NILFISK ET610 100C User Manual
ET610
™
Portable Extractors
shown with optional
upgrade AquaWand
™
FACT SHEET
PERFORMANCE KEY FEATURES INCLUDE
• Ergonomic design allows for easier loading
and transport.
• Unique transport handle design makes
maneuverability, and control around facilities
a breeze.
• Handle on top of the tank assists in lifting,
loading/unloading and acts as a vacuum hose
guidance system.
• Recovery tank design – sloped tank design to
disposal hose makes for more complete emptying
of recovery tank and the recessed channel for
ball float reduces turbulence.
• Easy-fill solution tank access port is designed to
make it easier to fill from bucket at average lift
height. Located away from electronic switch and
controls reduces maintenance issues.
• Low moisture / environmental footprint reduction
system – Less water combined with higher heat
means faster drying, less chance of soil wicking
from pad or shrinkage. High heat system reduces
chemical usage in cleaning and reduces the need
for chemical sanitizing of surfaces.
• Wand caddy is molded right into the extractor,
allowing for easier mobility and transport.
• Recessed electronic switch plate protects switches
from solution tank and reduces water exposure.
ET610™ portable extractors are the culmination of a major engineering
and design initiative of Advance that emanated from direct field
input of cleaning technicians who used high performance portable
extraction machines every day. The ET610 represents a dramatic step
forward in implementing unique, productivity enhancing features that
considered even the minutest detail. These features go a step beyond
traditional componentry that is common to most extractors – pumps
and vacuum motors – and take into account the most common
annoyances expressed by cleaning technicians. For example, moving
the solution tank filling site to a location where the inevitable spill
does not come in contact with any electrical components or switches.
The ET610 has a 3-stage vacuum motor for unrestricted airflow and
superior water recovery. The closed, sealed system reduces wear and
extends vacuum motor life. A pressure gauge, pressure regulator
allows you to dial in specific pressure for sensitive texture, hard
and textile surfaces. Extension cord wraps protect cords and make
maneuverability and transport through facilities easier.
No detail was overlooked.
TYPICAL APPLICATIONS INCLUDE
• Government Buildings and Installations
• Contract Cleaners
• Office Buildings
• Hospitality Facilities
Advance
ET610
Portable Extractors
™
Recessed electronic switch plate
protects switches from solution
tank and reduces water exposure.
Two front panel roller wheels
assist in loading and unloading
from a transport vehicle.
Molded wand caddy for
easy transport.
Easy clam shell access for
maintenance.
12.5 gallon solution tank
1
11 gallon recovery tank
2
Two handles for easy maneuverability
3
Handle on tank to assist loading/
4
unloading and to guide vacuum hose
Oversized, rubber grip rear wheels
5
Easy-fill solution tank access port
6
4
2
3
Cleaning
Innovation...
6
1
5
• Our products are
designed using
innovative technology
that increases
productivity and drives
down the cost to clean.
• You can get expert
service and maintenance
for your Advance
machines from factorytrained personnel
around the world. Fast
parts delivery, too.
• Maintain peak
performance with
Nilfisk Parts.
Technical Specifications
™
Defining
Models ET610
Vacuum Single 5.7 in, 3-stage Single 5.7 in, 3-stage Single 5.7 in, 3-stage
Vac Shutoff Ball float Ball float Ball float
Pump Diaphragm pump Diaphragm pump Diaphragm pump
Waterlift None 140 in 140 in
Heat N/A 212° F Instant 212° F
Heater N/A 1,100 W 1,750 W
Pressure Gauge N/A N/A N/A
Wand 12 in stainless steel scrub wand 12 in stainless steel scrub wand 12 in stainless steel scrub wand
(AquaWand™ optional upgrade) (AquaWand™ optional upgrade) (AquaWand™ optional upgrade)
Cords Single Single Dual
Dimensions (L x W x H) 40.5 in x 21 in x 42 in 40.5 in x 21 in x 42 in 40.5 in x 21 in x 42 in
Weight 87 lb 87 lb 87 lb
CRI Certified None None Bronze
Part Number
Machine Only 56105292 56105294 56105293
With SS Wand & Hose 56105420 56105421 56105423
100C ET610
™
100SC
ET610
™
100H
The ET610™ comes standard with
a 12 inch stainless steel wand. The
AquaWand™ is an optional upgrade.
9435 Winnetka Avenue North
Brooklyn Park, MN 55445
www.advance-us.com
Phone: 800-850-5559
Fax: 800-989-6566
Specifications are subject to change without notice.
240 Superior Boulevard
Mississauga, Ontario, Canada L5T 2L2
www.nilfisk-advance.ca
Phone: 905-564-1149 or 800-668-8400
Fax: 905-564-1030 or 800-263-5111
©2015, Nilfisk, Inc. Printed in U.S.A.,
Form L3423A, 10-15
recyclable
Loading...