NHBoard TGN, TGN70, TGU70, TGN83, TGU83 Installation And User Manual

...

Download

Installation and User Guide of NHBoard

Installation

And User Guide

For NHBoard TGN Series

Interactive Whiteboard System

NANHAO (Beijing) Science and Technology Co., Ltd. Add: 1207, 1208 Room, 1+1 Plaza, NO.10 Caihefang Road,

Zhongguancun, Haidian District, Beijing, China. Tel: 0086-10-51666146 Fax: 0086-10-82893921 Web: www.nhboard.ne t

Installation and User Guide of Board Ideas of Interaction

FCC Warning

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment.

This device complies with Part 15 of the FCC Rules. Operation is s ubject to the following two conditions: (1)

this device may not cause harmful inte rference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Product Registration

If you register your NHBoard product, we can notify you of new features and software

upgrades.

Keep the following information available, in case you need to contact

Technical Support:

Serial Number _____________________________________

Date of Purchase ___________________________________

Installation and User Guide of Board Ideas of Interaction

Contents

CONTENTS ............................................................................................................................................. 3

IMPORTANT INFORMATION.................................................................................................................... 5

Safety Warnings ..................................................................................................... 5

Other Precautions .................................................................................................. 6

BRIEF INTRODUCTION OF NHBOARD ...................................................................................................... 7

Features& Highlights .............................................................................................. 7

How Does NH Board Work?...................................................................................... 8

INSTALLING AND SETTING UP NHBOARD ................................................................................................ 8

Environme ntal requireme nts .................................................................................. 8

Wall-Mounting Inst ruction ...................................................................................... 9

USING IN GUIDE ................................................................................................................................... 19

NHBoard-T V 3.1 Toolboxes .................................................................................. 19

About the Home Toolbox ...................................................................................... 20

About the Insert Toolbox ...................................................................................... 23

About the Screen Toolbox ..................................................................................... 24

About the Floating Tool Palette ............................................................................. 25

NHBOARD-T V3.1 TUTORIAL ................................................................................................................. 26

About Tutorial ...................................................................................................... 26

What is NHBoard-T V3.1 Flipchart? ....................................................................... 26

Tutorial One--- Pen, Eraser, Clipboa rd ................................................................... 27

Tutorial Two--- Format ......................................................................................... 33

Tutorial Three--- Page and View ........................................................................... 35

Tutorial Four--- Table, Picture, and Shape ............................................................. 36

Tutorial Five--- Resources Gallery ......................................................................... 39

Tutorial Six--- Chart ............................................................................................. 41

Installation and User Guide of Board Ideas of Interaction

Tutorial Seven--- Textbox ..................................................................................... 45

Tutorial Eight--- Video, Music, Flash ...................................................................... 47

Tutorial Nine--- Handwriting Recognition .............................................................. 48

Tutorial Ten--- Microsoft Word/Excel/PowerPoint annotation and recognition ....... 50

Tutorial Eleven --- Screen Tools ............................................................................ 55

Tutorial Twelve --- Mark Tools .............................................................................. 58

Tutorial Thirteen --- Screen Capture, Recorder and Video Player ............................ 61

Tutorial Fourteen --- Calculator, Cloc k and Screen Keyboard .................................. 63

Tutorial Fifteen --- Customization ......................................................................... 65

Tutorial Sixteen --- Changing Style and UI language .............................................. 67

Well done! ........................................................................................................... 68

FREQUENTLY QUESTION ...................................................................................................................... 68

What are the basic devices required by a whiteboard? ........................................... 69

Which type of projecto rs ca n be used with NH Board Interactive Whiteboard? ........ 69

Why is the image projected by the projector in the shape of the wrong size or distorted

distorted a nd how to adjust it? ............................................................................. 69

If words can be input on only certain areas of the whiteboard, what should I do? .. 70

Can I use common USB lines on the local market to connect the whiteboard and a

compute r? ........................................................................................................... 70

In which cases should I perform Position setting/ca librat ion? ............................... 70

When the software sta rt, a prompt "Communication with t he whiteboard failed. Check

Check that the whiteboa rd is correctly connected to the computer". In this case, what

should I do? ......................................................................................................... 71

Why certa in anchor points cannot be not iced when I locate the whiteboa rd? ......... 71

How to transm it data between the whiteboard and the computer over a long distance?

