S P I C E S
B E D S A N D C A S E S
Parts in this Box:
1A
Slats are Packed Seperately in Box 4.
1B
Assembly Instructions:
•Twin size
0207
Stretchers x 2
Hardware in this box.
1C
40mm Threaded Wood Bolt
x 8
30mm Wood Screws
x 12
Set of Slats x 2
ThumNut™ x 8
Patent No.: US 6,457,923
Wooden Dowels
x 8
Fit Wood Dowels to
1D
the Stretchers:
Middle Holes
Stretcher
Wooden Dowels
Long Allen Key
x 1
Tap the Wooden Dowels all the
way into the Middle holes at the
ends of the Stretchers.
Page 1 of 3
S P I C E S
B E D S A N D C A S E S
Attach the Stretchers to the Headboard and Footboard.
2A
The Headboard and Footboard are packed in
Head Board
ThumNuts™
separate Boxes with Bolts and Wood Buttons.
Leave the Bolts a bit loose, so it is easier to align
the slats. Only after everything is put together
should you tighten all the Bolts.
Note about Wood Buttons: Only fit the Wood Buttons
when the the complete bed (including the slats) is
assembled, and all the Bolts have been tightened.
Assembly Instructions:
•Twin size
0207
Bolts from the
Headboard box
Please Note:
Use 2 People!
Note: The stretcher can be fitted both ways for use with, and without a Box Spring:
With a Box Spring:
Fit the stretcher
this way...
ThumNuts™
Stretcher
Footboard
Bolts from the
Footboard box
Mattress
Box Spring
With Mattress Only:
Fit the stretcher
this way...
Mattress
Page 2 of 3
S P I C E S
B E D S A N D C A S E S
Fit the other Set of Slats between the Stretchers.
3A
Head Board
40mm Threaded
Wood Bolts
Assembly Instructions:
•Twin size
0207
Lay the other Set of slats out loosely inside
the Stretchers at the Footboard end. Fix
with 40mm Threaded Wood Bolts.
40mm Threaded
Wood Bolts
Slats
Fix the Slats in place.
3B
Head Board
Stretcher
40mm Threaded
Wood Bolts
Footboard
Open out the Slats and fix with 40mm Threaded
Wood Bolts.
40mm Threaded
Wood Bolts
Optional Wood Screws at the
end of each loose Slats. (Total 12)
Stretcher
Tighten the Bolts & Fit the Wood Buttons.
3C
Only when everything is put together and the Bolts
have been tightened, push fit the Wood Buttons into
the Bolt holes.
Footboard
Note: Optionally, you can use the
enclosed Wood Screws to fix each
slat in place. An electric screwdiver will make this much easier.
Page 3 of 3
Loading...