Night & Day Seagull Daybed Back Panel Assembly Instruction

Assembled View.

1

D A Y B E D D R A W E R S

Daybed Collection

Parts in this box.

2

Hardware in this box.

3

ASSEMBLY

INSTRUCTIONS

0108

Fit Side Panels and Support onto Drawer Face.

4

Side
Support

Side
Panel

Dowels

Bracket

Side
Support

Center
Support

Side
Panel

Drawer Front x 2

Drawer Bottom x 2

Side Support x 4 Center Support x 2

Side Panel x 4

Back Panel x 2

Lay the Drawer Front on a smooth, flat
surface so the holes are facing upwards.

Fit the Side Panels to the Drawer Front,
fitting the dowels in the holes. Use two
16mm Bolts to attach the Side Panel in
place, but don't fully tighten these yet.

them a bit loose, to make fitting

Leave
the Back Panel easier.

60mm Bolts

40mm Threaded

Wood Bolts x 8

Side Panel

16mm Bolts

Bracket

Nuts are already
provided in the
Drawer Front.

x 8

16mm Bolts

x 8

Barrel Nuts

x 8

Allen Key x 1

Drawer
Front

Drawer Front

Fit the Support into dowel holes
provided on the Drawer Front.

Remember, Leave these Bolts LOOSE!

Page 1 of 2

Fit in the Plywood Panel.

5

Guide the Plywood Panel in carefully so that
it won't jump out of
its grooves.

D A Y B E D D R A W E R S

Daybed Collection

Fit the Back Panel.

6

Gently spread the Side Panels apart a bit

Side Panel

Dowels

to fit the dowels. Afterwards, tighten the
bolts on the Brackets.

Bolt the Side Supports.

7

Bolt the Side Supports with 40mm
Threaded Wood Bolts.

ASSEMBLY

INSTRUCTIONS

0108

Plywood Panel

Side Panel

Drawer Front

Bolt Back Panel in Place.

8

Carefully turn the assembled Drawer down. using the
60mm Bolts and Barrel Nuts, secure the Back Panel
in place.

Back Panel

60mm
Bolts

Barrel
Nut

Bracket

Barrel
Nuts

Holes

Side
Panel

60mm Bolt

Back Panel

Side
Panel

40mm
Threaded
Wood Bolts

60mm Bolt

Allen Key

Barrel
Nuts

Drawer Front

Screwdriver

Page 2 of 2