Night & Day Rattan Body Assembly Assembly Instruction

Assembly Instructions BronzeS H O E F I T T I N G S

Parts packed in this box.

Chair • Love seat • Full • Queen

Parts in this box.

1A

NOTE: Full (Double) size is shown here. Other sizes differ in overall size of components.

Back Deck Top Roller
(Code B1)

TM

Back Deck Bottom Roller
(Code B3)

TM

SF 0303

Snapper Snapper

Back Deck

Seat Deck

Stretchers x 2

Seat Deck Pin
(Code A3)

featuring the Rubber

Note: Shoe Fittings™ including the Snapper™are

Patent Pending: US#60/201,672 and US#09/760,749.

TM

Page 1 of 5

Assembly Instructions BronzeS H O E F I T T I N G S

Attach Stretchers to Arms

Chair • Love seat • Full • Queen

Fit Bolts Loosely to Arms.

2A

Hook Stretchers onto Arms.

2B

TM

SF 0303

Insert the 20mm Bolts (from the Arm Box)
into the bottom two holes on the Arms. Screw in
about five turns only.

Your arm style may vary from that shown here.

Inside of Arm

20mm Bolt
20mm Bolt

Note: Leave the top hole empty!

Carefully hook the Stretchers on to the Bolts on the Arms. Note that the front stretcher has
Metal Plates which should be assembled upwards.

Do not tighten the Bolts yet - the Arms need to
be loose to allow the Seat and Back Decks
to be assembled.

Rear Stretcher

(no metal plates)

20mm Bolt
20mm Bolt

The Bolts should be left
sticking out like this.

Page 2 of 5

The Front Stretcher has metal

plates which should face upwards.