EXO
User Handbook
5880 Series
nightingalechairs.com
Congratulations,
this EXO™ is yours.
Please read and understand this user handbook
before operating this office chair.
F
G
C
E
A
5880-WH
D
5880
B
Using & Adjusting Your EXO™
UP
A
Pneumatic Height Adjustment
To lower, lift the lever while
seated. To raise, lift lever with
your weight off the seat.
D
Horizontal Arm Adjustment
Loosen fasteners that secure arms to seat,
pull arm out to desired width and
re-tighten arms.
UP
DOWN
G
Synchronous Tilt Lock
To lock chair in upright position pull lever up
and release. To lock chair in recline position
push lever down to lowest setting and
release. To unlock and allow free oat, pull
lever up to middle setting and release, chair
will unlock when you lean back.
TURN
B
Tension Knob
Turn knob clockwise to increase tension,
turn counter-clockwise to decrease tension.
PUSH
E
Pivot Arm Pad Adjustment
(Underneath pad). Push button up to
pivot, turn pad to desired position.
Release button to lock into position.
UP
C
Arm Height Adjustment
Pull lever up to raise or
lower arm, release to lock.
UP
DOWN
F
Lumbar Height Adjustments
Use both hands, while seated to adjust
lumbar support pad height to desired
position. To adjust lumbar support
pad height, pull pad up or push pad down
with both hands to ensure even adjustment.
Care Instructions
With regular care and maintenance, your EXO™
will provide many years of superior performance
and satisfaction. To maintain the quality of your
Nightingale product, please follow the cleaning
instructions outlined here.
Mechanism
Once a year lubricate using WD40 or similar product. (Spray with plastic
straw attached to sprayer) NOTE: To prevent dripping, avoid over
lubrication which may cause damage to surrounding surfaces.
NEBULA™ Mesh
Clean with mild detergent and water applied with a clean damp cloth or sponge.
Rinse with a damp (water) cloth and let dry. Never use hot water and avoid
scrubbing. Use gentle movements.
Plastic Parts
To clean, spray with a mild detergent and wipe off using a damp (water) cloth.
Do not use abrasives or excessive amounts of cleaner.
Frame
Powder coat frames can be cleaned by wiping with a damp cloth and any
mild detergent.
*The instruction for the care and maintenance of Nightingale Products are provided to you as a sevice. No
warranty is implied since results may vary.
for more information, please visit
www.nightingalechairs.com
Nightingale Corp.
T 1.800.363.8954
F 1.800.637.6784
www.nightingalechairs.com
info@nightingalechairs.com
2
RECYCLABLE
Loading...