........................................................................................................................... 71

How to clean the plane of the whiteboard? ............................................................ 72

AFTER-SALES SERVICE ......................................................................................................................... 72

DISTRIBUTOR/AGENT TUTORIAL.......................................................................................................... 73

PRIVACY DECLARATION ....................................................................................................................... 74

Installation and User Guide of Board Ideas of Interaction

REGULATORY COMPLIANCE ............................................................................................................ 75

Important Information

NOTE: If you a re a NHBoard touch sensitive whiteboard user, refer to the rele vant w arnings and

maintenance instructions in this user’s manual.

Before you ins tall and use the NHBoard series interactive w hiteboard system, please read and have a good

understand of the safety warnings and precautions in this guide. By reading these safety warnings and

precaution, users can get a good understand of the no te items of the whiteboard and its accessories, which

can prevent injuries and equipment damage due to misoperations.

All the safety cautions in this file are spe cific to the interactive w hiteboard, projector, accessories and other

periphera l equipments.

Safety Warnings

WARNING

Do not stare into the beam of light created by the projector.

WARNING

Ensure that any cables extending across the floor to your NHBoard products are

prope rly bundled and marked to avoid a trip hazard.

WARNING

To reduce the risk of fire or electric shock, do not expose the NHBoard interactive

whiteboard to rain or moisture.

WARNING

Two people are required to mount the interactive whiteboard on a wall because it

may be too hea vy for one person to mane uver onto the wall-mounting bracket.

WARNING

Move a floor stand-mounted NHBoard interactive whiteboard with care . Quick stops,

excessive force and uneven surfaces may cause the product to overturn. Before

moving a floor stand, make sure the anti-tip feet are retracted or locked in the up

WARNING

Do not stand (or allow children to stand) on a chair to touch the surface of your

NHBoard product. Rather, wa ll-mount the product at the appropriate height or use

a NHBoard height-adjustable floor stand.

Installation and User Guide of Board Ideas of Interaction

Other Precautions

To ensure operating safely and to avoid product damage, obse rve the following

precautions.

1. Avoid setting up a nd using the interactive whiteboard in an area with e xcessive le vels o f dust, humidity

and smoke.

2 .Don’t add any extra weight or excessive pressure to a interactive whiteboard or the mobile flo or stand.

3. Please package your Interactive whiteboard before shipmen and keep the interactive w hiteboard upright.

Please use suitable package if your original package was broken or ask us for a new package.

Cleaning the Interactive Whiteboard Surface

Please cut off the electricity and make sure that the interactive whiteboard was closed before yo u cle an it,

or the program will be run when you are cleaning. You should clean a frequently used interactive

whiteboard approximately once a week to maintain optimal clarity.

Generally spea king, please use wet cloth to clean the surface of interactive whiteboard, clean the stain

lightly until the stain disappear; If there are oil spo ts or stain which is not eas y to clean, please spray the

dete rgent on the surface of interactive whiteboard, wait for a moment, then use a wet clo th to wipe in the

same direction until the spots disappear.

Preventing Damage to the Writing Surface

Please don’t use ball pen or fountain pen to write on the surface of interactive whiteboard and don’t use a

hard erase r to clean the whiteboard, as sharp and hard objects will damage the surface and the writing

trace is not easy to clean.

Installation and User Guide of Board Ideas of Interaction

Brief introduction of NHBoard

The NHBoard TGN and TGU Series products are a touch sensitive, front projection interactive whiteboard

that e nables you to do everything you can do a t a computer workstation —open files, conference with others,

work on documents, visit websites, play video and more—simply by touching the screen. You can also write

over any application with your finger, and then save these notes to a NHBoard-T file for future reference

and distribution

Features& Highlights

The NHBoard TGN and TGU series interactive whiteboards include many features of previous interactive

whiteboards, such as ana log resistive touch screens. Although the basic operation is the same, NANHAO

(Beijing) Science and Technology Co., Ltd. has made many improve ments to make the TGN series look

more up-to -date, and easier to use, se rvice a nd install. Fo llowing models a re available: the TGN50/TGU50,

TGN70/TGU70, TGN83/TGU83, TGN100/TGU100 and TGN115/TGU115, which are 48", 64", 78", 95" and

110" respectively, measured diagonally.

 Touch sensitive

technology

 Durable surface

 Wall-mount bracket

 Standard USB cable

 Floor stands (optional)

Performing mouse functions with your finger, users can write,

erase freely on the surface of whiteboard.

