I N S T A L L A T I O N G U I D E
FOR USE WIT H COLOR CCTV C AMERA
D O M E C A M E R A K I T
CAM-DFMK
CONGRATULATIONS!
Thank you for choosing the CAM-DFMK Dome Camera Kit from Niles. With proper installation
and operation, you should enjoy years of trouble-free use.
Niles manufactures the industry’s most complete line of custom installation components and
accessories for audio/video systems. To see the complete Niles product assortment, visit us on
the Internet at: www.nilesaudio.com.
TABLE OF CONTENTS
Introduction 2
Features 2
Installation Considerations 3
Limited Warranty 8
Warranty Registration Card 9
1NILES AUDIO CORPORATION – 1-800-BUY-HIFI
INTRODUCTION
NILES’ CAM-DFMK Dome Camera Kit is designed to enhance the installation options of the CAM-PB
Color CCTV camera (sold separately). Available in white or black, this unit enables flush-mount or
surface-mount options for discrete, attractive CCTV camera installation. Please see the CAM-PB color
CCTV Camera pre-wire and installation instructions for detailed specifications for the CAM-PB.
The dome assembly can be installed flush-mount or surface-mount depending on the application.
Installers desiring stealthy, low-profile mounting should use the flush-mount option, while
retro-fit applications take advantage of the surface-mount option. Hardware is included for both
installation methods.
FEATURES
• Low-Profile/Small Size
• Flush-Mount/Surface-Mount
• Easy Assembly/Installation
2
INSTALLATION
Main
bracket
Camera
housing base
Camera
housing top
Dome
Use 1/2" Screws
Use 1/2" Screws
Main
bracket
Camera
housing base
Camera
housing top
Dome
Use 1/2" Screws
Use 1/4" Screws
Use 1/2" Screws
1. Adjust view
2.Tighten screws
Camera
housing base
Camera
housing top
Dome
Use 1/2" Screws
Use 1/4" Screws
Use 1/2" Screws
1. Adjust view
2.Tighten screws
Use 1/2" Screws
Use 1/2" Screws
Camera
housing base
Camera
housing top
Dome
Use 1/2" Screws
Use 1/4" Screws
Use 1/2" Screws
1. Adjust view
2.Tighten screws
SURFACE MOUNT
The surface-mount hardware included with the Dome Camera Kit allows easy installation in
almost any situation–including retro-fit applications. Provisions must be made for physical wire
connections, but the camera assembly itself is simply screwed in place.
TO INSTALL CAMERA USING SURFACE-MOUNT KIT:
Figure 1
1. Drill 3/4” diameter hole in mounting surface to accommodate wiring.
2. Mount main bracket to desired location using three 1/2” screws.
Figure
3. Place camera inside of camera housing base. Make sure wires extend through base.
2
4. Place camera housing top on camera housing base and secure with two 1/4” screws.
Figure
3
NILES AUDIO CORPORATION – 1-800-BUY-HIFI
3
Camera
housing base
Camera
housing top
Dome
Use 1/2" Screws
Use 1/2" Screws
Use 1/2" Screws
Use 1/2" Screws
1. Adjust view
2.Tighten screws
Camera
housing top
Dome
Use 1/2" Screws
Use 1/2" Screws
1. Adjust view
2.Tighten screws
Remove
Red
Black
+
–
Stripe = +
12VDC
RG6 or
RG59
Coax
Male RCA to
female F
connector
To video display,
Z880, MOD3000 etc.
Supplied with CAM-PB
1. Adjust view
1. Adjust view
2.Tighten screws
Use 1/2" Screws
Use 1/2" Screws
Use 1/2" Screws
Use 1/2" Screws
1. Adjust view
2.Tighten screws
Supplied with CAM-PB
1. Adjust view
2.Tighten screws
5. Feed camera leads through hole in mounting surface. Connect wires (see WIRING.)
6. Place assembled camera housing into main bracket.
7. Place dome over camera housing and attach to main bracket with 3 large screws.
Do not tighten completely.
Figure 4
8. Make provisions to view the camera image and point the camera at the desired location.
Note: Make sure image is level!
9. With camera properly aimed, tighten screws.
Figure 5
WIRING
NOTE: THE CAM-PB REQUIRES RG6 OR RG59 COAXIAL CABLE FOR VIDEO, AND TWO-CONDUCTOR,
18 AWG WIRE FOR POWER. USE THE CAMERA’S INCLUDED POWER SUPPLY FOR PROPER
OPERATION. NO CABLES OR WIRES ARE SHIPPED WITH THE CAMERA KIT.
