
56315312 SQUEEGEE WAND KIT
Convertamatic™ Models: All
BA625 series Models: ALL
Warrior™ Models: All
BA 755 series Models: All
Adhancer™ Models: All
BA 855 Trio EDS™ Models: All
AquaPLUS™ Models: All
CONTENTS OF KIT
ITEM PART NO. QTY DESCRIPTION
56040825 1 Instruction Sheet
1 56407361 4 Clamp, Plastic
2 56009030 8 Scr, Pan Phil Thd Form 10-24 x .38
3 56315232 1 Bracket, Wand
4 56315309 1 Wand, Squeegee
5 56315311 2 Bushing
6 56002292 2 Scr, Pan Phil 1/4-20 x 1.00
7 56315344 2 Gasket, 1/4 x 1/2 x 6
NOTE: Items (1, 2, 3 & 7) come preassembled.
© 2007 Nilfi sk-Advance, Inc.
page 1 of 3
11/04 revised 3/07 Form No. 56040825

INSTALLATION INSTRUCTIONS
1 See Figure 1. Locate the (2) Nutserts (A) behind the model decal on the left side of the machine.
2 Cut through the decal to expose both nutserts (A).
3 Install the (2) Bushings (5) using the (2) Screws (6) as shown.
4 Install the Wand Bracket Assembly (1, 2, 3 & 7) onto the Bushings (5) as shown.
5 Assemble the Wand Assembly (4) onto the Wand Bracket as shown.
FIGURE 1
Convertamatic™ model shown. Installation and use is the same on all models.
© 2007 Nilfi sk-Advance, Inc.
page 2 of 3
11/04 revised 3/07 Form No. 56040825

6 See Figure 2. To use the wand, disconnect the Vacuum Hose (B) from the squeegee and slip the Squeegee Wand (4) hose into the end of it.
7 Turn the Key Switch (C) ON and push the Wand Button (D) on the control panel.
NOTE: The steel tube of the wand is telescopic. To Lengthen or shorten; pull down on the Large Black Plastic Collar (E) to unlock and then pull
UP or push DOWN on the top portion of the steel tube (F).
FIGURE 2
Convertamatic™ model shown. Installation and use is the same on all models.
© 2007 Nilfi sk-Advance, Inc.
page 3 of 3
11/04 revised 3/07 Form No. 56040825