Nikon Z 7II User's Manual

DIGITAL CAMERA

User's Manual

• Read this manual thoroughly before using the camera.

• To ensure proper use of the camera, be sure to read
“For Your Safety” (page x).

• After reading this manual, keep it in a readily accessible
place for future reference.

En

When Your First Photo Can’t Wait

64

GB

Getting Ready

❚❚

1

Insert the battery (07).

For information on charging the
battery, see “Charging the Battery”
(02).

2

Insert a memory card (09).

3

Attach a lens (012).

•

Align the white dot on the lens with
the white dot on the camera body
(q) and rotate the lens in the

w

direction shown (

•

A strap can be attached to the
camera. For more information, see
“Attaching the Strap” (01).

4

Turn the camera on and then
choose a language and set the
clock (014).

).

Z 7II Model Name: N1932
Z 6II Model Name: N1929

When Your First Photo Can’t Wait

ii

Take (018) and View (028) Pictures

❚❚

1

Rotate the mode dial to b.

2

To focus, press the shutter­release button halfway (i.e,
lightly press the shutter­release button, stopping when
it is pressed halfway).

3

Without lifting your finger
from the shutter-release
button, press the button the
rest of the way down to take
the picture.

4

View the picture.

When Your First Photo Can’t Wait

iii

Package Contents

Be sure all items listed here were included with your camera.

Camera

❏

BF-N1 body cap

❏

DK-29 rubber eyecup

❏

(comes attached to
camera)

•

Memory cards are sold separately.

EN-EL15c rechargeable

❏

Li-ion battery with terminal
cover

MH-25a battery charger

❏

(comes with either an AC
wall adapter or power
cable of a type and shape
that varies with the country
or region of sale)

HDMI/USB cable clip

❏

EH-7P charging AC adapter

❏

(Z 7II only; supplied with a
plug adapter attached in
countries or regions where
required; shape depends
on country of sale—

AN-DC19 strap

❏

Warranty (printed on the

❏

back cover of this manual)

User’s Manual

❏

UC-E24 USB cable

❏

BS-1 accessory shoe cover

❏

0

4)

iv

Package Contents

Lens Kit Lenses

D

For information on lenses supplied as part of a lens kit, see the lens
manuals available for download from the Nikon Download Center.

The Nikon Download Center

D

A pdf version of this manual is available from the Nikon
Download Center, together with an English-language
reference manual with detailed operating instructions,
which can be viewed online in html. Visit the Nikon
Download Center to download firmware updates,
ViewNX-i, Capture NX-D, and other Nikon computer software, and
manuals for other Nikon products including cameras, NIKKOR lenses, and
flash units.
https://downloadcenter.nikonimglib.com/

Package Contents

v

About This Manual

Symbols

❚❚

The following symbols and conventions are employed in this
manual. Use them to help locate the information you need.

This icon marks notes, information that should be read before

D

using this product.

This icon marks tips, additional information you may find

A

helpful when using this product.

This icon marks references to other sections in this manual.

0

Conventions

❚❚

•

This manual is for use with both the Z 7II and Z 6II. The
illustrations show the Z 6II.

•

This camera uses CFexpress (Type B), XQD, SD, SDHC, and
SDXC memory cards. Memory cards of all types are referred to
throughout this manual as “memory cards”. Where it is
necessary to distinguish between the different types, the
terms “CFexpress memory card”, “XQD memory card”, and “SD
memory card” may be used.

•

Throughout this manual, battery chargers are referred to as
“battery chargers” or “chargers”.

•

Throughout this manual, the display in camera monitor and
viewfinder during shooting is referred to as the “shooting
display”; in most cases, the illustrations show the monitor.

•

Throughout this manual, smartphones and tablets are referred
to as “smart devices”.

•

Throughout this manual, the term “default settings” is used to
refer to the settings in effect at shipment. The explanations in
this manual assume that default settings are used.

vi

About This Manual

For Your Safety

A

“For Your Safety” contains important safety instructions. Be sure to read
them before using the camera. For more information, see “For Your
Safety” (

❚❚

x).

0

Nikon User Support

Visit the site below to register your camera and keep up-to-date
with the latest product information. You will find answers to
frequently asked questions (FAQs) and can contact us for
technical assistance.
https://www.europe-nikon.com/support

About This Manual

vii

Table of Contents

When Your First Photo Can’t Wait ..................................................... ii

Package Contents................................................................................... iv

About This Manual ................................................................................. vi

For Your Safety ......................................................................................... x

Notices....................................................................................................... xv

First Steps 1

Attaching the Strap................................................................................. 1

Charging the Battery .............................................................................. 2

The Battery Charger......................................................... 2

Charging AC Adapters .................................................... 4

Inserting the Battery............................................................................... 7

Removing the Battery ..................................................... 7

Battery Level....................................................................... 8

Inserting Memory Cards........................................................................ 9

Removing Memory Cards ........................................... 10

Attaching a Lens ................................................................................... 12

Detaching Lenses........................................................... 13

Choose a Language and Set the Clock ......................................... 14

viii

Table of Contents

Basic Photography and Playback 18

Taking Photographs (b Mode) ....................................................... 18

Shooting Movies (

Playback ................................................................................................... 28

Viewing Photos............................................................... 28

Viewing Movies .............................................................. 29

Mode) .............................................................. 24

b

Troubleshooting 30

Before Contacting Customer Support .......................................... 30

Technical Notes 31

Caring for the Camera......................................................................... 31

Storage .............................................................................. 31

Caring for the Camera and Battery: Cautions............................. 32

Camera Care .................................................................... 32

Battery Care...................................................................... 37

Using the Charger.......................................................... 40

Using the Charging AC Adapter............................... 40

Trademarks and Licenses................................................................... 41

Notices...................................................................................................... 45

Bluetooth and Wi-Fi (Wireless LAN) ............................................... 48

Warranty Terms - Nikon Europe Service Warranty ................... 55

Table of Contents

ix

For Your Safety

To prevent damage to property or injury to yourself or to others, read “For
Your Safety” in its entirety before using this product.

Keep these safety instructions where all those who use this product will
read them.

DANGER: Failure to observe the precautions marked with this icon

A

carries a high risk of death or severe injury.

WARNING: Failure to observe the precautions marked with this icon

A

could result in death or severe injury.

CAUTION: Failure to observe the precautions marked with this icon

A

could result in injury or property damage.

WARNING

A

Do not use while walking or operating a vehicle.

Failure to observe this precaution could result in accidents or other
injury.

Do not disassemble or modify this product. Do not touch internal
parts that become exposed as the result of a fall or other accident.

Failure to observe these precautions could result in electric shock or
other injury.

Should you notice any abnormalities such as the product producing
smoke, heat, or unusual odors, immediately disconnect the battery
or power source.

Continued operation could result in fire, burns or other injury.

Keep dry. Do not handle with wet hands. Do not handle the plug
with wet hands.

Failure to observe these precautions could result in fire or electric shock.

x

For Your Safety

Do not let your skin remain in prolonged contact with this product
while it is on or plugged in.

Failure to observe this precaution could result in low-temperature burns.