Figure
6
4
FLUSH-MOUNT
Main
bracket
Camera
housing base
Camera
housing top
Bayonet
mount
Trim ring
3 1/4" inch
diameter hole
3 1/4" inch
diameter hole
Main
bracket
Camera
housing base
Camera
housing top
Bayonet
mount
Trim ring
3 1/4" inch
diameter hole
Use 1/4" screws
3 1/4" inch
diameter hole
Use 1/2" screws
3 1/4" inch
diameter hole
3 1/4" inch
diameter hole
Use 1/2" screws
The flush-mount kit is used to acheive low-profile installations where stealth and concealment are
priorities. A hole must be cut in the desired mounting surface.
Figure 7
TO INSTALL CAMERA USING FLUSH-MOUNT KIT:
1. Cut a 3 1/4” diameter hole in mounting surface.
8
Figure
2. Place camera inside of camera housing base. Make sure wires extend through base.
3. Place camera housing top on camera housing base and secure with two 1/4” screws.
9
Figure
4. Connect wires.
5. Place assembled camera housing into main bracket. Place bayonet mount over camera housing
Figure 10
and attach to main bracket with three 1/2” screws. Do not tighten completely.
NILES AUDIO CORPORATION – 1-800-BUY-HIFI
5
6. Place entire assembly into hole.
Main
bracket
Camera
housing base
Camera
housing top
Bayonet
mount
Trim ring
3 1/4" inch
diameter hole
Use 1/4" screws
Use 1/2" screws
Rear view
Front view
3 1/4" inch
diameter hole
Use 1/2" screws
Front view
Main
bracket
Camera
housing base
Camera
housing top
Bayonet
mount
Trim ring
3 1/4" inch
diameter hole
Use 1/4" screws
Use 1/2" screws
Rear view
Front view
Access holes
3 1/4" inch
diameter hole
Use 1/2" screws
Rear view
3 1/4" inch
diameter hole
Use 1/2" screws
Rear view
Front view
Access holes
Figure 11
7. Turn dog screws clockwise until dogs are snug. Over-tightening dogs can keep trim ring from
snapping in place. If trim ring does not snap into place, loosen screws slightly.
Figure 12
NOTE: ACCESS HOLES ARE PROVIDED TO LOOSEN DOGS IN CASE THEY BECOME STUCK.
8. Make provisions to view the camera image and point the camera at the desired location.
IMPORTANT
: MAKE SURE THAT THE IMAGE IS LEVEL!
9. With camera properly aimed, tighten screws.
10. Align trim ring with slots in bayonnet mount. Snap in place.
11. To remove trim ring, insert small, flat screwdriver tip into one of three slots on outer edge
and pry off.
6
Figure 13
NOTES
NILES AUDIO CORPORATION – 1-800-BUY-HIFI
7
LIMITED WARRANTY
Niles Audio Corporation (“NILES”) warrants its passive products (those not requiring AC or battery power) to the original
purchaser to be free of manufacturing defects in material and workmanship for a period of ten years from date of purchase.
Niles Audio Corporation (“NILES”) warrants its passive loudspeaker products (those not requiring AC or battery power) to
the original purchaser to be free of manufacturing defects in material and workmanship for a period of five years from
date of purchase.
Niles Audio Corporation (“NILES”) warrants its outdoor loudspeaker products to the original purchaser to be free of
manufacturing defects in material and workmanship for a period of two years from date of purchase.
Niles Audio Corporation (“NILES”) warrants its active products (those requiring AC or battery power) to the original purchaser
to be free of manufacturing defects in material and workmanship for a period of two years from date of purchase.
This Warranty is subject to the following additional conditions and limitations. The Warranty is void and inapplicable if
NILES deems that the product has been used or handled other than in accordance with the instructions provided by
the manufacturer, including but not limited to damage caused by accident, mishandling, improper installation, abuse,
negligence, or normal wear and tear, or any defect caused by repair to the product by anyone other than NILES or an
authorized NILES dealer.
To obtain warranty service, take the unit to the nearest authorized NILES dealer, who will test the product and if
necessary, forward it to NILES for service. If there are no authorized NILES dealers in your area, you must write to NILES
and include your name, model and serial number of your unit, along with a brief description of the problem. A factory
Return Authorization Number will be sent to you. DO NOT RETURN ANY UNIT WITHOUT FIRST RECEIVING WRITTEN
AUTHORIZATION AND SHIPPING INSTRUCTIONS FROM NILES.
