NILFISK ES300 ST User Manual
ES300™ ST/XP & ES400™ XLP
Self Contained Carpet Extractors
FACT SHEET
ACCESSORIES AND OPTIONS
• 16 inch (41 cm) nylon standard carpet brush (pn 56265044)
• 16 inch (41 cm) nylon hard floor brush (pn 56265175)
• 16 inch (41 cm) MidGrit 240 hard floor brush (pn 56265176)
• 18 inch (46 cm) nylon standard carpet brush (pn 56265099)
• 18 inch (46 cm) nylon hard floor brush (pn 56265177)
• 18 inch (46 cm) MidGrit 240 hard floor brush (pn 56265178)
• Wand assembly with soft and hard floor tools (pn 56314402)
• Wand assembly with soft floor tool (pn 56265173)
• Hand upholstery tool (pn 56220070)
• Heavy duty soft floor wand (pn 56265305)
• Plug adaptor kit (pn 56265309)
• 15 foot (4.6 m) solution and recovery hose assembly
(pn 56265174)
• Hose assembly – 96 inches (pn 56265753)
• Hose assembly – 184 inches (pn 56265754)
•
Hand tool / hoses assembly (pn 56265767)
•
Hand tool / hoses assembly upgrade for ES300 ST (pn 56265810)
• Hard floor tool assembly (pn 56265675)
CLEANING CARPET SPACES IN A BIG WAY.
With the introduction of the ES300™ and ES400™ self contained extractors, Advance has
entered a new era of carpet cleaning. Built on the industry leading AquaClean® platform,
these multi-purpose machines are ideal for cleaning your high-traffic carpeted areas.
Featuring LIFT
ES400™ XLP allow you to perform deep cleaning or interim cleaning with super-quick dry
times. With the Carpet and Rug Institute Seal of Approval, you can be certain that these
machines not only thoroughly remove dirt and water, but also meet the highest standards
in the industry to help extend the life of your carpets.
™ as well as our Dual Cleaning Mode technologies, the ES300™ XP and
A better design for greater productivity.
With multiple new features that decrease time-to-clean, the ES300™ XP and ES400™ XLP
models were designed to improve staff productivity. For example, each cleaning mode
(LIFT
™ Mode, Deep Clean and Pre-Treat) can be quickly engaged directly from the panel.
Plus, these machines are designed with increased tank capacity for extended operation as
well as improved water pickup capability for faster drying.
Making tough jobs easier.
The ES300 and ES400 not only increase productivity, they’re also very easy to operate.
One convenient feature is the front-mounted drain hose, which makes emptying the
tank much simpler. Integrated hand tool (standard on XP and XLP models) prevents
the loss and expense of replacement parts, and the brush head creates greater contact
with the carpet and improved suction, leaving carpets dryer after cleaning. Finally,
the compact design makes storage and maintenance much more convenient. These
innovative features, among others, are why Advance machines are some of the most
cutting edge and user-friendly available, making cleaning easier.
LIFT
™ your facility to a new level of clean.
The ES300 XP and ES400 XLP both feature the proprietary LIFT
for incredibly fast dry times. This patented Low-moisture — Interim-cleaning — Fast-dry
time — True-cleaning system consists of a single spray nozzle that eliminates streaking
and overlaps that lead to longer drying times. LIFT gives your carpets a thorough clean
yet leaves them ready for traffic in as little as 30 minutes, making these machines ideal
for high-traffic areas and daytime cleaning.
™ technology, allowing
TYPICAL APPLICATIONS INCLUDE
• Schools
• Healthcare Facilities
• Small Businesses
• Offices
• Retailers
Advance
ES300™ ST/XP & ES400™ XLP
Self Contained Carpet Extractors
All cleaning modes are mounted
on the panel for quick engagement
and easy operation. (XP and XLP
models)
An adjustable handle allows for
easy maneuverability, decreasing
the need for backing into tight
spaces. (ES400™ XLP shown)
The front-mounted nozzle makes
dumping much faster and easier
for the operator.
Simply flip a switch to easily shift
from spotting to extraction mode.
The removable, increased capacity
tank along with the stowable
handle make refilling much simpler.
5
The front-mounted drain hose
1
allows for faster and easier
dumping for the operator
Integrated hand tool offers quick access
2
and eliminates the need for replacement
parts (standard on XP and XLP models)
A floating brush head needs no
3
adjusting, creating better carpet
contact and improved water recovery
The removable tank with stowable
4
handle makes the re-filling process
far less cumbersome
All cleaning modes are mounted
5
on the panel for quick engagement
and easy operation
A larger tank with increased
6
water capacity provides
extended cleaning time and
fewer refills
New handle design means
7
improved maneuverability in
tight spaces
4 2
1
7
6
3
Defining
Cleaning
Innovation...
• Our products are
designed using
innovative technology
that increases
productivity and drives
down the cost to clean.
• You can get expert
service and maintenance
for your Advance
machines from factorytrained personnel
around the world. Fast
parts delivery, too.
• Maintain peak
performance with
Nilfisk Parts.
Technical Specifications
™
Models ES300
Cleaning Path 16 in (41 cm) 16 in (41 cm) 18 in (46 cm)
Solution Tank 9 gal (34 L) 9 gal (34 L) 12 gal (45 L)
Recovery Tank 7 gal (26.5 L) 7 gal (26.5 L) 10 gal (38 L)
Pump 120 psi 120 psi 120 psi
Flow Rate Interim Cleaning Mode N/A 0.17 gpm 0.17 gpm
Flow Rate Restorative Mode 0.7 gpm 0.7 gpm 0.7 gpm
Vacuum Motor 1.5 hp 3 stage 1.5 hp 3 stage 1.5 hp 3 stage
Waterlift 120 in 120 in 120 in
Brush Motor 1/3 hp 1/3 hp 1/3 hp
Brush Size 16 in (41 cm) 16 in (41 cm) 18 in (46 cm)
Vacuum Shoe Size 18.75 in (48 cm) 18.75 in (48 cm) 20.75 in (53 cm)
Flip Handle No No Yes
Power Cable 50 ft 50 ft 50 ft
Minimum Machine Length 28 in 28 in 29.25 in
Machine Width 19.25 in 19.25 in 22.75 in
Tank Height 32 in 32 in 35.25 in
Gross Weight 102 lb 106 lb 118 lb
Sound 68 dB A 68 dB A 68 dB A
Part Number 56265502 56265500 56265501
Specifications are subject to change without notice.
ST ES300
™
XP ES400
™
XLP
9435 Winnetka Avenue North
Brooklyn Park, MN 55445
www.advance-us.com
Phone: 800-850-5559
Fax: 800-989-6566
240 Superior Boulevard
Mississauga, Ontario, Canada L5T 2L2
www.nilfisk-advance.ca
Phone: 905-564-1149 or 800-668-8400
Fax: 905-564-1030 or 800-263-5111
©2016, Nilfisk, Inc. Printed in U.S.A.,
Form L3439A, 4-16
recyclable
Loading...