Night & Day Hilton Assembly Instruction
Assembly
Instructions
Packed in this box.
1
i
BIFOLD FUTON FRAME
FUTON ARMS
Arm - Inside ViewArm - Outside View Magazine Racks x 2 Pieces
See below for
Preparation of arms
for assembly.
Hilton-0404
Hardware in this box.
2
100mm Bolts x 8
Wood Button
30mm Bolts x 8
16mm Bolts x 4
Attach Magazine Racks to Arms.
3
Using the 30mm
Bolts,fix the Magazine
Rack to the Arm.
Tighten the bolts.
30mm Bolts
x 8
Stretcher
Brackets x 4
30mm
Bolts
Barrel Nuts x 8
Wood Dowels x 4
Allen Key x 1
Magazine
Rack
Assemble the Wood Futon Body.
5
BODY INSTRUCTIONS: Instructions for assembly of
arms to the Wood Futon Body are in the BODY box.
NOTE: Fitting
Wooden Dowels
Stretcher Rail
from BODY box
Dowel from
ARM box
SPECIAL NOTE: Back and Seat Assembly.
!
Clevis Pin
Tap Wood Dowel all the way into the
middle hole before assembly to arm.
Fasten Stretcher Brackets to Arm.
4
Cleat
Dowel
Hole
Hole for
bolt
Hole for
cleat
Leg
Insert the Stretcher Bracket Cleat into the hole provided.
A.
IMPORTANT: Don't fully tighten Bracket until the
B.
Stretchers are all in place for easy alignment.
Each arm requires two brackets, front and back.C.
Instructions for Bifold Body assembly, are packed in the BODY box.
i
16mm Bolt
Stretcher
Bracket
Contrary to Assembly Instructions in the BODY box, You will
need to join both the Back Deck and the Seat Deck together,
as shown, before fitting them between the Arms.
Fit Wood Buttons into Arm Holes.
6
AFTER TOTAL ASSEMBLY:
Push fit or lightly tap
the wooden buttons
into the bolt holes
on the arms.
Page 1 of 1
Loading...