NHT Classic Absolute Zero, Classic N-2B, Classic Two, Classic Three, Classic Four Setup Manual

Classic

Loudspeakers

Tw o

Absolute

Zero

Setup Guide

rev 906

NHT's Classic Series represents our best efforts to date in passive loudspeaker
design. Classic starts with the design fundamentals that have made NHT's
reputation for accuracy and high performance, and adds new driver and cabinet
technologies which reduce distortion and improve dispersion. The benefit to you
is a more articulate, more musical listening experience.

All Classic Series models share a similar "voice" or tonality so that you are
assured a matched system no matter which models you decide to add as you
build your system.

The following Setup Guide will help you unpack, connect and place your new
Classic loudspeakers in your listening room. If you are interested in specifications
or the technology used in the design, please visit our website at www.nhthifi.com
and look up information on your specific model. If at any time during or after setup
you require assistance, feel free to call our Customer Hotline at 1-800-NHT-9993
(800-648-9993).

This Setup Guide addresses the following models: Absolute Zero and the Two.
Both are 2-way, acoustic suspension systems and are compact enough to hang
on walls, be placed on shelves or put on stands. As a note, NHT no longer sells
speaker stands, but your authorized dealer can help you find a stand for your
specific requirements.

Unpacking your Speakers

As you unpack your Classic bookshelf speakers, you will notice two silver alu­minum bars with attached rubber rails included in the carton. These will require
mounting to the bottom of each speaker if you decide to place your speakers
either on stands or on shelves. Fig. 1 demonstrates how to mount the bars to the
bottom of the cabinet.

Fig. 1

If you plan to hang your speakers on the wall, you will need to purchase brackets
to accomplish this. On the back of the speaker cabinet are either one or two 1/4”­20 threaded inserts located underneath a 3/8” hole. The threaded inserts are used
to mount a speaker bracket. NHT recommends that you use OmniMount brackets

- please ask your authorized NHT dealer or you can visit OmniMounts web site at
www.omnimount.com or call their toll-free number at 1-800-668-6848.
OmniMount makes a variety of sizes and arm lengths. For the Absolute Zero, and
the Two, use their 20 series. Instructions for mounting are available from
OmniMount. Caution: The speakers are heavy enough that if not mounted
properly to a wall stud they could fall. If you are not comfortable with completing
this operation yourself, ask your dealer for assistance or contact a professional.

Placement

It is important to know that small changes in speaker position can have an effect
on sound quality. Moving speakers nearer to walls or corners will increase bass
output, but also may make them sound "boomy.” Placing them farther away from
room boundaries tends to decrease bass output, but can improve stereo imaging.

Room furnishings also play an important role. Soft furnishings (sofas, carpets,
curtains) absorb mid and high frequencies, which can dull the sound, while hard
surfaces and sparse furnishings tend to brighten it. These are typically minor
variations in sound quality. Experimenting with the effects of different placements
in your own listening environment is the key to finding the sound you like best.

Here are some tips for maximizing the performance of your speaker system:

Position the speaker 1.5 times as far away from you as they are from each

other. (Fig. 2)

Fig. 2

Left and Right speakers should be equidistant from the listening position.
Try to keep tweeter height close to ear level when in the listening position.

Speakers should be placed upright.

Try to keep the speakers near the front edge of shelves or cabinets.

Point them inward slightly toward the listening position.

For surround systems, use the same basic setup - all shown in (Fig. 3) - and
when possible:

Place the center channel speaker right above or below the TV.

Place the rear speakers in an equilateral triangle with the listening position,
at least 5' apart.

Rear speakers should be at the same height, or higher than, the front
channels.

Obviously many rooms will not allow ideal placement. As a general rule, try to
keep the rear channel speakers equidistant from the center of the listening area.
If the rear speakers have to be close to the main seating area, add time delay to
them in your surround processor to make them seem farther away, and make sure
they are placed high, above the heads of the listeners.

Fig. 3

Connections

Before connecting your Classic speakers to your receiver/amplifier, turn off the AC
power to avoid potential damage to your components.

Take a look at the terminals on the back of your speakers. They can accept raw
wire, banana plugs or spade lugs. Note that these terminals should be tightened
only by hand, as excess force can break them. We recommend your speaker wire
be at least 16 gauge. Your NHT dealer can recommend the correct wire. Use the
same length of wire for each channel.

Prepare the wires by stripping ¼" - 3/8" of insulation from the ends and tightly
twist the exposed strands.

Finally, connect your speakers to your amplifier or receiver, making sure that the
speakers are "in phase,” that is, the same half of the wire pair connected to the
Positive terminal (+, usually red) on both the amplifier and the speaker. The other
half of the same wire connected to the Negative (-, usually black) terminals on
both amplifier and speaker.

Most speaker wire has one half of the pair marked with either lettering, ridges, the
"+" sign or color to help you make the proper connections.

Before powering up your receiver/amplifier, make sure there are no stray strands
from one terminal touching the other terminals. Also, try to keep speaker wires
from laying across AC power cords.

Operation

All NHT Classic speakers are compatible with most amplifier power ranges and
are designed to handle a wide range of listening levels. Every speaker, however,
has limits and it is important to listen for them. Speaker damage most often
occurs from sustained high volume levels in some or all frequencies. Try to avoid
excessive bass or treble settings or equalizer boosts.