The hard-coated polyester surface is tear pro of, optimized for

projection, compatible with dry-erase markers and easily

cleaned w ith whiteboa rd cleaner.

Install your NHBoard interactive whiteboard simply and

securely.

Connect the NHBoard interactive whiteboard with your

computer with 10 m USB cable and connect computer w ith

projector w ith 25 m USB cable(optional).

Mobile, height-adjustable floor stand that includes heavy

duty, locking casters and flip-down anti-tip feet

Installation and User Guide of Board Ideas of Interaction

How Does NHBoard Work?

This chapter help you to get a good understand of NHBoard to uch sensitive whiteboard. The touch sensitive

interactive w hiteboard as a n input and output device of PC, just like a mouse. help users to operate the PC

with your finger. W hen users touch the interactive whiteboard's surface, the interactive whiteboard detects

the touch points in short time and the driver will receive the signal instantly and convey to the PC screen.

Projected Mode

Using the NHBoard interactive w hiteboard in Projected o r Mouse mode, two additional components is neede:

a PC and a projecto r.

These components work together as follows:

 The computer send the image of screen to the projector.  The proje ctor projects the image onto the surface of interactive whiteboa rd.  The interactive whiteboard acts as both the monitor a nd the input devices (mouse and keyboard),

users can control the computer by touching the surface of interactive whiteboa rd with their finger.

When the application software was opened in projected mode, the touch of your finger on the screen

becomes a mo use click, allowing you to run the computer right from the interactive whiteboard’s s urface.

You can also use a stylus to write over any open application, and then save the notes in a ce rtain file.

Non-Projected Mode

In the Non-Projected mode, turn off the projector, users can finish many operations with our software in

the computer. Such as: Screen capture, save, print and so on.

Installing and Setting up NHBoard

Environmental requirements

Before installing your NHBoard interactive whiteboard, review the following environmental requirements.

Temperature

NHBoard s can be used in the temperature range of -15°C to 50°C. In addition, the product can withstand

storage temperatures from -40°C to 50°C.

Humidity

NHBoard intera ctive whiteboards can be used between 20 % and 90% relative humidity non-condensing.

Humidity above 90% might cause slight wrinkling on the surface. The wrinkles will disappear once the

humidity is lowered.

Keep Away from Water and Fluid

Installation and User Guide of Board Ideas of Interaction

Please make sure that to install and use the NHBoard interactive whiteboards indoor and do not pour or

spray any alkaline liquids directly onto the interactive whiteboard or any of its sub-components. These

liquids might get into areas where they could damage resistive electronic components.

Keep Away from Dust and Scratching

NHBoard interactive w hiteboards are for use in office and classroom environments and are not for industrial use where heavy dust and pollutants can cause malfunctions or impaired operation.

Electrostatic Discharge (ESD)

NHBoard intera ctive whiteboards meet the requirements of EN61000-4-2 se verity level 4 for direct and indirect ESD. No malfunction or damage up to 15kV (both polarities) with a 330 ohm, 150 pF probe (air discharge). Un-mated connectors meet 8kV for direct (contact) discharge.

Wall-Mounting Instruction

To avo id crash and friction, two persons are needed to install the interactive whiteboard.

Don’t leave cables on the floor in case of stumble. If the cables can only be left on the floor, users have to

straighten them, wrap them with warning insulating tape or fix the m.

The following procedures illustrate the mounting of the NHBoard interactive whiteboards onto a wall.

Accessories for Wall-Mounting procedures

Name

Quantity

Picture

L-shaped metal bracket-right side

L-shaped metal bracket-left side

Expansion bolt

2 4

Swell plug

Self-tapping screw

There are four sets of foams on the four sides

of whiteboard, the foams contain corner

protection foams and cover foams. Users w ill

find the product’s Installation and Use r

Manual, USB Cable , Whiteboard Pens,

Warranty Card, Software CD, Expansion

Bolts, Inner Hex Head Screwdriver in one of

the corner protection foams. Certainly, two

sides (up-down) foam have been des igned to

make a maximum protection from any

unexpected impact or friction during the

transportation process.

Installation and User Guide of Board Ideas of Interaction

wall mounting procedure

1. Fetch the interactive whiteboard

from the package

2. Uns crew the four sets of inner

hex head screws and its cushions

from quadrate tube bracket

3. Uns crew the four sets of bolts

and its nuts of the L-shaped

metal bracket

4. To mount the quadrate tube

bracket on the TGN series

interactive whiteboard by

screwing the above mentioned

inner he x head screws M6×16.

