Nike LANCE CHRONO instructions

LANCE CHRONO
Start Chronograph
Reset Stopped Chronograph
Pull Crown to second click to set time
Pull Crown to first click to set date
Crown
Chronograph MINUTES dial (0-60)
NOTE: The 1/20 SECOND dial will stop after 30 seconds to save battery life.
Chronograph SECONDS hand (0-60)
Chronograph HOURS dial (0-12)
Chronograph 1/20 SECOND dial (3 revolutions per second)
H20 RESIST
100m
OPERATING TEMPERATURE
-5 to 50˚ Celsius
Material Specifications
CRYSTAL
Mineral Glass
LINKS
Titanium
STRAP
Polyurethane
CASE
Aluminum
CASEBACK
Stainless Steel
BUTTONS
Stainless Steel
BUCKLE
Stainless Steel
Mode Limits
CHRONOGRAPH
11:59'59"
Battery
SR927W
Battery Replacement
Do not open watch back. Battery replacement must be performed
by a certified Nike service center to retain a valid warranty. In addition to battery replacement, the service center will test movement, gaskets, water resistance and hardware, to further ensure the long-term care of your watch.
If the SECONDS and 1/20 SECOND hands do not return to "0" position after resetting the chronograph, pull Crown to second click for calibration
Press until SECOND hand reads zero
Press until 1/20 SECOND hand reads zero
Once hands have been zeroed, reset time and return crown to normal position
Loading...