The best tool you have is your ears. If you hear unusual distortion or breakup,
decrease the volume immediately. If you are unsure, place your hand close the
woofer. If you feel heat radiating from the driver, you are playing the system
beyond its limits.

Maintenance

Your NHT speakers will require little if any maintenance under normal use. Try to
avoid exposing them to direct, sustained sunlight, high temperatures or moisture.
Cabinets can best be dusted using a clean, soft chamois cloth. The finish on your
speakers is durable but dry rough cloth can leave fine scratches over time. Try to
avoid using liquid cleaners and household furniture polish, particularly around the
speaker components. To clean grilles, remove them from the speaker and use a
soft brush or a vacuum on its lowest setting. Do not attempt to clean the speak­er components.

Satisfaction

We hope you enjoy the sound of your NHT Classic speakers as much as we do.
Your warranty is printed on the back of this Setup Guide. Once again, if you have
any questions or problems, please call us at our Consumer Hotline.

Limited Warranty

Valid Only in the U.S.A.

Warranty Period

For a period of 5 years for parts and 5 years for labor (1 year parts and 90 days labor for electronics) from the
date this product is first purchased from an authorized NHT dealer, Now Hear This (NHT) warrants that if it fails
to function properly due to a manufacturing defect, despite its being installed and operated according to these
instructions and used under normal conditions, it will be either replaced or repaired with new or rebuilt parts (both
at NHT's option) with a unit of comparable value without charge to you.

What's Not Covered

Altered, defaced or removed serial numbers void this warranty.

This warranty does not cover any product used in trade, business, industrial or commercial applications.

This warranty also does not cover the cabinet or appearance factors, or costs, defects or damage resulting from
misuse, abuse, accident, improper maintenance, alterations or modifications not authorized in writing by NHT, or
parts or labor from any source other than an authorized NHT service location.

Damage due to power exposure in excess of the speaker's published power ratings; ie, overpowering, lightning
or power surges, are also not covered.

Your Rights

This warranty gives you specific legal rights, and you may have other rights which vary from state to state.

NHT limits this warranty to the purchase price of the product, excludes incidental or consequential damages, and
limits its obligations under any implied warranties under state laws to a period not exceeding their warranty peri­ods. As some states do not allow the above limitations, however, they may not apply to you.

To Obtain Service

To find the name and address of the nearest authorized NHT service location, call or write:

Customer Service Department, NHT, 6400 Goodyear Rd., Benicia, CA 94510, 1-800-NHT-9993 (648-9993),

www.nhthifi.com

For your future convenience, please keep this warranty with your sales receipt, and record date and

place of purchase for further reference

.

Absolute

Zero

Two

Three Four Two C

Ten

System Type

Driver Complement

Tweeter-

Woofer-

Video Shielded Unless Noted

Response

Sensitivity

Impedance

Recommended

Amplifier Power RMS

Weight

Dimensions

Finish

2-Way Acoustic

Suspension

2-Way Acoustic

Suspension

3-Way Acoustic

Suspension

0.75” fluid cooled aluminum dome

with neodymium magnet structure

1” fluid cooled aluminum dome

with neodymium magnet structure

Midrange-

2” fluid cooled aluminum dome with neodymium magnet structure

4-Way Bass

Reflex

5.25”

Polypropylene

Maximum 100 watts Maximum 125 watts

Maximum 150 watts

Maximum 250 watts

Maximum 175 watts

71Hz - 20kHz

+/- 3dB

86dB / 2.83v 86dB / 2.83v 86dB / 2.83v 86dB / 2.83v 87dB / 2.83v

51Hz - 20kHz

+/- 3dB

45Hz - 20kHz

+/- 3dB

27Hz - 20kHz

+/- 3dB

78Hz - 20kHz

+/- 3dB

6 ohm nominal

6 ohm nominal 8 ohm nominal 6 ohm nominal 8 ohm nominal

9.75 x 5.625 x 7.25

8 lbs.

12.7 lbs. 17 lbs. 64.3 lbs. 20 lbs. 41 lbs.

12.125 x 7 x 8.875

13.75 x 7.5 x 10.375 41 x 7.5 x 16 6.5 x 19.875 x 7.375 18.125 x 11.25 x 15

White or Black

High Gloss Piano

Finish

White or Black

High Gloss Piano

Finish

Black

High Gloss Piano

Finish

Black

High Gloss Piano

Finish

Black

High Gloss Piano

Finish

Black

High Gloss Piano

Finish

6.5”

Polypropylene

6.5”
Aluminum

(2) 5.25”

Aluminum

10”

Aluminum

(Not Video Shielded)

6.5” and 10”

Aluminum

3-Way Acoustic

Suspension

Bass Reflex /

Powered - 150 watts

Class G Amplifier

H” x W” x D”

Classic

Three C

Maximum 200 watts

87dB / 2.83v

73Hz - 20kHz

+/- 3dB

8 ohm nominal

23 lbs.

7 x 21.875 x 8.25

Black

High Gloss Piano

Finish

(2) 6.5”

Aluminum

3-Way Acoustic

Suspension

All Classic Series products are sonically matched for seamless integration into multichannel systems.

31Hz - 180Hz

+/- 3dB

Twelve

49 lbs.

20.125 x 14 x 15.75

Black

High Gloss Piano

Finish

12”

Aluminum

(Not Video Shielded)

Bass Reflex/

Powered - 250 watts

Class G Amplifier

27Hz - 180Hz

+/- 3dB