards the machine or move closer to the machine

In case problems other than the above occur, please contact your local Nilﬁ sk distributor. Local Nilﬁ sk distributors are listed on the back cover of this instruction.

Customer Service at Penrith – 01768 868995

9 Accessories and detergents

Only use original accessories and detergents. For further information, see www.nilﬁ sk.com.

10 Warranty Conditions

Nilﬁ sk guarantees high pressure washers for domestic use for 2 years. If your high pressure washer or ac ces so ries are handed in for repair, a copy of the receipt must be enclosed. Guarantee repairs are being made on the following con dit ions:

• that defects are attributable to ﬂ aws or defects in materials or workmanship. (wear and tear as well as misuse are not covered by the gu a ran tee).

• that the directions of this instruction manual have been thoroughly observed.

• that repair has not been carried out or attempted by other than Nilﬁ sk-trained service staff.

• that only original accessories have been applied.

• that the product has not been exposed to abuse such as knocks, bumps or frost.

• that only water without any impurities has been used.

• that the high pressure washer has not been used for rental nor used com mer cial ly in any other way.

Repairs under this guarantee include replacement of defective parts, exclusive of packing and postage/carriage. Besides, we refer to your national law of sale. The machine should be forwarded to one of the service centres of the Nilﬁ sk organisation with description/ spe ci ﬁ ca ti on of the fault. Repairs not covered by the guarantee conditions will be invoiced. (I.e. malfunctions due to Causes men ti o ned in section Troubleshooting Chart of the instruction manual).

Original Instructions

SHU

11 Main technical Data

Type

D 130.4 X-TRA

D-PG 130.4 X-TRA

D 140.4 X-TRA

D-PG 140.4 X-TRA

Electric specifications

Rated voltage V 230-240 230-240

Rated frequency Hz 50 50 Rated power consumption kW 2.1 2.4 Current A 9.5 10

Protection class

Class I/ Class II

Class I Class I

Protection degree IP xx IPX5 IPX5

Hydraulic specifications

Rated pressure MPa/bar 12.5/125 13.5/135 Max. pressure MPa/bar 13.0/130 14.0/140 Rated water flow l/min/l/h 7.5/450 7.0/420 Max. water flow l/min/l/h 9.2/550 9.2/550 Max. water inlet pressure Mpa/bar 1/10 1/10

Max. water inlet temperature °C 60 60 Max. water inlet temp. suction mode °C 20 20

Weight kg

13.0 (D 130.4 X-TRA)

13.8 (D-PG 130.4 X-TRA)

13.0 (D 140.4 X-TRA)

13.8 (D-PG 140.4 X-TRA)

Hand-arm vibration according to ISO 5349-1: Standard nozzle

m/s

< 2.5 ±1 < 2.5 ±1

Sound pressure level LpA in accordance with ISO 3744

dB(A) 77.2 ±2 77.2 ±2

Guaranteed sound power level LWA in accordance with 2000/14/EC

dB(A) 92 92

We reserve the right to make alterations.

19Original Instructions

SHU

12 Declaration of Conformity

We,

Nilﬁ sk A/S Kornmarksvej 1 DK-2605 Broendby DENMARK

Hereby solely declare, that the product:

Product Description Type

HPW - Consumer HPW - Consumer w/wireless remote*

220-240 V 1~, 50/60 Hz – IPX5

Nilﬁ sk D 130.4 X-TRA / D 140.4 X-TRA / D-PG 130.4 X-TRA / D-PG

140.4 X-TRA and accessory variants of above-mentioned types

Is in compliance with the following standards:

Id and Version Title

EN 60335-1:2012 Household and similar electrical appliances - Safety - Part 1: Gene-

ral requirements

EN 60335-2-79:2012 Household and similar electrical appliances - Safety - Part 2-79:

