Electronic Service
Manuals
This electronic document is provided as a service to our customers.
We do not create the contents of the information contained in this document. Should you have detailed questions pertaining to the information
contained in this document, you may contact Michco, or the manufacturer which provided the original information in this electronic deliverable. Michco’s only part in this electronic deliverable was the electronic
assembly process. By providing this manual on line we are not guaranteeing parts availability.
You may contact Michco through the following methods:
Phone (517) 484-9312 or (800) 331-3339
2011 N. High St. -- Lansing, Michigan -- 48906
Fax: (517) 484-9836
Email: CustServe@Michco.com
Web site: www.Michco.Com
Parts Web site: www.FloorMachineParts.Com
Order Parts on Line at:
www.FloorMachineParts.Com
Directly to Parts & Service:
By Email: Shop@Michco.com
By Fax: (517) 702-2041
By Voice: Use numbers above.
Serving the Cleaning Industry Since 1922
Notice: All copyrighted material remains property of original owners, all trademarks are property of respective owners.
Manuals are subject to Manufacturer’s reproduction limitations. Originals or reproductions were provided by manufacturers
through a request. We make no warranty as to the correctness of information provided in this document and you assume
all risk. By placing these manuals on line we are not declaring our corporation to be an manufacturer authorized dealer or
provider, please check our web site for authorized manufacturers we represent.
ENGLISH
Models:
35, 55-1, 55-2, 75-1, 75- 2
VL 500
Service Manual
’’
2
Preface 3
Safety Issues 4
Technical specifications 5
Construction 12
Top 12
Container 15
Parts 18
Models:
35 18
55-1, 75-1 20
55-2, 75-2 21
55, 75 BSF, BDF 22
55, 75 EDF 23
Filter and Bags 24
Squeegee 24
Diagrams 25
Notes 26
VL500_Service_Manual_version_1.0_Feb_2013
3
Preface
In this manual you will find the essentials you need to know when repairing the wet and
dry vacuum cleaners in the VL500 series. When carrying out repairs, make sure you
have a suitable workbench or the like with the necessary water and power supply
available.
If you determine an error in operation, be sure to refer the customer to the user
manual.
A fault in the equipment can have a number of causes. The chapter ”service / repair”
will help you here. Use the illustrated spare parts lists for your repairs. These show you
the location of the individual parts and the sequence in which they are assembled.
Always refer to the technical service bulletin information sheets. Also known as
TSB’s
These will tell you about any technical modifications made after publication of this
service manual.
Only use original Nilfisk-Advance spare parts
It is under no circumstances legal to provide this service manual and any technical
service bulletin that might be released to third party without a written approval from the
Global Product Management group, located at
Sognevej 25, 2605 Brøndby, Denmark
VL500_Service_Manual_version_1.0_Feb_2013
4
Safety Issues
To be performed by a skilled or instructed person only !
Disconnect the vacuum cleaner from the power supply before
starting the work!
Safety instructions marked with this symbol in
this manual must be observed to prevent
danger to persons.
This symbol is used to mark safety
instructions that must be observed to prevent
damage to the equipment and degradation of
performance.
This symbol indicates tips and instructions to
simplify work and to ensure safe operation.
VL500_Service_Manual_version_1.0_Feb_2013
5
Technical specifications
Technical specification for the VL500 EU variants
VL500_Service_Manual_version_1.0_Feb_2013
6
Technical specifications
Technical specification for the VL500 UK variants
VL500_Service_Manual_version_1.0_Feb_2013
7
Technical specifications
Technical specification for the VL500 AU / NZ variants
VL500_Service_Manual_version_1.0_Feb_2013
8
Technical specifications
Technical specification for the VL500 US variants
VL500_Service_Manual_version_1.0_Feb_2013
Loading...