Potter’s Wheel Instruction Manual
Thank you for your purchase of the SHIMPO RK-WHISPER Potter’s
wheel. This manual is provided for you to enjoy throwing clay safely,
describing how to use the SHIMPO RK-WHISPER and giving several
warnings for safe operation. Please read this manual before you
start using the wheel and keep it near the wheel for your reference.
NIDEC CORPORATION
The Whisper Series offers the power, resilience and qui et ness that
Shimpo wheels are known for. Features of the RK Whisper in clude
Heavy-duty steel construction assures long service life.
Brushless DC motor direct drive system en sures powerful,
essentially noiseless op er a tion.
Unique closed loop micro- controller maintains required speed
under heavy load.
Fixed foot pedal with hand lever offer ex i bil i ty in
speed adjustment.
Clockwise and counter-clockwise wheelhead rotation.
Two year warranty.
If upon delivery shipping damage is detected, do not operate the
wheel. Notify the shipping carrier immediately for damage claim
in struc tions. Refer to product nameplate and record serial number
for future ref er ence.
Instruction manual.
T-wrench (for tightening wheelhead).
Allen wrench for
at tach ing foot ped al.
feet.
Foot pedal with hand
le ver and grip knob.
Spanner for adjusting
Two-piece splashpan.
yellow splashpan
This machine is built specifically for use as a potter's wheel.
Use for purposes other than pot tery may put you at risk of danger or harm
Do not use your wheel with any voltage other than that spec i ed.
Do not plug power cord into an extension cord (plug directly into
an elec tri cal wall outlet). Do not pull on the power cord to unplug;
pull off at plug.
Do not overload the wheelhead with more than the recommended
weight of clay. Do not force the wheel to stop as this may damage
your wheel.
Set up the potter's wheel on a level surface. The top right foot
is adjustable and will aid you to level the wheel.
Remove the metal cover only when adjusting the pedal stiffness.
Refer all elec tri cal repairs to a qual i
After operating, before cleaning or inspection:
1. Turn ON/OFF switch to OFF
2. Unplug wheel from power source
ed electrical tech ni cian.
The following steps should be followed BEFORE operating the wheel
1. Remove wheel from shipping box.
2. Place wheel on a rm and stable work surface.
3. Foot pedal and splashpan are shipped dis as sem bled.
Remove them from their packing material.
4. Install pedal.
5. Level the wheel.
6 Attach the Two-Piece Splashpan to the
wheel, seating it under the ange of
the bear ing holder (under the wheelhead)
yellow pan
splash pan A
wheel head
B holder
fastener
pin
splash pan B
white pan
splash pan A
(located un der the wheelhead ).
wheel head
splash pan B
wheel head
Splash pan
Handle
Adjustable foot
Foot pedal
Power Cord
FWD/REV switch
Motor breaker(Power switch)
1.Plug in rmly.
2.Turn on the power switch.
3.Turn FWD/REV switch in re quired direction
of rotation.FWD - clock wise, REV - counter
clock wise.
4.Depress the speed pedal so that the
wheel head will turn.
5.Press pedal forward to increase speed or
back ward to decrease speed. Press fully
back to stop the wheel.
6.Change direction of rotation with the
FWD/REV switch.
STOP
STOP
FAST
FAST
STOP
STOP
7.DO NOT change rotation direction while
STOP
motor is running. Do so only after
wheelhead has come to a complete stop.
8.At "0" rpm the wheelhead can be turned
freely for use as a banding wheel.
Adjust the stiffness
●
Pedal might get stiff or loose after long year usage.
In this case, please adjust the stiffness by following procedures.
Turn off the power and unplug the cord.
Remove the legs and cover with the
provided wrench.
STOP
Adjust the stiffness of the pedal by
tightening the nut in the pedal shaft
with the provided wrench.
Fix the cover and legs after adjustment.
Do not touch the other parts.
It might cause defects.
●Turn ON/OFF switch to OFF and unplug your wheel from the power
source before cleaning or inspection.
●Never hose down the machine. Clean off the potter's wheel with a
damp cloth. Drain your splashpan regularly to avoid a build up of
excessive water and clay. Detach the splashpan after each use and
clean out thoroughly.
Touching switches or plugs with wet hands may result in electrical shock.
●
●Your wheel comes with rubber handles provided for covering the
handle openings. Promptly replace any loose or missing rubber handles.
Do not insert your ngers or any objects in through these openings.
●Do not tamper with the electrical circuit and controller of your wheel.
You may be at risk of getting an electrical shock. Your potter's wheel
is a precision instrument and it is advised that you refer operation
or performance complaints to a Shimpo-referred, qualied technician.
●Use good judgement and caution when in use around children.
Adult supervision must be provided when using around children.
●Take off metal accessories such as rings and watches before handling.
●Do not pick up the wheel by the wheelhead. You may bend the shaft.
Lift using only the handles.
●Unplug your wheel from power source if you will not be using it for an
extended period of time.
Model: SHIMPO RK-WHISPER
Motor: 400W AC115V AC.60Hz
Drive System: Direct drive DC brushless motor with electric speed control
Wheel head speed: 60Hz 0~250rpm
Speed control:Fixed foot pedal with lever.
Wheel head direction: clock wise/counter clock wise
Wheel head: Light alloy casting, diameter 12” drilled for bat pins
Dimensions: 20”(width)
21” (Length) 20” (Height)
Ship Weight: 110 lbs
LIMITED EXPRESS WARRANTY
Shimpo warrants, to the original purchaser of new products only, that this product shall be
free from defects in workmanship and materials under normal use and proper maintenance
for two years from the date of original purchase. This warranty shall not be effective if the
product has been subject to overload, misuse, negligence, or accident, or if the product has
been repaired or altered outside of Shimpo's authorized control in any respect which in
Shimpo's judgment, adversely affects its condition or operation.
DISCLAIMER OF ALL OTHER WARRANTIES
The foregoing warranty constitutes the SOLE AND EXCLUSIVE WARRANTY and Shimpo
hereby disclaims all other warranties, expressed, statutory or implied, applicable to the
product, including, but not limited to, all implied warranties of merchantability and tness.
LIMITATION OF REMEDY
Buyer must have Shimpo's authorization before returning the product, properly repackaged,
freight prepaid to Shimpo to obtain warranty service.
Under this warranty Shimpo's SOLE OBLIGATION SHALL BE TO REPAIR OR REPLACE
the defective product or part, at Shimpo's option. Shimpo reserves the right to satisfy warranty obligation in full by reimbursing Buyer for all payments made to Shimpo, whereupon,
title shall pass to Shimpo upon acceptance of return goods.
INDEMNIFICATION & LIMITATION OF DAMAGES
Buyer agrees to indemnify and hold Shimpo harmless from and against all claims and damages, imposed upon or incurred, arising, directly or indirectly, from Buyer's failure to perform
or satisfy any of the terms described herein. In no event shall Shimpo be liable for injuries of
any nature involving the product, including incidental or consequential damages to person or
property, any economic loss or loss of use.
MERGER CLAUSE
Any statements made by the Seller's representative do not constitute warranties except
to the extent that they also appear in writing in this contract.
This writing constitutes the entire and nal expression of the parties' agreement.
MANUFACTURED BY
NIDEC-SHIMPO CORPORATION
175 Wall Street
Glendale Heights, IL 60139
Phone: 1-800-237-7079 Fax: 630-924-0340
Loading...