S P I C E S
B E D S A N D C A S E S
Assembly Instructions:
•California King size
0408
Parts in this Box:
1A
Small Legs x 5
Wooden Feet x 5
Slats are Packed Seperately in Box 4.
1B
Center Rail x 1
Stretchers x 2
Set of Slats x 2
Single Slat x 1
Hardware in this box.
1C
80mm Bolts x 5
60mm Bolts x 5
30mm Wood Screws x 12
Fit Wood Dowels to the
1D
Stretchers:
Tap the Wooden Dowels
all the way into the Middle
holes at the ends of the
Stretchers.
Barrel Nuts x 10
Wooden Dowels x 8
40mm Threaded Wood
Bolts x 12
Fit the Small Legs to the Center Rail.
1E
60mm Bolt
ThumNut™ x 8
Patent No.: US 6,457,923
Long Allen Key
x 1
Center Rail
Wooden
Dowels
Middle
Holes
Stretcher
Barrel
Nut
Small Leg
Page 1 of 4
S P I C E S
B E D S A N D C A S E S
Attach the Stretchers to the Headboard and Footboard.
2A
The Headboard and Footboard are packed in
separate Boxes with Bolts and Wood Buttons.
Assembly Instructions:
•California King size
0408
Head Board
Bolts from the
Headboard box
Please Note:
ThumNuts™
Stretcher
Leave the Bolts a bit loose, so it is easier to align
the slats. Only after everything is put together
should you tighten all the Bolts.
Note about Wood Buttons: Only fit the Wood Buttons
when the the complete bed (including the slats) is
assembled, and all the Bolts have been tightened.
ThumNuts™
Bolts from the
Footboard box
Use 2 People!
Note: The stretcher can be fitted both ways
for use with, and without a Box Spring:
With a Box Spring:
Fit the stretcher
this way...
...and use the small
legs without the
wooden feet.
With Mattress only:
Fit the stretcher
this way...
...and fit the wooden
feet to the small legs.
(Step 2B)
Mattress
Box Spring
Mattress
Footboard
Bolts from the
Footboard box
For Mattress Only: Fit the
2B
Wooden Feet to the Small Legs.
80mm Bolt
Wooden Foot
Small Leg
Barrel Nut
Page 2 of 4
S P I C E S
B E D S A N D C A S E S
Fit one Set of Slats between the Stretchers.
3A
Head Board
40mm Threaded
Wood Bolt
Assembly Instructions:
•California King size
0408
Lay one Set of Slats out loosely inside the
Stretchers as shown below.
Use two of the 40mm Threaded Wood
Bolts to fix the end slat in place.
40mm Threaded
Wood Bolt
Set of Slats
Fit the Center Rail.
3B
Head Board
Stretcher
Footboard
Position the Center Rail with the Small
Legs beneath the Slats. Line up the hole
in the Center Rail with the center hole in
the Slat. Bolt it in place with a 40mm
Threaded Wood Bolt.
40mm Threaded
Wood Bolt
Center Rail
Stretcher
Footboard
Page 3 of 4
S P I C E S
B E D S A N D C A S E S
Fit the other Set of Slats between the Stretchers.
4A
Head Board
Assembly Instructions:
•California King size
0408
Lay the other Set of slats out loosely inside
the Stretchers at the Footboard end. Fix
with 40mm Threaded Wood Bolts.
40mm Threaded
Wood Bolts
40mm Threaded
Wood Bolts
Slats
Fix the Slats in place.
4B
Head Board
Stretcher
40mm Threaded
Wood Bolts
Footboard
Open out the Slats and fix with 40mm Threaded
Wood Bolts.
40mm Threaded
Wood Bolts
Optional Wood Screws at
the end of each loose
Slats. (Total 12)
Stretcher
Tighten the Bolts & Fit the Wood Buttons.
4C
Only when everything is put together and the Bolts
have been tightened, push fit the Wood Buttons into
the Bolt holes.
Footboard
Note: Optionally, you can use the
enclosed Wood Screws to fix each
slat in place. An electric screwdiver will make this much easier.
Page 4 of 4
Loading...