Night & Day Winchester Assembly Instruction
Assembly
Instructions
One pair of Bifold Arms.
1
i
BIFOLD FUTON FRAME
FUTON ARMS
See below for
Preparation of arms
for assembly.
Winchester-0301
Hardware in this box.
2
80mm Bolts x 4 Pieces
For the Front Leg
60mm Bolts x 4 Pieces
For the Back Leg
50mm Bolts x 4 Pieces
For the Wood Brackets
16mm Bolts x 4 Pieces
For the Stretcher Brackets
Fasten Stretcher Brackets to Arm.
3
Barrel Nuts x 8 Pieces
Wooden Dowel x 4 Pieces
Allen Key x 1 Piece
Wood Brackets
Stretcher Bracket
x 4 Pieces
One Pair of
4
5
Inside ViewOutside View
Assemble the Wood Bifold Body.
BODY INSTRUCTIONS: Instructions for assembly of
arms to the Wood Bifold Body are in the BODY box.
Use the longer 80mm Bolts to attach the Front
Stretcher, the 60mm Bolts on the Back Stretcher.
NOTE: Fitting
Wooden Dowels
Stretcher Rail
from BODY box
Dowel from
ARM box
Tap dowel all the way into this
hole before assembly to arm.
Fit Wood Brackets to the Arms.
Only after the Arms and Body have been completely
assembled, fix the Wood Brackets to the Arms.
Dowel Hole
Hole for bolt
Hole for cleat
Leg
A.C.Insert the Stretcher Bracket Cleat
into the hole provided.
B. IMPORTANT: Don't fully tighten Bracket until
Stretchers are all in place for easy alignment.
Each arm requires two brackets, front and back.
Instructions for Bifold Body assembly, are packed in the Body box.
i
16mm Bolt
Cleat
Allen Key
Stretcher
Bracket
Lift the Seat Deck to access the Bolt holes.
Before you attach the Wood
Brackets, make sure all other
Bolts are firmly tightened.
Wood
Bracket
Front Leg
50mm
Bolts
Wood
Button
50mm Botls
Page 1 of 1
Loading...