Do not use this product in the presence of flammable dust or gas
such as propane, gasoline or aerosols.

Failure to observe this precaution could result in explosion or fire.

Do not directly view the sun or other bright light source through the
lens.

Failure to observe this precaution could result in visual impairment.

Do not aim the flash or AF-assist illuminator at the operator of a
motor vehicle.

Failure to observe this precaution could result in accidents.

Keep this product out of reach of children.

Failure to observe this precaution could result in injury or product
malfunction. In addition, note that small parts constitute a choking
hazard. Should a child swallow any part of this product, seek immediate
medical attention.

Do not entangle, wrap or twist the straps around your neck.

Failure to observe this precaution could result in accidents.

Do not use batteries, chargers, or AC adapters not specifically
designated for use with this product. When using batteries,
chargers, and AC adapters designated for use with this product, do
not:

•

Damage, modify, forcibly tug or bend the cords or cables, place
them under heavy objects, or expose them to heat or flame.

•

Use travel converters or adapters designed to convert from one
voltage to another or with DC-to-AC inverters.

Failure to observe these precautions could result in fire or electric shock.

For Your Safety

xi

Do not handle the plug when charging the product or using the AC
adapter during thunderstorms.

Failure to observe this precaution could result in electric shock.

Do not handle with bare hands in locations exposed to extremely
high or low temperatures.

Failure to observe this precaution could result in burns, or frostbite.

CAUTION

A

Do not leave the lens pointed at the sun or other strong light
sources.

Light focused by the lens could cause fire or damage to product’s
internal parts. When shooting backlit subjects, keep the sun well out of
the frame. Sunlight focused into the camera when the sun is close to the
frame could cause fire.

Turn this product off when its use is prohibited. Disable wireless
features when the use of wireless equipment is prohibited.

The radio-frequency emissions produced by this product could interfere
with equipment onboard aircraft or in hospitals or other medical
facilities.

Remove the battery and disconnect the AC adapter if this product
will not be used for an extended period.

Failure to observe this precaution could result in fire or product
malfunction.

Do not fire the flash in contact with or in close proximity to the skin
or objects.

Failure to observe this precaution could result in burns or fire.

xii

For Your Safety

Do not leave the product where it will be exposed to extremely high
temperatures, for an extended period such as in an enclosed
automobile or in direct sunlight.

Failure to observe this precaution could result in fire or product
malfunction.

Do not look directly at the AF-assist illuminator.

Failure to observe this precaution could have adverse effects on vision.

Do not transport cameras or lenses with tripods or similar
accessories attached.

Failure to observe this precaution could result in injury or product
malfunction.

Do not touch the memory card when a high-temperature
warning is displayed in the monitor or viewfinder.

The memory card will be hot, potentially causing burns or
causing the card to be dropped and damaged when
removed.

DANGER (Batteries)

A

Do not mishandle batteries.

Failure to observe the following precautions could result in the batteries
leaking, overheating, rupturing, or catching fire:

•

Use only rechargeable batteries approved for use in this product.

•

Do not expose batteries to flame or excessive heat.

•

Do not disassemble.

•

Do not short-circuit the terminals by touching them to necklaces,
hairpins, or other metal objects.

•

Do not expose batteries or the products in which they are inserted to
powerful physical shocks.

•

Do not step on batteries, pierce them with nails, or strike them with
hammers.

Charge only as indicated.

Failure to observe this precaution could result in the batteries leaking,
overheating, rupturing, or catching fire.

For Your Safety

xiii

If battery liquid comes into contact with the eyes, rinse with plenty
of clean water and seek immediate medical attention.

Delaying action could result in eye injuries.

Follow the instructions of airline personnel.

Batteries left unattended at high altitudes in an unpressurized
environment may leak, overheat, rupture, or catch fire.

WARNING (Batteries)

A

Keep batteries out of reach of children.

Should a child swallow a battery, seek immediate medical attention.

Keep batteries out of reach of household pets and other animals.

The batteries could leak, overheat, rupture, or catch fire if bitten,
chewed, or otherwise damaged by animals.

Do not immerse batteries in water or expose to rain.

Failure to observe this precaution could result in fire or product
malfunction. Immediately dry the product with a towel or similar object
should it become wet.

Discontinue use immediately should you notice any changes in the
batteries, such as discoloration or deformation. Cease charging
EN-EL15c rechargeable batteries if they do not charge in the
specified period of time.

Failure to observe these precautions could result in the batteries leaking,
overheating, rupturing, or catching fire.

When batteries are no longer needed, insulate the terminals with
tape.

Overheating, rupture, or fire may result should metal objects come into
contact with the terminals.

If battery liquid comes into contact with a person's skin or clothing,
immediately rinse the affected area with plenty of clean water.

Failure to observe this precaution could result in skin irritation.

xiv

For Your Safety

Notices

•

No part of the manuals included with this product may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into
any language in any form, by any means, without Nikon’s prior written
permission.

•

Nikon reserves the right to change the appearance and specifications of
the hardware and software described in these manuals at any time and
without prior notice.

•

Nikon will not be held liable for any damages resulting from the use of
this product.

•

While every effort has been made to ensure that the information in
these manuals is accurate and complete, we would appreciate it were
you to bring any errors or omissions to the attention of the Nikon
representative in your area (address provided separately).

●

Notice Concerning Prohibition of Copying or Reproduction

Note that simply being in possession of material that has been digitally
copied or reproduced by means of a scanner, digital camera, or other
device may be punishable by law.

•

Items prohibited by law from being copied or reproduced

Do not copy or reproduce paper money, coins, securities, government
bonds, or local government bonds , even if such copies or reproductions
are stamped “Sample”.

The copying or reproduction of paper money, coins, or securities which
are circulated in a foreign country is prohibited.

Unless the prior permission of the government has been obtained, the
copying or reproduction of unused postage stamps or post cards issued
by the government is prohibited.

The copying or reproduction of stamps issued by the government and
of certified documents stipulated by law is prohibited.

Notices

xv

•

Cautions on certain copies and reproductions

The government has issued cautions on copies or reproductions of
securities issued by private companies (shares, bills, checks, gift
certificates, etc.), commuter passes, or coupon tickets, except when a
minimum of necessary copies are to be provided for business use by a
company. Also, do not copy or reproduce passports issued by the
government, licenses issued by public agencies and private groups, ID
cards, and tickets, such as passes and meal coupons.

•

Comply with copyright notices

Under copyright law, photographs or recordings of copyrighted works
made with the camera cannot be used without the permission of the
copyright holder. Exceptions apply to personal use, but note that even
personal use may be restricted in the case of photographs or recordings
of exhibits or live performances.

●

Use Only Nikon Brand Electronic Accessories

Nikon cameras are designed to the highest standards and include
complex electronic circuitry. Only Nikon brand electronic accessories
(including lenses, chargers, batteries, AC adapters, and flash accessories)
certified by Nikon specifically for use with this Nikon digital camera are
engineered and proven to operate within the operational and safety
requirements of this electronic circuitry.

