Night & Day Ginger Twin Full Bunk Assembly Instruction
A s s e m b l y I n s t r u c t i o n s
Ginger Twin F ull Bu nk Bed
!
SAFETY WARNING
Follow th e informati on on the warnings appearing on the upper bunk end structure and on
1.
the carton. Do not remove warning label from bed.
Always use the recommended size mattress or mattress support, or both, to help prevent
2.
the likelihood of entrapment or falls.
Surface of mattress must be at least 5 in. (127 mm) below the upper edge of guardrails.
3.
Do not allow children under 6 years of age to use the upper bunk.
4.
Periodically check and ensure th at the guardrail, lad d er, and other components are in their
5.
proper position, free from damage, and that all connectors are tight.
Do not allow hor seplay on or under the bed and prohib it jump ing on the bed.
6.
Always use the ladder for entering and leaving the upper bunk.
7.
Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
8.
Use of a night light may provide added safety precaution for a child using the upper bunk.
9.
Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed
10.
next to the wall, the guardrail that runs the full length of the bed should be placed against
the wall to prevent entrapment between the bed and wall.
The use of water or sleep flotation mattresses is prohibited.
11.
STRANGULATION HAZARD–Never attach or hang items to any part of the bunk bed
12.
that are not designed for use with the bed; for example, but not limited to, hooks, belts
and jump ropes.
N&D 0107
Keep these instruct ions for future reference.
13.
SIZE OF MATTRESS AND FOUNDATION:
Use only mattress, which is 37 1/2" - 38 1/2" width and 74"-75" long on upper bunk (twin size.)
Ensure that the thickness of the mattress does not exceed 6" and that the mattress surface is at
least 5" (127mm) below upper edge of guardrails.
Replacement Parts:
Replacement parts, including addition al guar drails may be ob tained from any
Night & Day Furniture Dealer.
Certified:
This bunk bed conforms to all applicable consumer product safety standards
16 CFR PARTS 1213, 1500, 1513 and ASTM F-1427
Page 1 of 9
TM
A s s e m b l y I n s t r u c t i o n s
Ginger Twin F ull Bu nk Bed
N&D 0207
Parts in Box 11A
Upper Bunk
(Left Hand)
x 1
Parts in Box 2
Lower Bunk
(Left Hand)
x 1
Parts in Box 3
Upper Bunk
(Right Hand)
Note: No Holes!
x 1
Lower Bunk
(Right Hand)
x 1
Parts in Box 4
Parts in Box 5
Upper Stretcher
(with extra holes)
Stretchers x 3
Middle Rail x 1
Ladder x 1
Rear Guard Rail x 1
x 1
Hardware in this Bo x .
1B
100mm Bol ts
x 19
40mm Bolts
x 4
40mm Threaded
Wood Bolts x 8
16mm Wood
Screws x 2
Barrel Nuts
x 23
30mm Bol ts
x 2
60mm Bolts
x 16
30mm Wood
Screws x 36
Metal Tubes
x 4
Wood Dowels
x 27
Set of Slats x 1
(Upper Bunk)
Page 2 of 9
Set of Slats x 1
(Lower Bunk)
Front Guard Rail x 1
Brackets x 4
Note:
Tools required for assem bly:
Allen Key (provided)
Phillips Screwdriver (not provided)
Long Allen Key
x 1
Fit Wood Dowels to the
2A
Stretchers.
A s s e m b l y I n s t r u c t i o n s
Ginger Twin F ull Bu nk Bed
Attach Stretchers and the Middle Rail to the Lower Bunks.
2C
N&D 0207
Please Note:
Stretcher
Middle
holes
Fit Wood Dowel to the
2B
Middle Rail.
Middle Rail
Middle
hole
Wooden Dowels
Wooden Dowels
Note: The Left hand Bottom Bunk has
extra holes which assemble towards
the front.
100mm
Bolts
Lower Bunk
(Left Hand)
Stretcher
Barrel Nuts
THIS EN D
FRONT
Middle Rail
Stretcher
Barrel Nuts
Use 2 People!
Note: The Right hand Bottom Bunk
has extra holes which assemble
towards the front.
100mm
Bolts
60mm
Bolts
Page 3 of 9
Bolt and Barrel Nut Assembly.
Do not force the Bolt as you may strip the
thread. Be sure the thread is properly started.
Be sure the holes are free of wood chips
and saw dust.
Lower Bunk
(Right Hand)
100mm
Bolts
Loading...