Night & Day Carmel Bed Assembly Instruction

C A R M E L B E D

Assembly Instructions:

• All Sizes

1208

Parts in Box 1:

1A

Parts in Box 2:

1B

Headboard x 1

Footboard x 1

Wood Block

(Left Hand) x 1

Wood Block

(Right Hand) x 1

Hardware:

Barrel Nuts x 4

40mm Bolts x 4

80mm Bolts x 4

Hardware:

Wood Buttons x 4 Barrel Nuts x 4

100mm Bolts x 4

Parts in Box 3:

1C

Parts in Box 4:

1D

Stretcher x 2

Center Rail x 1

Small Leg x 3

Hardware:

60mm Bolts

x 3

30mm Wood Screws

x 16

Long Allen Key x 1

Wooden Dowels

x 16

Barrel Nuts

x 3

40mm Threaded Wood Bolts

x 10

(x 12 for C.King Only)

Set of Slats x 2

Extra Parts for C.King Only: Single Slat x 1

Page 1 of 5

C A R M E L B E D

Fit Wood Dowels to the Stretchers:

2A

Tap the Wooden Dowels all the way
into the Dowel holes at the ends of
the Stretchers.

Bolt the Wood Blocks to the Headboard.

2B

Wooden
Dowels

Assembly Instructions:

• All Sizes

1208

Stretcher

Dowel Holes

Full / California King Assembly.

Wood Block

40mm
Botls

Headboard

(Left Hand)

Queen / Eastern King Assembly.

40mm
Botls

Headboard

Wood Block
(Left Hand)

Bolt the Wood Blocks using the Inside Holes. Bolt the Wood Blocks using the Outside Holes.

Fit the Small Legs to the Center Rail.

2C

60mm Bolt

Small Leg

Center Rail

Barrel
Nut

Page 2 of 5

C A R M E L B E D

Attach the Stretchers to the Headboard and Footboard.

3A

The Headboard and Footboard are packed in
separate Boxes with Bolts and Wood Buttons.

Assembly Instructions:

• All Sizes

1208

Headboard

Bolts from the

Headboard box

Please Note:

Barrel
Nuts

Stretcher

Leave the Bolts a bit loose, so it is easier to
align the slats. Only after everything is put
together should you tighten all the Bolts.

Note about Wood Buttons: Only fit the Wood
Buttons when the the complete bed (including
the slats) is assembled, and all the Bolts have
been tightened.

Barrel
Nuts

Footboard

Bolts from the

Footboard box

Use 2 People!

Fit one Set of Slats between the Stretchers.

3B

Head Board

40mm
Threaded
Wood Bolt

Stretcher

Lay one Set of Slats out loosely inside the
Stretchers as shown below.

Use two of the 40mm Threaded Wood
Bolts to fix the end slat in place.

40mm
Threaded
Wood Bolt

Set of Slats

Footboard

Page 3 of 5

Fit the Center Rail.

4A

Head Board

C A R M E L B E D

Position the Center Rail with the
Small Legs beneath the Slats. Line
up the hole in the Center Rail with the

40mm
Threaded
Wood Bolt

center hole in the Slat. Bolt it in place
with a 40mm Threaded Wood Bolt.

Center Rail

Assembly Instructions:

• All Sizes

1208

Stretcher

C.King Only: Fit the Single Slat between the Stretchers.

4B

Head Board

40mm Threaded

Wood Bolt

Footboard

Lay the Single Slat inside the
Stretchers and fix with 40mm
Threaded Wood Bolts.

40mm Threaded

Wood Bolt

Stretcher

Single Slat

Footboard

Page 4 of 5

C A R M E L B E D

Fit the other Set of Slats between the Stretchers.

5A

Head Board

Assembly Instructions:

• All Sizes

1208

Lay the other Set of slats out loosely
inside the Stretchers at the Footboard
end. Fix with 40mm Threaded Wood
Bolts.

40mm Threaded
Wood Bolts

Slats

Fix the Slats in place.

5B

Head Board

Stretcher

40mm Threaded

Wood Bolts

Footboard

Open out the Slats and fix with 40mm
Threaded Wood Bolts.

40mm Threaded

Wood Bolts

Optional Wood Screws at the
end of each loose Slats. (Total 16)

Stretcher

Note: Optionally, you can use the
enclosed Wood Screws to fix each
slat in place. An electric screw-diver
will make this much easier.

Footboard

Page 5 of 5