The use of non-Nikon electronic accessories could damage
the camera and may void your Nikon warranty. The use of
third-party rechargeable Li-ion batteries not bearing the
Nikon holographic seal shown at right could interfere with normal
operation of the camera or result in the batteries overheating, igniting,
rupturing, or leaking.
For more information about Nikon brand accessories, contact a local
authorized Nikon dealer.

xvi

Notices

Before Taking Important Pictures

D

Before taking pictures on important occasions (such as at weddings or
before taking the camera on a trip), take a test shot to ensure that the
camera is functioning normally. Nikon will not be held liable for damages
or lost profits that may result from product malfunction.

Life-Long Learning

D

As part of Nikon’s “Life-Long Learning” commitment to ongoing product
support and education, continually-updated information is available
on-line at the following sites:

•

For users in the U.S.A.: https://www.nikonusa.com/

•

For users in Europe:
https://www.europe-

•

For users in Asia, Oceania, the Middle East, and Africa:

https://www.nikon­Visit these sites to keep up-to-date with the latest product information,
tips, answers to frequently-asked questions (FAQs), and general advice on
digital imaging and photography. Additional information may be
available from the Nikon representative in your area. See the following
URL for contact information: https://imaging.nikon.com/

nikon.com/support/

asia.com/

Notices

xvii

xviii

Notices

First Steps

Attaching the Strap

To attach a strap (whether the supplied strap or one that has
been purchased separately):

Attaching the Strap

1

Charging the Battery

Charge the supplied EN-EL15c battery before use.

The Battery and Charger

D

Read and follow the warnings and cautions in “For Your Safety” (0x) and
“Caring for the Camera and Battery: Cautions” (

The Battery Charger

Depending on the country or region, the charger comes with
either an AC wall adapter or a power cable.

•

AC wall adapter: After inserting the AC wall adapter into the

q

charger AC inlet (

w

(

) and rotate the adapter 90 ° to fix it in place (e).

), slide the AC wall adapter latch as shown

32).

0

2

Charging the Battery

•

Power cable: After connecting the power cable with the plug

in the orientation shown, insert the battery and plug the cable

in.

•

An exhausted battery will fully charge in about 2 hours and

35 minutes.

Battery charging (flashes) Charging complete (steady)

If the CHARGE Lamp Flashes Rapidly

D

If the CHARGE lamp flashes rapidly (8 times a second):

•

A battery charging error has occurred: Unplug the charger and

remove and reinsert the battery.

•

The ambient temperature is too hot or too cold: Use the battery

charger at temperatures within the designated temperature range (0–

40 °C/+32–104 °F).
If the problem persists, unplug the charger and end charging. Bring the
battery and charger to a Nikon-authorized service representative.

Charging the Battery

3

Charging AC Adapters

When a battery is inserted in the camera, an EH-7P charging AC
adapter (available separately for the Z 6II, supplied with the
Z 7II) can be used to charge the battery or power the camera.

•

EN-EL15a or EN-EL15 batteries cannot be charged using a
charging AC adapter. Use an MH-25a battery charger instead.

•

If [Enable] is selected for [USB power delivery] in the setup
menu, the charging AC adapter can be used to power the
camera. The batteries will not charge while the camera is
powered by an outside source.

1

Insert the EN-EL15c into the
camera (

0

7).

4

Charging the Battery

2

After confirming that the camera is off, connect

q

the charging AC adapter (

) and plug the adapter

in.

Keep the plug straight during insertion and removal.

Charging

•

The battery charges while the camera is off.

•

The camera charge lamp (w) lights amber while charging is
in progress. The lamp turns off when charging is complete.

•

An exhausted battery will fully charge in about 2 hours and
45 minutes.

Power Delivery

The camera will draw power from the adapter while on.

Charging the Battery

5

3

Unplug the charging AC adapter when charging is
complete or when it is no longer needed to power
the camera.

The Charging AC Adapter

D

If the battery cannot be charged using the charging AC adapter, for
example because the battery is not compatible or the temperature of the
camera is elevated, the charge lamp will flash rapidly for about
30 seconds and then turn off. If the charge lamp is off and you did not
observe the battery charging, turn the camera on and check the battery
level.

Computer USB Power Delivery and Battery Charging

A

•

Computers will supply current to power the camera or charge the
battery only when connected via a UC-E25 USB cable (available
separately). The supplied USB cable cannot be used for this purpose.

•

Depending on the model and product specifications, some computers
will not supply current to power the camera or charge the battery.

6

Charging the Battery

Inserting the Battery

•

Turn the camera off before inserting or removing the battery.

•

Using the battery to keep the orange battery latch pressed to

one side, slide the battery into the battery chamber until the

latch locks it in place.

Removing the Battery

To remove the battery, turn the camera
off and open the battery-chamber cover.
Press the battery latch in the direction
shown by the arrow to release the
battery and then remove the battery by
hand.

Inserting the Battery

7

Battery Level

•

The battery level is shown in the shooting display and control
panel while the camera is on.

Monitor Viewfinder Control panel

•

The battery level display changes as the battery level
diminishes, from
battery level falls to
battery or ready a spare battery.

•

If the message [Shutter release disabled. Recharge battery.]
is displayed, charge or exchange the battery.

through K, J, I, and H. When the

L

, suspend shooting and charge the

H

8

Inserting the Battery

Inserting Memory Cards

128

GB

64

GB

The camera is equipped with two
memory card slots: a slot that takes one
CFexpress or XQD memory card (q) and
another that takes one SD memory card
(w), for a total of two cards, one of each
type.

•

Turn the camera off before inserting or removing memory

cards.

•

Holding the memory card in the orientation shown, slide it

straight into the slot until it clicks into place.

- CFexpress and XQD memory cards:

- SD memory cards:

Inserting Memory Cards

9

Removing Memory Cards

16

GB

After confirming that the memory card
access lamp is off, turn the camera off,
open the memory card slot cover, and
press the card in to eject it (
can then be removed by hand (

Memory Cards

D

•

Memory cards may be hot after use. Observe due caution when
removing memory cards from the camera.

•

Do not perform the following operations during formatting or while
data are being recorded, deleted, or copied to a computer or other
device. Failure to observe these precautions could result in loss of data
or in damage to the camera or card.

- Do not remove or insert memory cards

- Do not turn the camera off

- Do not remove the battery

- Do not disconnect AC adapters

•

Do not touch the card terminals with your fingers or metal objects.

•

Do not use excessive force when handling memory cards. Failure to
observe this precaution could damage the card.

•

Do not bend or drop memory cards or subject them to strong physical
shocks.

•

Do not expose memory cards to water, heat, or direct sunlight.

•

Do not format memory cards in a computer.

q

). The card

w

).

Inserting Memory Cards

10

Memory Card High-Temperature Warning

D

As indicated on the inside of the memory card
slot cover, memory cards inserted in the
camera may become hot. Do not attempt to
remove memory cards if a high-temperature
warning appears in the shooting display;
instead, wait for the camera to cool and the
warning to clear from the display.

No Memory Card Inserted

D

If no memory card is inserted, a “no memory card” indicator will appear in
the shooting display and [–E–] will appear in both the control panel and
the shooting display.