5. Set up the two Expansion Bolts

and make sure 1190mm

distance remain between these

two L-shaped metal brackets,

1775mm height distance from

floor to the top-fixed Expansion

Bolt, marked the right positions

with pencil.

6. Drill 70mm hole on the wall with

percussion drill 12mm, and

position the Expansion Bolt into

the hole, strengthen and fasten

them.

7. Uns crew nuts of the above

Expansion Bolts, temporarily

hang the two L-shaped metal

brackets on them, screw and

fasten the nuts.

8. The illustration on the right

shows the common heights of

300mm for adjusting when you

finished steps 3 and attach the

back of Interactive Whiteboard

upon the L-shaped metal

brackets

Installation and User Guide of Board Ideas of Interaction

Please Note:

Do not hammer the above mentioned expansion bolts and swell

plug into the wall forcibly.

If s ome parts of the wall(concentrate w all o r brick wall) is too hard to drill,

please don’t drill forcibly, please change other position. Please choose

suitable wall to install the interactive whiteboard.

Technically, select the optimal wall mounting space according to

the products mode

In the process of wall mounting, please pay attention that the space

between two L-shape metal brackets are various depending on the

products model you have, below date allow you to make reference.

Mounting on a Floor Stand

Accessory list

 L-shaped metal bracket  Horizontal knighthead  Vertical knighthead  Caster  Horizontal frame  Hexagon screw

Products model

Horizontal space: L（mm）

Vertical space: H（ mm）

Distance to upper

swell plug

Distance to lower

swell plug

TGN70\TGU70

1190

1775

550

TGN83\TGU83

1190

1775

550

TGN100\TGU100

1727

1775

550

TGN115\TGU115

1727

1775

550

Installation and User Guide of Board Ideas of Interaction

 Bolt M6×45  Cushion  Inner hexagon spanner

1. Lock all four caste rs firstly

3. Use the provided hex key to

make sure that all screws in the

floor stand are tight.

2. Partially screw two of the bolts

provided into the top ho les in the

rear of the interactive

whiteboard leaving a certain

space between the bolt heads

and the surface.

Installation and User Guide of Board Ideas of Interaction

NHBoard Touch Sensitive Whiteboard Mounting Instruction

You can use floor stand FS-A601 with the NHBoard s except TGN50/TGU50. Due to the small size of

TGN50/TGU50 , we provide with two mounting ways for choosing, one is wall mounting like other models

of NHBoard TGN/TGU series, and the others is table mounting method by which you can mount the TGN50

along the side of table. The illustration below shows the mounting procedures for TGN50.

Wall mounting procedures

1. Fetch the TGN50 series

interactive whiteboard from the

package

2. Uns crew the four set of inner hex

head screws and its cushions of

quadrate tube bracket

3. Uns crew the four sets of bolts

and its nuts of the L-shaped

metal bracket

4. To mount the quadrate tube

bracket on the TGN50 interactive

4 With an assistant’s help, hang the

interactive whiteboard on the floor

stand, and fasten 4 of the hexagon

screws with provided hex

screwdriver.

Installation and User Guide of Board Ideas of Interaction

Table mounting procedures

Accessory list

 Vertical mounting bracket  Bevel edge lever  Bottom bracket  Horizontal bar

5. Set up the four Expansion Bolts

and make sure 775mm distance

remain between these two

L-shaped metal brackets,

1600mm height distance from

floor to the top-fixed Expansion

Bolt, marked the right positions

with pencil.

6. Drill 50mm hole on the wall w ith

percussion drill 10mm, and

position the Expansion Bolt into

the hole, strengthen and fasten

them.

7. The illustration on the right shows

the common heights of 160mm

for adjusting when you finished

above steps and attach the back

of TGN50 Interactive Whiteboard

upon the L-shaped me tal bra ckets

Installation and User Guide of Board Ideas of Interaction

 Inner hexagon spanner  Bolt M6×45

 Cushion  Spring cushion  M6 inner hexagon nut

Please keep below order correctly when you complete the whole process of Table mounting:

Assemble the Vertical mounting bra cket, Bottom bracket and Bevel edge lever as two free parts, and then

mount the TGN50 upon the table when you finish installing the Horizontal bar. Below pictures indicate the

right position for the whole accessories.

