Night & Day Boston Assembly Instruction

Assembly

Instructions

One pair of Bifold Arms.

1

i

BIFOLD FUTON FRAME

FUTON ARMS

Inside ViewOutside View

See below for

Preparation of arms

for assembly.

Boston-0404

Hardware in this box.

2

80mm Bolts x 8 Pieces
For the Front & Back Leg

Wooden Dowel

x 4 Pieces

Barrel Nuts

x 8 Pieces

Fasten Stretcher Brackets to Arm.

3

Dowel
Hole

Wood Button

x 8 Pieces

Stretcher Bracket

x 4 Pieces

Cleat

16mm Bolts
x 4 Pieces

Allen Key

x 1 Piece

Assemble the Bifold Body.

4

BODY INSTRUCTIONS: Instructions for assembly of
arms to the Bifold Body are in the BODY box.

NOTE: Fitting

Wooden Dowels

Stretcher Rail
from BODY box

Dowel from
ARM box

SPECIAL NOTE: Back and Seat Assembly.

!

Clevis
Pin

Tap dowel all the way into this
hole before assembly to arm.

Hole for
bolt

Hole for
cleat

Leg

A.C.Insert the Stretcher Bracket Cleat

into the hole provided.

B. IMPORTANT: Don't fully tighten Bracket until

Stretchers are all in place for easy alignment.
Each arm requires two brackets, front and back.

Instructions for Bifold Body assembly, are packed in the Body box.

i

16mm Bolt

Allen Key

Stretcher
Bracket

Contrary to Assembly Instructions in the BODY box, You will
need to join both the Back Deck and the Seat Deck
together, as shown, before fitting them between the Arms.

5

AFTER TOTAL ASSEMBLY:
Push fit or lightly tap

the wooden buttons
into the bolt holes
on the arms.

Fit Wood Buttons into Arm Holes.

Page 1 of 1