The Write Protect Switch

A

•

SD memory cards are equipped

with a write-protect switch. Sliding

the switch to the “lock” position

write-protects the card, protecting

the data it contains.

•

A “–––” indicator and a [Card] warning appear in the shooting display

when a write-protected card is inserted.

•

If you attempt to release the shutter while a write-protected card is

inserted, a warning will be displayed and no picture will be recorded.

Unlock the memory card before attempting to take or delete pictures.

Inserting Memory Cards

11

Attaching a Lens

•

The camera can be used with Z mount lenses. The lens
generally used in this manual for illustrative purposes is a
NIKKOR Z 24–70mm f/4 S.

•

Be careful to prevent dust entering the camera.

•

Confirm that the camera is off before attaching the lens.

q, w

- Remove the camera body cap (

- Align the mounting marks on the camera (t) and lens (y).
Do not touch the image sensor or lens contacts.

) and rear lens cap (e, r).

12

Attaching a Lens

- Rotate the lens as shown until it clicks into place (u).

•

Remove the front lens cap before taking pictures.

F Mount Lenses

D

•

Be sure to attach the FTZ mount adapter (available separately) before
using F mount lenses.

•

Attempting to attach F mount lenses directly to the camera could
damage the lens or image sensor.

Detaching Lenses

•

After turning the camera off, press and
hold the lens release button (
turning the lens in the direction shown
(w).

•

After removing the lens, replace the
lens caps and camera body cap.

q

) while

Attaching a Lens

13

Choose a Language and Set the Clock

The language option in the setup menu is automatically
highlighted the first time menus are displayed. Choose a
language and set the camera clock.

1

Turn the camera on.

2

Highlight [Language] in the
setup menu and press

The [Language] item is automatically
highlighted in the setup menu the
first time the G button is pressed
after purchase.

2

.

Choose a Language and Set the Clock

14

3

Select a language.

Press 1 or 3 to highlight the desired language and press J
(the languages available vary with the country or region in
which the camera was originally purchased).

4

Highlight [Time zone and date]
and press

5

Choose a time zone.

•

Select [Time zone] in the [Time
zone and date] display.

•

Highlight a time zone in the [Time
zone] display and press

•

The display shows a time zone map listing the selected
cities in the chosen zone and the difference between the
time in the chosen zone and UTC.

2

.

.

J

Choose a Language and Set the Clock

15

6

Turn daylight saving time on or
off.

•

Select [Daylight saving time] in
the [Time zone and date] display.

•

Highlight [On] (daylight saving time
on) or [Off] (daylight saving time off) and press

•

Selecting [On] advances the clock one hour; to undo the
effect, select [Off].

7

Set the clock.

•

Select [Date and time] in the [Time
zone and date] display.

•

Press J after using the multi
selector to set the clock to the date
and time in the selected time zone (note that the camera
uses a 24-hour clock).

8

Choose a date format.

•

Select [Date format] in the [Time
zone and date] display.

•

Highlight the desired date (year,
month, and day) display order and
press J.

.

J

Choose a Language and Set the Clock

16

9

Exit the menus.

Lightly press the shutter-release
button halfway to exit to shooting
mode.

The t Icon

D

A flashing t icon in the shooting display indicates that the camera clock
has been reset. The date and time recorded with new photographs will
not be correct; use the [Time zone and date] > [Date and time] option in
the setup menu to set the clock to the correct time and date. The camera
clock is powered by an independent clock battery. The clock battery
charges when the main battery is inserted in the camera. It takes about 2
days to charge. Once charged, it will power the clock for about a month.

SnapBridge

A

Use the SnapBridge app to synchronize the camera clock with the clock
on a smartphone or tablet (smart device). See SnapBridge online help for
details.

Choose a Language and Set the Clock

17

Basic Photography and Playback

Taking Photographs (b Mode)

Select b (auto) mode for simple “point-and-shoot”
photography.

Lenses with Retractable Barrels

D

Lenses with retractable barrels must be
extended before use. Rotate the lens zoom ring
as shown until the lens clicks into the extended
position.

1

Turn the camera on.

The monitor and control panel will
light.

18

Taking Photographs (

b

Mode)

2

Select photo mode by
rotating the photo/
movie selector to C.

3

Pressing the mode
dial lock release on
top of the camera,
rotate the mode dial
to b.

Taking Photographs (

b

Mode)

19

4

Ready the camera.

Holding the handgrip in your right hand and cradling the
camera body or lens with your left, bring your elbows in
against the sides of your chest.

•

Framing photos in the viewfinder:

20

Landscape (wide)

orientation

•

Framing photos in the monitor:

Landscape (wide)

orientation

Taking Photographs (

b

Mode)

Portrait (tall) orientation

Portrait (tall) orientation

5

Frame the photograph.

Position the main subject in the AF­area brackets.

•

If the camera detects a human face,
the AF-area brackets will be
replaced by a yellow border around
the subject’s face indicating the
focus point. If eyes are detected, the
yellow focus point will instead
appear over one or the other of the subject’s eyes.

Taking Photographs (

b

Mode)

21

6

Press the shutter-release
button halfway to focus.

•

The focus point will be displayed in
green when the camera focuses. If
the camera is unable to focus, the
AF-area brackets will flash.

•

The AF-assist illuminator may light
to assist the focus operation if the
subject is poorly lit.

•

You can also focus by pressing the AF-ON button.

•

If the camera detects the faces or
eyes of human portrait subjects, the
active focus point will be displayed
in green. The focus point will flash
red if the camera is unable to focus.

The AF-Assist Illuminator

D

Do not obstruct the AF-assist illuminator while it is lit.

22

Taking Photographs (

b

Mode)

7

Smoothly press the shutter­release button the rest of the
way down to take the
photograph.

•

You can also take a photograph by
touching the monitor. Touch your
subject to focus and lift your finger
to release the shutter.

The Memory Card Access Lamp

D

The memory card access lamp will light while
the photograph is being recorded. Do not

remove the memory card or battery.

The Standby Timer

D

The camera uses a standby timer to help
reduce the drain on the battery. If no
operations are performed for about
30 seconds, the standby timer will expire and
the monitor, viewfinder, and control panel will
turn off. A few seconds prior to turning off, the
monitor and viewfinder will dim. They can be
reactivated by pressing the shutter-release button halfway. The length of
time before the standby timer expires automatically can be selected using
Custom Setting c3 [Power off delay] > [Standby timer].

Taking Photographs (

b

Mode)

23

Shooting Movies (b Mode)

(auto) mode can also be used for simple, “point-and-shoot”

b

movie recording.

1

Turn the camera on.

The monitor and control panel will
light.

2

Select movie mode by
rotating the photo/
movie selector to 1.

Note that optional flash
units cannot be used
when the camera is in movie mode.

3

Pressing the mode
dial lock release on
top of the camera,
rotate the mode dial
to b.

24

Shooting Movies (

b

Mode)

4

Press the movie-record button
to start recording.

•

A recording indicator will be displayed in the monitor. The
monitor also shows the time remaining, or in other words
the approximate amount of new footage that can be
recorded to the memory card.