Installation and User Guide of Board Ideas of Interaction

Software Installation

Software Requirements

Microsoft Windows2000 or later, including Windows 2000, Windows XP Windows Vista and Windows 7.

Hardware Requirements

 Minimum required configuration system

CPU: P Ⅲ800; Memory: 128M; Hard disk: 20G; Graphic card memory: 32M; USB interface

 Recomme nded system configuration

CPU P4 2.4G; Memory: 512M; Hard disk: 80G; Graphic card memory: 128M; USB interface

Notice:

Please install all the related software successfully to make sure this software can work

norma lly following the below installation Steps:

 Please insert the NHBoard setup disc contained in product package into your C D-ROM driver after

you started your computer and operation system.

 Normally, setup program w ill sta rt automatically. If it does not start automatically, double-click

the CD-ROM icon on your computer to open CD-ROM folder, and then double-click the setup file

to run it manually.

 The setup application will set the default language according to your operating system.

Installation

Attention:

Do not connect cable before software installation. Some functions are subject to the restrictions of the

operating system.

Please follow up below procedure to completely install the NHBoard interactive whiteboard

software into your computer before you make any application upon the NHBoard Interactive

Whiteboard.

Installation and User Guide of Board Ideas of Interaction

Step 1: Start automatically

Step 4: se lect the complete

option typically or change the

destination for set up. Click next

step for go on.

Step 3: Type your user name

and organization and select the

―Install this application for‖ any

one or only you.

Step 2: Select the ―I accept the

terms in the license agreement‖

option to continue.

Installation and User Guide of Board Ideas of Interaction

Connection Cable

For the interactive whiteboa rd connection, one USB cable is ok, the users

just connect the USB ca ble with the computer and interactive whiteboard,

don’t need extra power supply. There is no extra power supply required

for this product. The indicator of the interactive whiteboard will become

green after the successful connection. If the indicator doesn’t shine, it

shows that there is no connection of the cable. If the indica tor is red, there

is unsteady connection of the cable. Double-click the icon ―NHBoard –T‖ to

activate the tools.

Step 5: Installation process

Step 6: Click finish for complete

the whole installation

procedures.

Step 4: Select the complete

option typically or change the

destination for set up. Click next

step to go on.

Installation and User Guide of Board Ideas of Interaction

Calibration

The users have to ‖calibrate‖ in their first time of using the interactive whiteboard in order to control the

computer accurately. Users don’t need to calibrate in following times if the position of the interactive

whiteboard and projector didn’t change, users have to calibrate in this case of positions and resolution of

computer and projector changed.

Although a default calibration is automatically assigned to users’ interactive whiteboard, we recommend

that users complete the calibration proce ss by themseves to ens ure the greatest level of tra cking precision.

Users may also want to re-calibration on occasion, especially if the interactive whiteboard is accidentally

jostled and the projected image becomes misa ligned. After the correct calibration, the curso r will appear

directly beneath your fingertip, and tra ck finger closely o r tool contact made anywhere on the NHBoard

interactive whiteboard surface. After the connection among your PC, the interactive white board, and the

projector (complete installation of NHBoard-T V3.1 software), select the ―Adjust‖ option at the bottom right

corner of NHBoard interactive whiteboard to activate it.

The calibration process is a simple procedure of clicking 9 points ― ‖ on the whiteboard with your finger

or stylus one by one (While calibrating, ma ke sure your finger tip be ve rtical to the whiteboard, a nd resta rt

the position if the click is w rong). You can exit the calibration by pressing the ―Esc‖.

Press firmly in the small yellow square in the center of each Red Cross that appears in the orientation

screen. If you neglect to do this, the NHBoard-T V3.1 driver w ill not track your finger or stylus tool correctly.

If you want to redo the entire orientation procedure, press the Esc key on the keyboard.

Using in guide

NHBoard-T V 3.1 Toolboxes

As you explore NHBoard-T V3.1, you’ll encounter a range of toolboxes. Each toolbox has its diffe rent

purpose, enabling you to acce ss key editing functions or specific fea tures. In this part, we’ll introduce you

to ea ch of the NHBoard-T V3.1 too lboxes.

1. Home Toolbox

2. View Toolbox

3. Insert Toolbox

4. Screen Toolbox

Installation and User Guide of Board Ideas of Interaction

About the Home Toolbox

The Home toolbox show the first step as well as the most frequently used application function contains a

wide range of tools for writing, selecting erasing or copy, paste, cut, delete and manipulating objects in

your Flipcharts.

