Night & Day Nightfall Daybed Back Panel Assembly Instruction

One pair of Daybed Arms

1A

in this Box:

Seagull Daybed Arms

1B

Hardware in this Box.

Assembly

Instructions

1106

Fix the Rails to the

1C

Daybed Arms.

Left Arm

30mm
Bolts

Note: Don't fully tighten
the Bolts until the whole
frame is put together.

30mm
Bolts

The wood strip to
support the slats should be
assembled towards the top.

Rail

30mm Bolts x 8

Long Allen Key x 1

Rail

30mm
Bolts

40mm Threaded Wood Bolts x 8

30mm Wood Screws x 12

30mm
Bolts

Right Arm

1D

Lay the slats out
between the Rails.
The end slats of each
set is fixed with 40mm
Threaded Wood
Bolts.

Fit the Slats between the Rails.

Use the Wood Screws at the
end of each loose Slats.
An electric screwdriver will
make this much easier.

Please Note:

40mm Threaded

Wood Bolts

Use 2 People!

40mm Threaded

Wood Bolts

Page 1 of 1