Recording indicator

1

1
2

•

The camera can be refocused during recording by pressing
the AF-ON button.

•

Sound is recorded via the built-in microphone. Do not
cover the microphone during recording.

•

If you tap your subject in the monitor during recording, the
focus point will track the subject as it moves through the
frame.

Time remaining

2

Shooting Movies (

b

Mode)

25

5

Press the movie-record button
again to end recording.

The Memory Card Access Lamp

D

The memory card access lamp will light while
the movie is being recorded. Do not remove the

memory card or battery.

The 0 Icon

D

A 0 icon indicates that movies cannot be recorded.

26

Shooting Movies (

b

Mode)

Recording Movies

D

•

Movie recording will end automatically if:

- The maximum length is reached

- Another mode is selected

- The photo/movie selector is rotated to

- The lens is removed

•

Sounds made by the camera may be audible in footage recorded:

-During autofocus

- During vibration reduction

- When power aperture is used

Memory Card High-Temperature Warning

D

During movie recording, memory cards may
become hot and a high-temperature warning
may appear in the shooting display. Do not
attempt to remove the memory card; instead,
wait for the camera to cool and the warning to
clear from the display.

C

Shooting Movies (

b

Mode)

27

Playback

Press the K button to view photos and movies recorded with
the camera.

Viewing Photos

Photos can be viewed by following the steps below.

1

Press the K button.

•

A picture will be displayed in the
monitor or viewfinder.

•

The memory card containing the
picture currently displayed is shown
by an icon.

2

Press 4 or 2 to view
additional pictures.

•

When pictures are displayed in the
monitor, you can view other
pictures by flicking a finger left or
right over the display.

•

To end playback and return to shooting mode, press the
shutter-release button halfway.

28

Playback

Viewing Movies

12

3

Movies are indicated by a 1 icon. Tap the a icon in the display
or press the
your approximate position in the movie).

1

1

Length

2

a

3

Current position/total length

4

Progress bar

5

Volume

6

Guide

7

button to start playback (a progress bar shows

J

icon

icon

4

675

Playback

29

Troubleshooting

Before Contacting Customer Support

You may be able to resolve any issues with the camera by
following the steps below. Check this list before consulting your
retailer or Nikon-authorized service representative.

Turn the camera off and remove the battery, then wait
about a minute, re-insert the battery and turn the camera

STEP

STEP

on.

1

The camera may continue to write data to the memory

D

card after shooting. Wait at least a minute before
removing the battery.

Search Nikon websites.

•

For support information and answers to frequently asked
questions, visit the website for your country or region

2

(0xvii).

•

To download the latest firmware for your camera, visit:
https://downloadcenter.nikonimglib.com/

STEP

30

Consult a Nikon-authorized service representative.

3

Before Contacting Customer Support

Technical Notes

Caring for the Camera

Storage

When the camera will not be used for an extended period,
remove the battery. Before removing the battery, confirm that
the camera is off.

Do not store the camera in locations that:

•

are poorly ventilated or subject to humidities of over 60%

•

are next to equipment that produces strong electromagnetic
fields, such as televisions or radios

•

are exposed to temperatures above 50 °C (122 °F) or below

−10 °C (14 °F)

Caring for the Camera

31

Caring for the Camera and Battery: Cautions

Camera Care

●

Do Not Drop

Do not drop the camera or lens or subject them to blows. The product
may malfunction if subjected to strong shocks or vibration.

●

Keep Dry

Keep the camera dry. Rusting of the internal mechanism caused by water
inside the camera can not only be expensive to repair but can in fact
cause irreparable damage.

●

Avoid Sudden Changes in Temperature

Sudden changes in temperature, such as those that occur when entering
or leaving a heated building on a cold day, can cause condensation inside
or outside the device. To prevent condensation, place the device in a
carrying case or plastic bag before exposing it to sudden changes in
temperature.

●

Keep Away from Strong Magnetic Fields

Static charges or the magnetic fields produced by equipment such as
radio transmitters could interfere with the monitor, corrupt data stored
on the memory card, or affect the product’s internal circuitry.

●

Do Not Leave the Lens Pointed at the Sun

Do not leave the lens pointed at the sun or other strong light source for
extended periods. Intense light may damage the image sensor or cause
fading or “burn in”. Photographs taken with the camera may exhibit a
white blur effect.

Caring for the Camera and Battery: Cautions

32

●

Lasers and Other Bright Light Sources

Do not direct lasers or other extremely bright light sources toward the
lens, as this could damage the camera’s image sensor.

●

Cleaning

When cleaning the camera body, use a blower to gently remove dust and
lint, then wipe gently with a soft, dry cloth. After using the camera at the
beach or seaside, wipe off any sand or salt using a cloth lightly dampened
in fresh water and then dry the camera thoroughly. In rare instances,
static electricity may cause the LCD displays to light up or go dark; this
does not indicate a malfunction. The display will soon return to normal.

●

Cleaning the Lens and Viewfinder

These glass elements are easily damaged: remove dust and lint with a
blower. If using an aerosol blower, keep the can vertical to prevent the
discharge of liquid that could damage glass elements. To remove
fingerprints and other stains from the lens, apply a small amount of lens
cleaner to a soft cloth and wipe the lens carefully.

●

Do Not Touch the Image Sensor

Under no circumstances should you exert
pressure on the image sensor, poke it with
cleaning tools, or subject it to powerful air
currents from a blower. These actions could
scratch or otherwise damage the sensor.

Caring for the Camera and Battery: Cautions

33

●

The Lens Contacts

Keep the lens contacts clean. Avoid touching them with your fingers.

●

Store in a Well-Ventilated Area

To prevent mold or mildew, store the camera in a dry, well-ventilated
area. Do not store the camera with naphtha or camphor moth balls, next
to equipment that produces strong electromagnetic, or where it will be
exposed to extremely high temperatures, for example near a heater or in
an enclosed vehicle on a hot day. Failure to observe these precautions
could result in product malfunction.

●

Long-Term Storage

To prevent damage caused by, for example, leaking battery fluid, remove
the battery if the product will not be used for an extended period. Store
the camera in a plastic bag containing a desiccant. Do not, however, store
the leather camera case in a plastic bag, as this may cause the material to
deteriorate. Store the battery in a cool, dry place. Note that desiccant
gradually loses its capacity to absorb moisture and should be replaced at
regular intervals. To prevent mold or mildew, take the camera out of
storage at least once a month, insert the battery, and release the shutter a
few times.

●

Turn the Product Off Before Removing or Disconnecting the Power
Source

Removing or disconnecting the power source while the camera is on
could damage the product. Particular care should be taken not to remove
or disconnect the power source while images are being recorded or
deleted.

Caring for the Camera and Battery: Cautions

34

●

Monitor/Viewfinder

•

The monitors (including viewfinder) are constructed with extremely
high precision; at least 99.99% of pixels are effective, with no more than

0.01% being missing or defective. Hence while these displays may
contain pixels that are always lit (white, red, blue, or green) or always off
(black), this is not a malfunction. Images recorded with the device are
unaffected. Your understanding is requested.