Operation

Marquee Select Tool

Click an object to select it, or click and drag to select multiple objects; selected objects can be

edited, moved and manipulated.

Pen

Pen Tool

Annotate, write or draw on your Flipchart page with this normal pen tool.

Pencil Tool

Write, note and mark in the way like pencil function.

Brush Pen Tool

Write, note and mark like you are using the brush.

Washing Pen Tool

Give emphasis to text, annotations and images with a tra nsparent washing pen.

Line Height Tool

Click to select the different height for Pen, Pencil, Brush pen and Washing Pen.

Eraser

Circle Eraser

Use to delete object on the Flipchart with circle are a.

Rectangle Eraser

Use to delete object on the Flipchart with rectangle area.

Object Eraser

Use to delete object itself on the Flipchart.

Frame Eraser

Use to delete object which be selected by dragging rectangle with your left mouse on Flipchart.

Random Eraser

Use to delete object which be selected by drawing randomly shape on Flipchart.

Installation and User Guide of Board Ideas of Interaction

Full Eraser

Use to delete object on Flipchart all by once.

Copy Tool

Copy the object or content which been selected, so you can paste them on Flipchart later.

Cut Tool

Remove the current object or content on Flipchart, so you can paste them on the Flipchart later.

Paste Tool

Paste the certain object or content which been copied or cut to anywhere on the Flipchart.

Delete Tool

Delete the selected object or content.

Format

Fill Tool

Use to fill with color, transparent, picture and texture of your choice in the object which has been

selected.

Figure Tool

Use to change the properties including color, transparent, line height and dash style of your

choice

Align Tool

Use to change the view perspective including align object, group object and rotate object of your

choice

Installation and User Guide of Board Ideas of Interaction

About the View Toolbox

The View Toolbox provides you with a special range of tools to assist in the organization and navigation of

your flipcha rts.

Operation

Marquee Select Tool

Click an object to select it, or click and drag to select multiple objects; selected objects can be

edited, moved and manipulated.

Page

Page Top

Click for rolling to the first page you created.

Page Bottom

Click for rolling to the last page you created.

Page Up

Previous Page Moves back one page in the current application.

Page Down

Moves ahead one page in the current application.

Cruise Restore Page

Go back to the position where you drag the page.

Drag Pa ge

Click to drag the whole page to anywhere you desire.

Zoom

Zoom Rate

Click to choose your preferable view ration.

Zoom In

Click for zoom in.

Zoom Out

Click for zoom out.

Restore Zoom

Go back to the original size of your annotation and drawing.

Installation and User Guide of Board Ideas of Interaction

About the Insert Toolbox

The Insert Toolbox is a multi-media function tools pool, allow you to insert lots of many applications

including table, picture, shape, chart, hyperlink, textbox, video, music, flash.

Operation

Marquee Select Tool

Click an object to select it, or click and drag to select multiple objects; selected objects can

be edited, moved and manipulated.

Table

Insert Table

Click and drag mouse or your finger within the table frame to select row and column; click

and drag on your flipchart to create table with default color of red.

Illustration

Insert Picture

Insert picture with the format including “bmp, wmf, dib, jpeg.” from your computer disk .

Insert Shape

Click to choose the shape in the pop down palette, and inse rt in the page.

Insert Chart

Click to insert chart, input X and Y –axis valid value .

Link

Hyperlink

Click to insert any kind format of document into current page, open by double clicking.

Font

Insert Textbox

Click to insert one textbox into current page, then you can input word by ty ping screen

keyboard or handwriting recognition.

Media

Insert Video

Click to insert video from your computer disk.

Insert Music

Click to insert music from your computer disk.

Insert Flash

Click to insert Flash from your computer disk.

Installation and User Guide of Board Ideas of Interaction

About the Screen Toolbox

In Screen toolbox, you will find some of tools designed to help you make application on screen, such as

focus on certain area, capture window or whole screen, record screen, black screen and so on. To choose

the correct screen tool can definitely enhance your presentation performance.

Operation

Marquee Select Tool

Click an object to select it, or click and drag to select multiple objects; selected objects can

be edited, moved and manipulated.

Handwriting

Writing Recognize

Recognize and convert freehand writing into editable text.

Demo T ools

Spotlight

Click to focus on a specified spotlight area.

Close Curtain

Click to present with a mask covering, drag the bar to up-down or right-left.

Highlight Screen

Click to black screen, but can draw any size as highlight area.

