Night & Day Rattan Body, Rattan Floral Collection Lounger Assembly Instruction
Assembly
Instructions
BIFOLD FUTON FRAME
RATTAN LOUNGER
Instructions apply to all sizes:
Twin Love seat
N&D-0505
Assembled View.
1A
Parts in this box.
1B
Back Deck
Arm (Box 1 of 2)
Hardware in this box.
1C
Clevis Pins
x 2 Pieces
Your arm style may vary
Seat Deck
Ottoman Deck
Small Leg
Locking Pins
x 2 Pieces
Back Deck
Seat Deck
Ottoman Deck (with Legs)
Rear Stretcher
1D
Fit Bolts loosely to Arms.
Insert the 20mm Bolts into the bottom two holes
on the Arms. Screw in about five turns only.
Inside of Arm
Leave the
top hole
empty!
20mm
Bolts
Leave the top
hole empty!
The Bolts
should be left
sticking out
like this!
Leave the
top hole
empty!
20mm
Bolts
Front Stretcher (with Metal Strike Plates)
Page 1 of 3
Assembly Instructions
2A
Fit Bolts loosely to Arms.
RATTAN LOUNGER FUTON FRAME
Carefully hook the stretchers on to the Bolts on the Arms.
Note that the front stretcher has Metal plates which
should be assembled upwards.
Do not tighten the Bolts yet - the Arms need to
be loose to allow the Seat and Back Decks
to be assembled.
Rear Stretcher
(no metal plates)
The Front Stretcher
has metal plates which
should face upwards.
See below for Assembly
of the Lounger Frame.
N&D-0505
Your arm style may vary.
2B
Join the Back and Seat Deck together.
Lay both decks on a smooth flat surface, with the slats
A.
facing upwards. Use the Clevis Pins to join the decks
together. Secure each with a Washer and Locking Pin.
Back Deck
Clevis Pin
The Seat Deck has a
sticker to indicate the top
Clevis Pin
Clevis Pin
Locking Pin
Page 2 of 3
Loading...