Particular requirements for high pressure cleaners and steam cleaners

EN 55014-1:2006+A1:2009 +A2:2011

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

EN 55014-2:1997+A1:2001 +A2:2008

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard

EN 61000-3-2:2014 (Class B) Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for

harmonic current emissions (equipment input current ≤ 16 A per phase)

EN 61000-3-11:2000 Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation

of voltage changes, voltage ﬂ uctuations and ﬂ icker in public low- voltage supply systems, for equipment with rated current ≤ 75 A per phase and subject to conditional connection

EN 50581:2012 Technical documentation for the assessment of electrical and

electronic products with respect to the restriction of hazardous substances

*EN 300 440-2 V1.4.1 ERM; Short range devices; Radio equipment to be used in the 1

GHz to 40 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

*EN 301 489-1 V1.9.2 EMC standard for radio equipment and services; Part 1: Common

technical requirements

*EN 301 489-3 V1.6.1 EMC standard for radio equipment and services; Part 3: Speciﬁ c

conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz

Following the provisions of:

Machinery Directive 2006/42/EC EMC Directive 2004/108/EC RoHS Directive 2011/65/EC Noise Emission Directive 2000/14/EC – Conformity assessment procedure according to Annex V. Measured noise level: 77 dB(A); Guaranteed noise level: 92 dB(A) * R&TTE Directive 1999/5/EC

Hadsund 27-07-2015 Anton Sørensen

Senior Vice President – Global R&D

Place Date Name, Title Signature

A1 A2

A4 A5

B14

B10

B 9

B3 B4 B5

Max. 60°C

B11 B12

B13

B15 B16 B17

A7 A8

b c

B19

B18

http://www.nilﬁ sk.com

HEAD QUARTER

DENMARK

Nilﬁ sk A/S Banemarksvej 58 DK-2605 Broendby Tel.: (+45) 4323 8100 Website: www.nilﬁ sk.com

SALES COMPANIES

ARGENTINA

Nilﬁ sk srl. Ediﬁ cio Central Park Herrera 1855, 6th ﬂ oor/604 Ciudad de Buenos Aires Tel.: (+54) 11 6091 1571 Website: www.nilﬁ sk.com.ar

AUSTRALIA

Nilﬁ sk Pty Ltd Unit 1/13 Bessemer Street Blacktown NSW 2148 Tel.: (+61) 2 98348100 Website: www.nilﬁ sk.com.au

AUSTRIA

Nilﬁ sk GmbH Metzgerstrasse 68 5101 Bergheim bei Salzburg Tel.: (+43) 662 456 400 90 Website: www.nilﬁ sk.at

BELGIUM

Nilﬁ sk n.v-s.a. Riverside Business Park Boulevard Internationalelaan 55 Bâtiment C3/C4 Gebouw Bruxelles 1070 Tel.: (+32) 14 67 60 50 Website: www.nilﬁ sk.be

BRAZIL

Nilﬁ sk do Brasil Av. Eng. Luis Carlos Berrini, 550 40 Andar, Sala 03 SP - 04571-000 Sao Paulo Tel.: (+11) 3959-0300 / 3945-4744 Website: www.nilﬁ sk.com.br

CANADA

Nilﬁ sk Canada Company 240 Superior Boulevard Mississauga, Ontario L5T 2L2 Tel.: (+1) 800-668-8400 Website: www.nilﬁ sk.ca

CHILE

Nilﬁ sk S.A. (Comercial KCS Ltda) Salar de Llamara 822 8320000 Santiago Tel.: (+56) 2684 5000 Website: www.nilﬁ sk.cl

CHINA

Nilﬁ sk 4189 Yindu Road Xinzhuang Industrial Park 201108 Shanghai Tel.: (+86) 21 3323 20000 Website: www.nilﬁ sk-cs.com

CZECH REPUBLIC

Nilﬁ sk s.r.o. VGP Park Horní Počernice Do Čertous 1/2658 193 00 Praha 9 Tel.: (+420) 244 090 912 Website: www.nilﬁ sk.cz

