Night & Day Springwood Body Assembly Assembly Instruction

Assembly

i

Instructions

BIFOLD FUTON FRAME

LOUNGER

Instructions apply to all sizes:

Twin Love seat

N&D-1001

Assembled View.

1A

Back Deck

Arm (Box 1 of 2)

Parts in this box.

1B

Your arm style may vary

Seat Deck

Ottoman Deck

Small Leg

Seat Deck

Ottoman Deck (with Legs)

Hardware in this box.

1C

Clevis Pins

x 2 Pieces

Back Deck

Rear Stretcher

Front Stretcher (with Metal Strike Plates)

Locking Pins
x 2 Pieces

Instructions for the Arm assembly, are packed in the Arm box.

Page 1 of 3

Assembly Instructions

Prepare Arms for Assembly.2A

LOUNGER BIFOLD FRAME

NOTE:

Some Arms may not have these features, so just skip these steps.

The hardware for these steps is included with the Arms.

See below for Assembly

of the Lounger Frame.

N&D-1001

Fasten Stretcher Brackets to Arm.

A.C.Insert the Stretcher

Bracket Cleat into
the hole provided.

B. IMPORTANT: Don't

fully tighten Bracket
until Stretchers are
all in place for easy
alignment.

Each arm requires

Dowel Hole

Hole for bolt

Hole for cleat

Leg

16mm Bolt

two brackets, front
and back.

Attach Arms to Stretchers.

2B

Cleat

Stretcher
Bracket

Using Bolts and Barrel Nuts provided with the Arms,
attach the Arms LOOSELY to the Stretchers as shown..

It is important that these bolts are left loose!

no

(

stretcher

Rear

Bolts

Barrel Nuts

Front

The

Allen Key

plates

Stretcher

)

Stretcher
Bracket

metal

has

plates

Fit Wooden Dowels.

Middle
hole

Stretcher

Wooden Dowel

Tap dowels all the way into the middle
hole, at each end of the Stretchers

Your arm style may vary.

upwards.

face

should

which

Bolts

Allen Key ­Leave bolts LOOSE!

Bolts

BOLT AND BARREL NUT
ASSEMBLY SYSTEM

Insert Barrel Nuts as shown
using a screwdriver. This will
help you position the Nut in
line with the Bolt.

Do not force the Bolt
as you may strip the
thread. Be sure the
thread is properly started.

Allen Key

Wooden Dowel
(See above)

Bolt

Bolt

THIS END

FRONT

Do not tighten
the Bolts at
this stage!

Be sure the holes are
free of wood chips
and saw dust.

Barrel Nut

Screwdriver

Page 2 of 3