Nikon 2143EB Installation Manual

Installation Manual

This module is to be installed only by the professionals and used only with a Digital Camera
produced by Nikon Corporation. When this module is installed in the Digital Camera, we shall
consider the following points;

1. Since “2143EB

the outside of the product if the FCC ID/IC Number is not visible. The exterior label shall
use wording such as either ”Contains Transmitter Module FCC ID: CGJ2143EB / IC
Number: 4634A-2143EB” or “Contains FCC ID: CGJ2143EB / IC: 4634A-2143EB”.

2. “2143EB” complies with requirements of sub-sections 15.19(a)(3) in FCC Rules Part 15

Subpart C. The manual statement (15.19 (a)(3) is included User Guide of the product.

3. “2143EB
(Fig1, 2, and 3)

Fig1. Front side of “2143EB

” owns its FCC ID Number/IC Number, we shall affix an exterior label on

” is to be installed only by the professional line operator as shown in following pictures.

”

Fig2. Top view of “2143EB” be equipped for a digital camera (example)

Antenna

Connector Cable
between Antenna and
Module

Module

Fig3. Side view of “2143EB” be equipped for a digital camera (example)