•

Images in the monitor may be difficult to see in a bright light.

•

Do not apply pressure to the monitor. The monitor could malfunction or
suffer damage. Dust or lint on the monitor can be removed with a
blower. Stains can be removed by wiping the monitor lightly with a soft
cloth or chamois leather. Should the monitor break, care should be
taken to avoid injury from broken glass. Be careful that liquid crystal
from the monitor does not touch the skin or enter the eyes or mouth.

•

Should you experience any of the following symptoms while framing
shots in the viewfinder, discontinue use until your condition improves:

- nausea, eye pain, eye fatigue,

- dizziness, headache, stiffness in your neck or shoulders,

- queasiness or loss of hand-eye coordination, or

- motion sickness.

•

The display may rapidly flicker on and off during burst photography.
Watching the flickering display could cause you to feel unwell.
Discontinue use until your condition improves.

●

Bright Lights and Back-Lit Subjects

Noise in the form of lines may in rare cases appear in pictures that include
bright lights or back-lit subjects.

Caring for the Camera and Battery: Cautions

35

Disposing of Data Storage Devices

D

Please note that deleting images or formatting memory cards or other
data storage devices does not completely erase the original image data.
Deleted files can sometimes be recovered from discarded storage devices
using commercially available software, potentially resulting in the
malicious use of personal image data. Ensuring the privacy of such data is
the user’s responsibility.
Before discarding a data storage device or transferring ownership to
another person, erase all data using commercial deletion software, or
format the device and then completely refill it with images containing no
private information (for example, pictures of empty sky). Care should be
taken to avoid injury when physically destroying data storage devices.
Before discarding the camera or transferring ownership to another
person, you should also use the [Reset all settings] item in the camera
setup menu to delete network settings and other personal information.

Caring for the Camera and Battery: Cautions

36

Battery Care

●

Precautions for Use

•

If improperly handled, batteries may rupture or leak, causing the
product to corrode. Observe the following precautions when handling
batteries:

- Turn the product off before replacing the battery.

- Batteries may be hot after extended use.

- Keep the battery terminals clean.

- Use only batteries approved for use in this equipment.

- Do not short or disassemble batteries or expose them to flame or
excessive heat.

- Replace the terminal cover when the battery is not inserted in the
camera or charger.

•

If the battery is hot, for example immediately after use, wait for it to cool
before charging. Attempting to charge the battery while its internal
temperature is elevated will impair battery performance, and the
battery may not charge or charge only partially.

•

If the battery will not be used for some time, insert it in the camera and
run it flat before removing it from the camera for storage. The battery
should be stored in a cool, dry location with an ambient temperature of
15 °C to 25 °C (59 °F to 77 °F). Avoid hot or extremely cold locations.

•

Batteries should be charged within six months of use. During long
periods of disuse, charge the battery and use the camera to run it flat
once every six months before returning it to a cool location for storage.

•

Remove the battery from the camera or charger when not in use. The
camera and charger draw minute amounts of charge even when off and
could draw the battery down to the point that it will no longer function.

Caring for the Camera and Battery: Cautions

37

•

Do not use the battery at ambient temperatures below 0 °C (32 °F) or
above 40 °C (104 °F). Failure to observe this precaution could damage
the battery or impair its performance. Charge the battery indoors at
ambient temperatures of 5 °C–35 °C (41 °F–95 °F). The battery will not
charge if its temperature is below 0 °C (32 °F) or above 60 °C (140 °F).

•

Capacity may be reduced and charging times increase at battery
temperatures from 0 °C (32 °F) to 15 °C (59 °F) and from 45 °C (113 °F) to
60 °C (140 °F).

•

Batteries in general exhibit a drop in capacity at low ambient
temperatures. Even fresh batteries charged at temperatures under
about 5 °C (41 °F) may show a temporary increase from “0” to “1” in the
setup menu [Battery info] age display, but the display will return to
normal once the battery has been recharged at a temperature of about
20 °C (68 °F) or higher.

•

Battery capacity drops at low temperatures. The change in capacity with
temperature is reflected in the camera battery-level display. As a result,
the battery display may show a drop in capacity as the temperature
drops, even if the battery is fully charged.

•

Batteries may be hot after use. Observe due caution when removing
batteries from the camera.

●

Charge Batteries Before Use

Charge the battery before use. The supplied battery is not fully charged at
shipment.

●

Ready Spare Batteries

Before taking photographs, ready a spare battery and keep it fully
charged. Depending on your location, it may be difficult to purchase
replacement batteries on short notice.

Caring for the Camera and Battery: Cautions

38

●

Have Fully-Charged Spare Batteries Ready on Cold Days

Partially-charged batteries may not function on cold days. In cold
weather, charge one battery before use and keep another in a warm
place, ready to be exchanged as necessary. Once warmed, a cold battery
may recover some of its charge.

●

Battery Level

•

Turning the camera on or off repeatedly when the battery is fully
discharged will shorten battery life. Batteries that have been fully
discharged must be charged before use.

•

A marked drop in the time a fully charged battery retains its charge
when used at room temperature indicates that it requires replacement.
Purchase a new rechargeable battery.

●

Do Not Attempt to Charge Fully-Charged Batteries

Continuing to charge the battery after it is fully charged can impair
battery performance.

●

Recycling Used Batteries

Recycle rechargeable batteries in accord with local regulations, being
sure to first insulate the terminals with tape.

Caring for the Camera and Battery: Cautions

39

Using the Charger

•

Do not move the charger or touch the battery during charging; failure
to observe this precaution could in very rare instances result in the
charger showing that charging is complete when the battery is only
partially charged. Remove and reinsert the battery to begin charging
again.

•

Do not short the charger terminals. Failure to observe this precaution
could result in overheating and damage to the charger.

•

Unplug the charger when it is not in use.

•

Use the MH-25a with compatible batteries only.

•

Do not use chargers with damage that leaves the interior exposed or
that produce unusual sounds when used.

•

The symbols on this product represent the following:

AC, p DC, q Class II equipment (the construction of the product is

m

double-insulated)

Using the Charging AC Adapter

•

Do not move the camera or touch the battery during charging. Failure
to observe this precaution could in very rare instances result in the
camera showing that charging is complete when the battery is only
partially charged. Disconnect and reconnect the adapter to begin
charging again.

•

Do not short the adapter terminals. Failure to observe this precaution
could result in overheating and damage to the charger.

•

Unplug the adapter when it is not in use.

•

Do not use adapters with damage that leaves the interior exposed or
that produce unusual sounds when used.

•

The symbols on this product represent the following:

AC, p DC, q Class II equipment (the construction of the product is

m

double-insulated)

Caring for the Camera and Battery: Cautions

40

Trademarks and Licenses

•

CFexpress is a trademark of the CompactFlash Association in
the United States and other countries.

•

NVM Express is a trademark of NVM Express Inc. in the United
States and other countries.

•

XQD is a trademark of Sony Corporation.

•

The SD, SDHC, and SDXC logos are trademarks of SD-3C, LLC.

