Night & Day Kingston Assembly Instruction

Assembly

Instructions

One pair of Bifold Arms

1

i

Outside View Inside View

Hardware in this box

2

BIFOLD FUTON FRAME

FUTON ARMS

See below for

Preparation of arms

for assembly.

Kingston-0404

16mm Bolts x 4 Pieces:
For the Stretcher Brackets

60mm Bolts x 8 Pieces:
For the Front & Back Legs

Fasten Stretcher Brackets to Arm

3 4

Dowel
Hole

Hole
for bolt

Hole
for cleat

Leg

16mm Bolt

Allen Key

Cleat

Wood Button

x 8 Pieces

Stretcher
Bracket

Stretcher Bracket
x 4 Pieces

Allen Key
x 1 Piece

Barrel Nuts

x 8 Pieces

Wooden Dowel

x 4 Pieces

Assemble the Bifold Body

Tap Wooden Dowels all the way into the middle
hole before assembly to Arms.

Middle hole

Stretcher
(BODY BOX)

Wooden Dowel

Fit Wood Button Into Arm Holes

5

A.C.Insert the Stretcher Bracket Cleat

into the hole provided.

B. IMPORTANT: Don't fully tighten Bracket until

Stretchers are all in place for easy alignment.
Each arm requires two brackets, front and back.

Instructions for Bifold Body assembly, are packed in the Body box.

i

AFTER TOTAL ASSEMBLY:
Push fit or lightly tap

the wooden buttons
into the bolt holes
on the arms.

Page 1 of 1