Black Screen

Switch from black screen to current page by click and click again

Floating Palette

Click to floats over all applications and allows you to change the shape of floating tool.

Mark Tools

Right angle-triangle

Click to insert Right angle-triangle, drag to anywhere and any size within the flipchart.

Right angle-triangle 30 de gree

Click to insert 30 degree Right angle-triangle, drag to anywhere and any size within the

flipchart.

Size measurement

Click and draw line with size data measurement

Degree measurement

Click to draw degree with degree data measurement

Ruler

Launch a graduated, re-sizable on screen ruler.

Compass

Draw the circle with any degree.

Installation and User Guide of Board Ideas of Interaction

Angle Finder

Play the role as protractor, drag to anywhere and any size within the flipchart.

Screen

Tools

Capture Screen

Click to capture the live window, full screen, rectangle or random area.

Record Screen

Launch the recorder to record all action performed on flipchart page and save as “avi” video

formats then you can play them back as animation.

Special

Tools

Calculator

Launch a on-scre en calculator

Zoom In

Magnify the object on the flipchart page.

Clock

Display a clock on the screen, and disappear by click again.

Keyboard

Launch an on-screen keyboard on the screen and disappear by click again.

About the Floating Tool Palette

Floating Toolbox

The Main toolbox can be minimized or moved around the screen. It also floats on top of other running

Windows applications, allowing you to use the features of NHBoard-T V3.1 in conjunction w ith other

softw are.

The Floating Tools pa lette is a portable, customizable set of tools that floats over all applications and allows

you to perform a wide variety of operations. With the Floating Tools open, you have access to a virtual

version of the pen tray tools. Press the Pen button, for example, and your ne xt contact with the interactive

whiteboard produces electronic ink. In a ddition, the de fault Floating Too ls palette includes a number of

tools you won’t find in your pen tray, such as tools for producing a right-mouse click, creating geometric

shapes, displaying a large pointer, producing a spotlight, capturing your annotations and restoring cleared

annotations. You can edit the default palette of tools or save your customized pale tte in a use r profile that

you activate each time you use the interactive whiteboard.

Installation and User Guide of Board Ideas of Interaction

NHBoard-T V3.1 Tutorial

About Tutorial

This training manual has been developed to introduce the main fea tures o f NHBoard-T V3.1 in a structured

way. Although confident computer users are encouraged to delve in and experiment for themselves, this

manual has been designed to help ill in the gaps missed by experimentation alone. Less confident computer

users, in the meantime, can use the manual to learn the software from scratch. When you have completed

all Seventeen tutorials yo u will be able to produce exciting, interactive Flipcha rts and hopefully, the manual

will give you the confidence to go on and explore further.

What is NHBoard-T V3.1 Flipchart?

‘Flipchart’ is the name we give to an NHBoard-T V3.1 presentation. Like a tra ditional paper-based flipchart,

a NHBoard-T V3.1 Flipcha rt can contain as many pages as you w ish to create. However, unlike a traditional

Installation and User Guide of Board Ideas of Interaction

Flipchart, your NHBoard-T V3.1 Flipcharts can contain much more than just notes and images. You can

incorporate a number o f different media forms into your Flipcharts including sound files , videos, animations,

interactive activities and web-links–and the e xtensive Resource Library is full of items for you to use if yo u

don’t have the time to source your own.

The only real limit is your own imagination!

Tutorial One--- Pen, Eraser, Clipboard

Launchi ng NHBoard-T V3.1 for the first time

Create a new page

Using the Pen tools

Selecting and editing multiple objects

Using the Eraser tools

Using Clipboard tools

Changing format

Changing background color

Launching NHBoard-T V3.1 for the first time

To launch NHBoard-T V3.1, double-click the icon on your desktop or find NHBoard-T V3.1 v ia the start menu.

Tutorial One

Tutorial Tw o

Tutorial Three

Tutorial Four

Tutorial Five

Tutorial Six

Tutorial Seven

Tutorial Eight

Tutorial Nine

Tutorial Ten

Tutorial Eleven

Tutorial Tw elve

Tutorial Thirteen

Tutorial Fourteen

Tutorial Fifteen

Tutorial Sixteen

Pen, Eraser, Clipboard

Format

Page and View

Table, Picture , and Shape

Resources Gallery

Chart

Textbox

Video, Music, Flash

Handwriting Recognition

Word/Excel/PowerPoint application

Screen Tools

Mark Tools

Screen Capture, Recorder Video Player

Calculator, Clock and Screen keyboard

Customization

Style and UI language change

Installation and User Guide of Board Ideas of Interaction

We strongly recommend you to launch the Floating Tools palette when start the software for the first time.