DENMARK

Nilﬁ sk Danmark A/S Industrivej 1 Hadsund, DK-9560 Tel.: 72 18 21 20 Website: www.nilﬁ sk.dk

FINLAND

Nilﬁ sk Oy Ab Koskelontie 23 E 02920 Espoo Tel.: (+358) 207 890 600 Website: www.nilﬁ sk.ﬁ

FRANCE

Nilﬁ sk SAS 26 Avenue de la Baltique Villebon sur Yvette 91978 Courtabouef Cedex Tel.: (+33) 169 59 87 00 Website: www.nilﬁ sk.fr

GERMANY

Nilﬁ sk GmbH Guido-Oberdorfer-Straße 2-10 89287 Bellenberg

Tel.: (+49) (0)7306/72-444 Website: www.nilﬁ sk.de

GREECE

Nilﬁ sk A.E.

Αναπαύσεως 29

Κορωπί Τ.Κ. 194 00

Tel.: (30) 210 9119 600 Website: www.nilﬁ sk.gr

HOLLAND

Nilﬁ sk B.V. Versterkerstraat 5 1322 AN Almere Tel.: (+31) 036 5460760 Website: www.nilﬁ sk.nl

HONG KONG

Nilﬁ sk Ltd. 2001 HK Worsted Mills Industrial Building 31-39, Wo Tong Tsui St. Kwai Chung, N.T. Tel.: (+852) 2427 5951 Website: nilﬁ sk.com

HUNGARY

Nilﬁ sk Kft. II. Rákóczi Ferenc út 10 2310 Szigetszentmiklós-Lakihegy Tel.: (+36) 24 475 550 Website: www.nilﬁ sk.hu

INDIA

Nilﬁ sk India Limited Pramukh Plaza, ‘B’ Wing, 4th ﬂ oor, Unit No. 403 Cardinal Gracious Road, Chakala Andheri (East) Mumbai 400 099 Tel.: (+91) 22 6118 8188 Website: www.nilﬁ sk.in

IRELAND

Nilﬁ sk 1 Stokes Place St. Stephen’s Green Dublin 2 Tel.: (+35) 3 12 94 38 38 Website: www.nilﬁ sk.ie

ITALY

Nilﬁ sk SpA Strada Comunale della Braglia, 18 26862 Guardamiglio (LO) Tel.: (+39) (0) 377 414021 Website: www.nilﬁ sk.it

JAPAN

Nilﬁ sk Inc. 1-6-6 Kita-shinyokohama, Kouhoku-ku Yokohama, 223-0059 Tel.: (+81) 45548 2571 Website: www.nilﬁ sk.com

MALAYSIA

Nilﬁ sk Sdn Bhd Sd 33, Jalan KIP 10 Taman Perindustrian KIP Sri Damansara 52200 Kuala Lumpur Tel.: (60) 3603 627 43 120 Website: www.nilﬁ sk.com

MEXICO

Nilﬁ sk de Mexico, S. de R.L. de C.V. Pirineos #515 Int. 60-70 Microparque Industrial WSantiago 76120 Queretaro Tel.: (+52) (442) 427 77 00 Website: www.nilﬁ sk.com

NEW ZEALAND

Nilﬁ sk Limited Danish House 6 Rockridge Avenue Penrose, Auckland 1061 Tel.: (+64) 9526 3890 Website: www.nilﬁ sk.com.au

NORWAY

Nilﬁ sk AS Bjørnerudveien 24 1266 Oslo Tel.: (+47) 22 75 17 80 Website: www.nilﬁ sk.no

PERU

Nilﬁ sk S.A.C. Calle Boulevard 162, Of. 703, Lima 33- Perú Lima Tel.: (511) 435-6840 Website: www.nilﬁ sk.com