•

Windows is either a registered trademark or a trademark of
Microsoft Corporation in the United States and/or other
countries.

•

Apple®, App Store®, the Apple logos, iPhone®, iPad®, Mac, and
macOS are trademarks of Apple Inc. registered in the U.S. and/
or other countries.

•

Android, Google Play and the Google Play logo are trademarks
of Google LLC. The Android robot is reproduced or modified
from work created and shared by Google and used according
to terms described in the Creative Commons 3.0 Attribution
License.

•

IOS is a trademark or registered trademark of Cisco Systems,
Inc., in the United States and/or other countries and is used
under license.

•

HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing, LLC.

Trademarks and Licenses

41

•

The Bluetooth® word mark and logo are registered trademarks
owned by Bluetooth SIG, Inc., and any use of such marks by
Nikon is under license.

•

Wi-Fi and the Wi-Fi logo are trademarks or registered
trademarks of the Wi-Fi Alliance.

•

All other trade names mentioned in this manual or the other
documentation provided with your Nikon product are
trademarks or registered trademarks of their respective
holders.

Use of the Made for Apple badge means that an accessory has been
designed to connect specifically to the Apple products identified in the
badge, and has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the operation of this
device or its compliance with safety and regulatory standards. Please
note that the use of this accessory with an Apple product may affect
wireless performance.

FreeType License (FreeType2)

D

Portions of this software are copyright © 2012 The FreeType Project
(https://www.freetype.org

MIT License (HarfBuzz)

D

Portions of this software are copyright © 2018 The HarfBuzz Project
(https://www.freedesktop.org/wiki/Software/HarfBuzz
reserved.

). All rights reserved.

). All rights

Trademarks and Licenses

42

Unicode® Character Database License (Unicode® Character

D

Database)

The software for this product uses the Unicode® Character Database
License open-source software. The terms of the software license are as
follows:
COPYRIGHT AND PERMISSION NOTICE
Copyright © 1991-2020 Unicode, Inc. All rights reserved.
Distributed under the Terms of Use in
https://www.unicode.org/copyright.html.
Permission is hereby granted, free of charge, to any person obtaining a
copy of the Unicode data files and any associated documentation (the
"Data Files") or Unicode software and any associated documentation (the
"Software") to deal in the Data Files or Software without restriction,
including without limitation the rights to use, copy, modify, merge,
publish, distribute, and/or sell copies of the Data Files or Software, and to
permit persons to whom the Data Files or Software are furnished to do so,
provided that either
(i) this copyright and permission notice appear with all copies of the

Data Files or Software, or

(ii) this copyright and permission notice appear in associated

Documentation.

Trademarks and Licenses

43

THE DATA FILES AND SOFTWARE ARE PROVIDED "AS IS", WITHOUT
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY
RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS
INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL
INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE
OR PERFORMANCE OF THE DATA FILES OR SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall
not be used in advertising or otherwise to promote the sale, use or other
dealings in these Data Files or Software without prior written
authorization of the copyright holder.

AVC Patent Portfolio License

D

THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FO R THE

PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN
COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC
VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-
COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO
PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER
USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE

https://www.mpegla.com

BSD License (NVM Express Driver)

D

The license for the open-source software included in the camera’s NVM
Express driver is as follows:
https://imaging.nikon.com/support/pdf/LicenseNVMe.pdf

Trademarks and Licenses

44

Notices

The Battery Charger

IMPORTANT SAFETY INSTRUCTIONS—SAVE THESE
INSTRUCTIONS
DANGER—TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS

For connection to a supply not in the U.S.A., use an attachment plug adapter
of the proper configuration for the power outlet if needed. This power unit
is intended to be correctly oriented in a vertical or floor mount position.

●

Notices for Customers in the U.S.A.

Federal Communications Commission (FCC) Radio Frequency
Interference Statement

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.

•

Consult the dealer or an experienced radio/television technician for
help.

Notices

45

CAUTIONS

Modifications

The FCC requires the user to be
notified that any changes or
modifications made to this device that are not expressly approved by
Nikon Corporation may void the user’s authority to operate the
equipment.

Interface Cables

Use the interface cables sold or provided by Nikon for your equipment.
Using other interface cables may exceed the limits of Class B Part 15 of the
FCC rules.

Nikon Inc., 1300 Walt Whitman Road, Melville, New York 11747-3064,
U.S.A.

Tel.: [phone]

●

Power Cable

At voltages over AC 125 V (U.S.A. only): The power cable must be rated

for the voltage in use, be at least AWG no. 18 gauge, and have SVG
insulation or better with a NEMA 6P-15 plug rated for AC 250 V 15 A.

●

Notice for Customers in Canada

CAN ICES-3 B / NMB-3 B

Z 7II/Z 6II

46

Notices

●

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

Notices for Customers in Europe

This symbol indicates that electrical and electronic equipment
is to be collected separately.
The following apply only to users in European countries:

•

This product is designated for separate collection at an
appropriate collection point. Do not dispose of as household
waste.

•

Separate collection and recycling helps conserve natural resources and
prevent negative consequences for human health and the environment
that might result from incorrect disposal.

•

For more information, contact the retailer or the local authorities in

charge of waste management.
This symbol on the battery indicates that the battery is to be
collected separately.
The following apply only to users in European countries:

•

All batteries, whether marked with this symbol or not, are

designated for separate collection at an appropriate collection point. Do

not dispose of as household waste.

•

For more information, contact the retailer or the local authorities in

charge of waste management.

Notices

47

Bluetooth and Wi-Fi (Wireless LAN)

This product is controlled by the United States Export
Administration Regulations (EAR). The permission of the United
States government is not required for export to countries other
than the following, which as of this writing are subject to
embargo or special controls: Cuba, Iran, North Korea, Sudan,
and Syria (list subject to change).
The use of wireless devices may be prohibited in some countries
or regions. Contact a Nikon-authorized service representative
before using the wireless features of this product outside the
country of purchase.

The Bluetooth transmitter in this device operates in the 2.4 GHz
band.

●

Notice for Customers in the U.S.A. and Canada

This device complies with part 15 of FCC Rules and Innovation, Science
and Economic Development Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

FCC WARNING

The FCC requires the user to be notified that any changes or
modifications made to this device that are not expressly approved by
Nikon Corporation may void the user’s authority to operate the
equipment.

Bluetooth and Wi-Fi (Wireless LAN)

48

Compliance with FCC requirement 15.407(c)

Data transmission is always initiated by software, which is the passed
down through the MAC, through the digital and analog baseband, and
finally to the RF chip. Several special packets are initiated by the MAC.
These are the only ways the digital baseband portion will turn on the RF
transmitter, which it then turns off at the end of the packet. Therefore, the
transmitter will be on only while one of the aforementioned packets is
being transmitted. In other words, this device automatically discontinue
transmission in case of either absence of information to transmit or
operational failure.

Frequency Tolerance: ±20 ppm

FCC Radio Frequency Interference Statement

Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Co-location

This transmitter must not be co-located or operated in conjunction with
any other antenna or transmitter.

Nikon Inc., 1300 Walt Whitman Road, Melville, New York 11747-3064,
U.S.A.
Tel.: [phone]

Bluetooth and Wi-Fi (Wireless LAN)

49

FCC/ISED RF Exposure Statement

The available scientific evidence does not show that any health problems
are associated with using low power wireless devices. There is no proof,
however, that these low power wireless devices are absolutely safe. Low
power Wireless devices emit low levels of radio frequency energy (RF) in
the microwave range while being used. Whereas high levels of RF can
produce health effects (by heating tissue), exposure of low-level RF that
does not produce heating effects causes no known adverse health effects.
Many studies of low-level RF exposures have not found any biological
effects. Some studies have suggested that some biological effects might
occur, but such findings have not been confirmed by additional research.
This product has been tested and found to comply with FCC/ISED
radiation exposure limits set forth for an uncontrolled environment and
meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of
the ISED radio frequency (RF) Exposure rules. Please refer to the SAR test
report that was uploaded to FCC website.

Compliance with RSS-247 Issue 2 §6.4

Data transmission is always initiated by software, which is the passed
down through the MAC, through the digital and analog baseband, and
finally to the RF chip. Several special packets are initiated by the MAC.
These are the only ways the digital baseband portion will turn on the RF
transmitter, which it then turns off at the end of the packet. Therefore, the
transmitter will be on only while one of the aforementioned packets is
being transmitted. In other words, this device automatically discontinue
transmission in case of either absence of information to transmit or
operational failure.

●

Notice for Customers in Canada

For indoor use only (5150-5350MHz).

Bluetooth and Wi-Fi (Wireless LAN)

50

●

Notice for Customers in Europe and in Countries Complying with
the Radio Equipment Directive

Hereby, Nikon Corporation declares that the radio equipment
types Z 7II and Z 6II are in compliance with Directive 2014/53/
EU.

The full texts of the EU declarations of conformity are available at the
following internet addresses:

Z7II:
https://imaging.nikon.com/support/pdf/DoC_N1932.pdf
Z6II:
https://imaging.nikon.com/support/pdf/DoC_N1929.pdf

Wi-Fi

•

Operating frequency:

- 2412–2462 MHz (channel 11; Africa, Asia, Bolivia, and Oceania)

- 2412–2462 MHz (channel 11) and 5180–5825 MHz (U.S.A., Canada,
Mexico)

- 2412–2462 MHz (channel 11) and 5180–5805 MHz (other countries in
the Americas)

- 2412–2462 MHz (channel 11) and 5745–5805 MHz (Georgia)

- 2412–2462 MHz (channel 11) and 5180–5320 MHz (other European
countries)

•

Maximum output power (EIRP):

- 2.4 GHz band: 5.2 dBm

- 5 GHz band: 5.3 dBm (Georgia)

- 5 GHz band: 8.3 dBm (other countries)

Bluetooth

•

Operating frequency:

- Bluetooth: 2402–2480 MHz

- Bluetooth Low Energy: 2402–2480 MHz

•

Maximum output power (EIRP):

- Bluetooth: –0.3 dBm

- Bluetooth Low Energy: –1.8 dBm

Bluetooth and Wi-Fi (Wireless LAN)

51

●

Notice for Customers in Singapore

Trade Name:
Model: Z 7II

Trade Name:
Model: Z 6II

This device complies with radio-frequency regulations. The content of
certification labels not affixed to the device is given below.

Complies with
IMDA Standards
DA103423

●

Security

Although one of the benefits of this product is that it allows others to
freely connect for the wireless exchange of data anywhere within its
range, the following may occur if security is not enabled:

•

Data theft: Malicious third-parties may intercept wireless transmissions
to steal user IDs, passwords, and other personal information.

•

Unauthorized access: Unauthorized users may gain access to the
network and alter data or perform other malicious actions. Note that
due to the design of wireless networks, specialized attacks may allow
unauthorized access even when security is enabled.

•

Unsecured networks: Connecting to open networks may result in
unauthorized access. Use secure networks only.

Conformity Marking

A

The standards with which the camera complies can be viewed using the
[Conformity marking] option in the setup menu.

Bluetooth and Wi-Fi (Wireless LAN)

52

Certificates

A

Bluetooth and Wi-Fi (Wireless LAN)

53

54

Warranty Terms - Nikon Europe Service Warranty

Dear Nikon Customer,
We thank you for your purchasing this Nikon product. Should
your Nikon product require warranty service, please contact the
dealer from whom it was purchased or a member of our
authorized service network within the sales territory of Nikon
Europe B.V. (e.g. Europe/Russia/others). See details under:

https://www.europe-nikon.com/support

In order to avoid any unnecessary inconvenience, we advise you
to read the user manuals carefully before contacting the dealer
or our authorized service network.

Your Nikon equipment is guaranteed against any manufacturing
defects for one full year from the date of original purchase. If
during this period of guarantee the product proves defective
due to improper material or workmanship, our authorized
service network within the sales territory of Nikon Europe B.V.
will, without charge for labor and parts, repair the product in the
terms and conditions set as below. Nikon reserves the right (at its
sole discretion) to replace or repair the product.

1. This warranty is only provided upon presentation of the
completed warranty card and original invoice or purchase
receipt indicating the date of purchase, product type and
dealer’s name, together with the product. Nikon reserves the
right to refuse free-of-charge warranty service if the above
documents cannot be presented or if the information
contained in it is incomplete or illegible.

Warranty Terms - Nikon Europe Service Warranty

55

2. This warranty will not cover:

• necessary maintenance and repair or replacement of parts

due to normal wear and tear.

• modifications to upgrade the product from its normal

purpose as described in user manuals, without the prior
written consent of Nikon.

• transport costs and all risks of transport relating directly or

indirectly to the warranty of the products.

• any damage resulting from modifications or adjustments

which may be made to the product, without the prior
written consent of Nikon, in order to comply with local or
national technical standards in force in any other country
than the ones for which the product was originally designed
and/or manufactured.

3. The warranty will not be applicable in the case of:

• damage caused by misuse including but not limited to

failure to use the product for its normal purpose or
according to the user instructions on the proper use and
maintenance, and to installation or use of the product
inconsistent with the safety standards in force in the
country where it is used.

• damage caused by accidents including but not limited to

lightning, water, fire, misuse or neglect.

• defacing, illegibility or removal of the model or serial

number on the product.

• damage resulting from repairs or adjustments which have

been conducted by unauthorized service organizations or
persons.

• defects in any system into which the product is

incorporated or with which it is used.

Warranty Terms - Nikon Europe Service Warranty

56

4. This service warranty does not affect the consumer’s statutory
rights under applicable national laws in force, nor the
consumer’s right against the dealer arising from their sales/
purchase contract.

Notice: An overview of all authorized Nikon Service Stations can
be found online by following this Link
(URL = https://www.europe-nikon.com/service/).

Warranty Terms - Nikon Europe Service Warranty

57

No reproduction in any form of this manual, in whole or in part (except
for brief quotation in critical articles or reviews), may be made without
written authorization from NIKON CORPORATION.

6MOA7711-01