Night & Day Autumn Assembly Instruction
Fit Wood Brackets to the Arms.
Fasten Stretcher Brackets to Arm.
See below for
Preparation of arms
for assembly.
i
Hardware in this box.
2
3
Page 1 of 1
4
5
Assembly
Instructions
1
One pair of Bifold Arms.
i
BODY INSTRUCTIONS: Instructions for assembly of
arms to the Wood Bifold Body are in the BODY box.
Assemble the Bifold Body.
Before you attach the Wood
Brackets, make sure all other
Bolts are firmly tightened.
Only after the Arms and Body have been completely
assembled, fix the Wood Brackets to the Arms.
Lift the Seat Deck to access the Bolt holes.
BA-AUT-0908
Instructions for Bifold Body assembly, are packed in the Body box.
BIFOLD FUTON FRAME
FUTON ARMS
Inside ViewOutside View
Wood Brackets
x 4
Barrel Nuts x 8 Pieces
Stretcher Bracket
x 4 Pieces
16mm Bolts x 4 Pieces
For the Stretcher Brackets
Allen Key x 1 Piece
Wooden Dowel x 4 Pieces
60mm Bolts x 8 Pieces
For the Front & Back Legs
40mm Bolts x 8 Pieces
For the Wood Brackets
Hole for cleat
Leg
Dowel Hole
Stretcher
Bracket
16mm Bolt
Allen Key
Hole for bolt
A.
C.
Insert the Stretcher Bracket Cleat
into the hole provided.
Each arm requires two brackets, front and back.
B. IMPORTANT: Don't fully tighten Bracket until
Stretchers are all in place for easy alignment.
Cleat
Dowel from
ARM box
Stretcher Rail
from BODY box
Tap dowel all the way into this
hole before assembly to arm.
NOTE: Fitting
Wooden Dowels
40mm Bolt
40mm Bolt
Wood
Bracket
Front Leg
Loading...