Page 1
TOOL INSTRUCTION
SERVICE DEPT
1. Name ------------------------ Viewfinder mounting rail adjustment tool
2.
Purpose -------------------”
3.
How to
adjust ----- Unfasten two screws on the rail of film advance side.
To
adjust the space between viewfinder mounting rails of
Then insert the tool between the rails as shown below .
(The shorter side of the tool is the standard space between the rails.)
Push firmly the rail of film advance side toward the rewind side, and
secure it with screws .
F4.
Insert the tool in this
direction.
0
0
Standard space between rails
Page 2
TOOL INSTRUCTION
SERVICE DEPT
1. NAME: Z LENS HOLDER J15280
\
J1.52f3’
,.
():”]
2. PURPOSE: To adjust “Z” in AP
3. HOW TO ASSEMBLE:
P
1) Mounting Standard Lens
Remove the meter coupling shoe attached on the aperture
a)
ring of J18183.
Remove adhesive agent from the circumference of the
b)
aperture index ring (silver ring) of J18183.
(Do not remove adhesive from the sides of the ring.)
Unfasten three screws on the tube of J15280 with a
c)
hexagonal wrench, so that they do not protrude from the
inner surface of the tube.
Set J18183 on J15280 as shown below and fasten screws.
d)
t
1
SLR camera
for Z Adjustment
(J18183)
\
L
\
4
e) Apply Screw Lock on the screws.
. .
1
0“
J-&
Set the index
on the lens
here (at 90°)
to align the
screw holes.
Page 3
TOOL INSTRUCTION
\
\
SIII?VICE
2) Mounting lens holder on AF adjustment stand (J15259)
a)b)Remove rubber and plate as shown below:
DEPT
Screw
te
-.
1
J 1
L—..— . . . . ._
.-
52E30
..-
!
J
Mount J15280 to J15259 with a tripod screw and attached
two screws.
of the lens (J18183) becomes horizontal.
Adjust each screw so that the optical axis
#
Q
Tripod screw
\
Screw
—-
r’
>
2
Page 4
TOOL INSTRUCTION
4. HOW TO USE
a)
Attach a camera to the assembly of J15280, J15259 and J18183.
(Align the index of the lens holder with the center line of
the camera as shown in the figure below.
camera to the lens and turn
SERVICE
DIZPT
i.
-.
.~ .!.. ?.~
Then,
it in the arrow direction.)
Index
8
“:6-”””]
attach the
f-
b)
Decide the distance between the film plane
~
in
(Set the distance
c)
Look into the viewfinder and set the focus
center of the chart.
J15259.
screw.
d)
Set J15259 securely.
Adjust
e)
illuminator box (J15264).
at the specified one for
Adjust the vertical position by moving
Fine adjustment can be made by unfastening each
“z” Of the camera.
3
and the chart
each lens.)
brackets at the
Loading...