POLAND

Nilﬁ sk Sp. Z.O.O. Millenium Logistic Park ul. 3 Maja 8, Bud. B4 05-800 Pruszków Tel.: (+48) 22 738 3750 Website: www.nilﬁ sk.pl

PORTUGAL

Nilﬁ sk Lda. Sintra Business Park Zona Industrial Da Abrunheira Ediﬁ cio 1, 1° A

P2710-089 Sintra

Tel.: (+351) 21 911 2670 Website: www.nilﬁ sk.pt

RUSSIA

Nilﬁ sk LLC Vyatskaya str. 27, bld. 7/1st 127015 Moscow Tel.: (+7) 495 783 9602 Website: www.nilﬁ sk.ru

SINGAPORE

Den-Sin 22 Tuas Avenue 2 639453 Singapore Tel.: (+65) 6268 1006 Website: www.densin.com

SLOVAKIA

Nilﬁ sk s.r.o. Bancíkovej 1/A SK-821 03 Bratislava Tel.: (+421) 910 222 928 Website: www.nilﬁ sk.sk

SOUTH AFRICA

WAP South Africa 12 Newton Street Spartan 1630 Tel.: (+27) 11 975 7060 Website: www.wap.com.za

SOUTH KOREA

Nilﬁ sk Korea 3F Duksoo B/D, 317-15 Sungsoo-Dong 2Ga Sungdong-Gu, Seoul Tel.: (+82) 2497 8636 Website: www.nilﬁ sk.co.kr

SPAIN

Nilﬁ sk S.A. Torre d’Ara, Passeig del Rengle, 5 Plta. 10

08302 Mataró Tel.: (34) 93 741 2400 Website: www.nilﬁ sk.es

SWEDEN

Nilﬁ sk AB Taljegårdsgatan 4 431 53 Mölndal Tel.: (+46) 31 706 73 00 Website: www.nilﬁ sk.se

SWITZERLAND

Nilﬁ sk AG Ringstrasse 19 Kircheberg/Industri Stelz 9500 Wil Tel.: (+41) 71 92 38 444 Website: www.nilﬁ sk.ch

TAIWAN

Nilﬁ sk Ltd Taiwan Branch (H.K) No. 5, Wan Fang Road Taipei Tel.: (+88) 6227 00 22 68 Website: www.nilﬁ sk.tw

THAILAND

Nilﬁ sk Co. Ltd. 89 Soi Chokechai-Ruammitr Viphavadee-Rangsit Road Ladyao, Jatuchak, Bangkok 10900 Tel.: (+66) 2275 5630 Website: www.nilﬁ sk.co.th

TURKEY

Nilﬁ sk A.S. Serifali Mh. Bayraktar Bulv. Sehit Sk. No:7 Ümraniye, 34775 Istanbul Tel.: +90 216 466 94 94 Website: www.nilﬁ sk.com.tr

UNITED ARAB EMIRATES

Nilﬁ sk Middle East Branch SAIF-Zone P.O. Box 122298 Sharjah Tel.: (+971) (0) 655-78813 Website: www.nilﬁ sk.com

UNITED KINGDOM

Nilﬁ sk Ltd. Nilﬁ sk House, Bowerbank Way Gilwilly Industrial Estate, Penrith Cumbria CA11 9BQ Tel: (+44) (0) 1768 868995 Website: www.nilﬁ sk.co.uk

UNITED STATES

Nilﬁ sk Inc. 14600 21st Avenue North Plymouth, MN-55447 Tel.: (+1) 800-989-2235 Website: www.nilﬁ sk.com

VIETNAM

Nilﬁ sk Vietnam No. 51 Doc Ngu Str. P. Vinh Phúc, Q.Ba Dinh Hanoi Tel.: (+84) 761 5642 Website: www.nilﬁ sk.com

Nilfisk-Advance D 130.4 X-TRA, D 140.4 X-TRA, D-PG 130.4 X-TRA, D-PG 140.4 X-TRA Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual