Fit Wooden Dowels to the Rails:
1C
Parts in this Box:
1A
Page 1 of 3
Hardware in this box.
1D
Tap the Wooden Dowels all the way
into the Middle holes at the ends
of the Rails.
Stretcher x 2
Set of Slats x 2
Wooden Dowels
x 8
Long Allen Key x 1
35mm Threaded
Wood Bolt x 8
30mm Wood Screws
x 12
Patent No.: US 6,457,923
ThumNut™ x 8
Wooden Dowels
Rail
Middle
holes
1109
Assembly Instructions:
•Twin size
Bed Rails & Slats ('K' Series)
Slats are Packed Seperately in Box 4.
1B
Page 2 of 3
Attach the Rails to the Headboard and Footboard.
The Headboard and Footboard are packed
in separate Boxes with Bolts and Wood
Buttons.
Leave the Bolts a bit loose, so it is easier to
align the slats. Only after everything is put
together should you tighten all the Bolts.
Use 2 People!
Please Note:
2A
ThumNuts™
Footboard
Rail
Bolts from the
Footboard box
Bolts from the
Headboard box
ThumNuts™
Bolts from the
Footboard box
Headboard
Bolts from the
Headboard box
Fit two Set of Slats between the Rails.
2B
Footboard
Rail
Headboard
Lay the Sets of Slats out between the Rails,
one set at the Headboard end, and the other
at the Footboard end.
Slats
35mm Threaded
Wood Bolt
Use the 35mm Threaded Wood Bolts to fix
the end slats in place.
35mm Threaded
Wood Bolt
1109
Assembly Instructions:
•Twin size
Bed Rails & Slats ('K' Series)
Page 3 of 3
3B
4A
Note: Optionally, you can use the
enclosed Wood Screws to fix each
slat in place. An electric screwdiver
will make this much easier.
Open out the Slats and fix with 35mm Threaded
Wood Bolts.
35mm Threaded
Wood Bolts
Footboard
Tighten all the Bolts and fit the Wood Buttons.
Fix the Slats in place.
When everything is put together tighten all
the Bolts. If the Headboard/Footboard have
Wood Buttons (not all do) push fit them into
the Bolt holes.
Headboard
3A
Optional Wood Screws at the
end of each loose Slats. (Total 12)
Note: Not all beds have
Wood Buttons - Check
the Head/Footboard
parts list.
Wood
Buttons
Wood
Buttons
1109
Assembly Instructions:
•Twin size
Bed Rails & Slats ('K' Series)
Loading...