Night & Day Biltmore Assembly Instruction
Page 1 of 8
1A
Parts in this box.
1B
Hardware in this box.
Queen size only:
Extra parts.
1C
BIFOLD FUTON FRAME
Assembly Instructions
Full Size • Queen Size
Clevis Pins
x 2
Long Allen Key
x 1
Metal Bracket
x 4
Wooden
Dowels x 18
Wood Buttons
x 4
Barrel Nuts
x 18
16mm
Bolts x 16
30mm
Bolts x 12
60mm
Bolts x 14
80mm
Bolts x 4
B3 Roller complete
with Clevis pin,
Washer and
Locking pin x 4
Back Side Rails x 2
Arms x 2
Stretchers x 2
Back Rails and Slats x 1
Seat Rails and Slats x 1
Seat Side Rails x 2
Full Size: Slat Supports x 6
2pc with extra holes
& plastic stoppers
2pc with extra holes
Queen Size: Slat Supports x 6
2pc with extra holes
& plastic stoppers
2pc with extra holes
3pc are longer for
the Back deck
50mm Bolts x 2
Short Legs x 2
BILTMORE ARM
Use 8pc of 60mm Bolts to attach the arms
to the Stretchers.
*Note:
0309
30mm Bolts
30mm Bolts
16mm Bolt
16mm Bolt
16mm Bolts
16mm Bolts
Page 2 of 8
2A
The Back Deck slat bundle is longer than the seat.
Identify the correct slat supports as shown below,
and fit under the slats. *Queen size please
note: The Slat supports for the Back
Deck are longer than on the Seat.
Fit the Slat Supports to the Back Deck.
TM
CONTINENTAL
FRAME
Assembly Instructions
Full Size • Queen Size
Slat support*
without Holes.
Slat support*
with Holes.
Back Deck Rails
and Slats (longer)
Slat support*
with Holes.
Holes.
Holes.
Important! Leave the bolts a bit loose.
16mm Bolt 30mm Bolt
BIFOLD FUTON FRAME
BILTMORE ARM
2B
Use the 16mm Bolts and the
30mm Bolts to attach the
Slat supports, but
do not fully tighten them yet!
Clevis
pins
Washers
Locking
pins
Back Side Rail
B3
Rollers
Fit the B3 Rollers to the
Back Side Rails
0309
60mm Bolt
60mm Bolt
Wooden Dowels
Barrel Nut
Barrel Nut
Wooden Dowels
Barrel Nut
Wooden Dowels
60mm Bolt
60mm Bolt
Barrel Nut
Barrel Nut
Wooden Dowels
Back Side Rail
(Right Hand)
Back Side Rail
(Left Hand)
The Bolts should be left
loose to make aligning
the parts easier.
Push fit or lightly tap the Wooden dowels into the ends of the
Seat deck. Use 60mm bolts and Barrel nuts to fix the
Back Side Rails to the Back deck.
Do not fully tighten any of the bolts yet!
Page 3 of 8
3A
Assemble the Side Rails to the Back Deck.
TM
CONTINENTAL
FRAME
Assembly Instructions
Full Size • Queen Size
Wood
Button
Wood
Button
Only when all the parts are correctly
in place, should you tighten all the Bolts.
Finally, fit the two wood buttons.
BIFOLD FUTON FRAME
BILTMORE ARM
0309
Loading...