If the above conditions are met, the purchaser’s sole remedy shall be to return the product to NILES, in which case
NILES will repair or replace, at its sole option, the defective product without charge for parts or labor. NILES will return
a unit repaired or replaced under warranty by shipping same by its usual shipping method from the factory (only) at its
expense within the United States of America. THERE ARE NO OTHER WARRANTIES, INCLUDING WITHOUT LIMITATION,
EITHER EXPRESS OR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WITH
RESPECT TO THE PRODUCT.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER/
PURCHASER. NILES SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES EXCEPT TO THE
EXTENT PROVIDED (OR PROHIBITED) BY APPLICABLE LAW.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation
may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
For the name of your nearest authorized NILES dealer, contact:
NILES AUDIO CORPORATION, P.O. BOX 160818, Miami, Florida 33116.
Please fill in your product information and retain for your records.
Model______________________ Serial No.___________________ Purchase Date_______
8
WARRANTY REGISTRATION CARD
Model Purchased _________________________________________________________
Serial Number ___________________________________________________________
Date Purchased (month/day/year) _____________________________________________
Dealer Name and Location __________________________________________________
______________________________________________________________________
❍
Dr.
❍
Miss
❍
Mr.
❍
Mrs.
❍
Ms.
Name__________________________________________________________________
Address________________________________________________________________
______________________________________________________________________
City_______________________________________State________________Zip ______
Telephone ( ) _________________________________________________
Please take a moment to fill out our warranty registration card. The information helps us to get to
know you better and develop the products you want
Age:
❍
Under 25
❍
25-34
❍
35-44
❍
45-54
❍
55 & over
Income:
❍
Under $24,999
❍
$25,000-$34,999
❍
$35,000-$44,999
❍
$45,000-$59,999
❍
$60,000-$74,999
❍
$75,000-$99,999
❍
Over $99,999
Occupation:
❍
Arts/Entertainment
❍
Business Owner
❍
Engineer
❍
Finance/Accounting
❍
General Office
❍
Management
❍
Professional
❍
Sales/Marketing
❍
Student
❍
Tradesperson
DETACH HERE AND RETURN TO: NILES AUDIO CORPORATION WARRANTY REGISTRATION DEPT. P.O. BOX 160818 MIAMI, FLORIDA 33116-0818
Musical tastes:
(Please check
all that apply)
❍
Alternative
❍
Classical
❍
Country
❍
Jazz
❍
New Age
❍
Popular
❍
R&B
❍
Rock
❍
Other _____________
How did you hear
about Niles?
❍
Architect/Developer
❍
Custom Installer
❍
Direct Mail
❍
Friend/Family
❍
In-Store Display
❍
Interior Designer
❍
Magazine Ad
❍
Mail-Order Catalog
❍
Newspaper Ad
❍
Product Brochure
❍
Product Review
❍
Retail Salesperson
What magazines
do you read?
1. ________________
2. ________________
3. ________________
Who will install
the product?
❍
Custom Installer
❍
Electrician
❍
Friend
❍
Myself
Which factor(s) influenced
the purchase of your Niles
product? (Please check
all that apply)
❍
Ease of Use
❍
Price/Value
❍
Product Features
❍
Quality/Durability
❍
Reputation
❍
Style/Appearance
❍
Warranty
Do you . . . ?
❍
Own a House. If yes,
how many square feet?
❍
Own a Town House/
Condominium/Co-op
❍
Rent an Apartment
❍
Rent a House
Are you interested in
receiving literature on
other Niles products?
❍
Yes ❍ No
Are there products/
capabilities that you would
like to see introduced?
B L E N D I N G H I G H F I D E L I T Y A N D A R C H I T E C T U R E
®
1 2 3 3 1 S . W . 1 3 0 S t r e e t M i a m i , F l o r i d a 3 3 1 8 6
N i l e s A u d i o C o r p o r a t i o n
D e s i g n e d a n d E n g i n e e r e d i n t h e U S A
M a d e i n
©2 00 5 Ni le s Au di o Co rp or at io n. A ll r igh ts r es er ve d. N il es , th e Ni le s lo go s an d
Bl en di ng H ig h Fi de li ty a nd A rc hi te ct ure a re r eg is te re d tr ad em ar ks o f Ni le s Au dio C or po ra ti on .
Al l ot he r tr ad em ar ks a re t he p ro pe rt y o f th ei r re sp ec ti ve o wn er s. 1 2 /0 5 DS 0 04 70 A CN 99 0 08 02 A
C h i n a
Loading...