Because, Floating Tools palette w ill definitely help you to a ccess mo re useful function application, es pecially

under projection model.

1. Double click NHBoard V3.1 icon on the des ktop for start running.

2. Turn to Screen Toolbox and click Floating Tools

Creating a new page

As default, NHBoard-T V3.1 will create the first flipchart page when you start running, go to the thumbnail

window and lock it for view. There are two main methods for you to create the new flipchart page.

1. Under the first page, you can right click on the blank area to create the second new flipchart page

2. You may find a small down arrow at the right top corner of your first flipchart page, left click it and

choose ―New‖ for creating the new flipchart page.

Installation and User Guide of Board Ideas of Interaction

Using the Pen Tools

Before attempting a nything too adventurous, it’s worth getting to grips with the basic tools and functions.

Most of these can be accessed through the Floating palette.

Start an application on your projected interactive whiteboard; select any kind of color styluses from the

color palette (red as default), and w rite in the color you selected. Please note that you’re writing in virtual,

electronic ink rather than physical ink.

To write in a different color

Installation and User Guide of Board Ideas of Interaction

NHBoard-T V3.1 also provide other kinds of pen functions including Pencil, Brush Pen, a nd Washing Pen, to

change their attribute; you can also do the same way as above mentioned.

To write in a different line height

To write in a different dash style

Installation and User Guide of Board Ideas of Interaction

Tips:

You can also change the pen color, line height or dash style by left clicking it on Floating Tools palette.

NHBoard-T V3.1 Floating Tools palette concentrates more attributes properties all in one icon to minimize

the space. User can single left click to use it or left click for hold on one second and release to change its

prope rties, w hich you can access to complete in main software tools bar.

You can find there are so many such likely actions available on the tools bar, you just need to left click on

the function icon and ho ld on one second then release, some pop out menu will indicate you to move

forward.

Selecting and editing multiple objects

Select the Mouse operation tool , and ―click and drag‖ over all objects.

Installation and User Guide of Board Ideas of Interaction

How to click and drag

1. Click on the page, to the top-left of the items you want to select.

2. Hold the mouse button / your finger tip down a nd move diagonally to the bottom right of all the objects

you want to select.

3. Let go of the mouse button or release your finger tip from the board. 3 Pick-up Boxes will surround the items, showing that they have been selected.

Select a different color and pen height. Any changes you make will now be applied to all the letters.

4 Left click on each of the right top corner, choose ―Group‖ option, then all items selected will be

integrated as one object. You can also to choose ―Cancel Group‖ to live the individual items again. .

You can then individually se lect and modify, move, delete or resize each object.

 Don’t worry about making mistakes at this stage as most changes made in NHBoard-T V3.1 can be

reversed.

 One click on the Undo o r Redo tool reverses your last action – try this now. Each click reverses

a further edit so it’s possible to undo or redo to the point where you first opened the Flipchart.

Using the Eraser tools

To erase what you have written, just choose one certain size eraser from the Home Toolbox or Floating

tools pa lette. If you are pre fer to erase all the content at once, NHBoard-T V3.1 provides w ith the full s creen

erase function application which means the whole screen clean application.

To erase freehand writing

1. Left click to select right size eraser

Installation and User Guide of Board Ideas of Interaction

2. Click and drag on the ite m which you want to delete.

Changing background color

Right click on the any blank area in flipchart page to choose Set Background Color option to select the

preferable color type for change.

Tutorial Two--- Format

Drawing two different graphic

Using Fill tools

Using Figure tools

Using Align tools

Drawing two different graphics

Choosing the gra phic which you de s ire to create, click and drag o n the flipchart page to the proper size and

release. As default, all the gra phics you create firstly w ill be presented w ith the same border color (red) and

same line width.

Installation and User Guide of Board Ideas of Interaction

Using Fill tools

1. Select any of the abo ve graphic

2. Change color

3. Cha nge transparent

4. Fill with Picture

5. Fill with Texture

Using Figure tools

1. Select any of the abo ve graphic

2. Change color

3. Change transparent

4. Change Line Height

5. Change Dash Style

Using Align tools

1. Move one of the graphics you created on the top of another one.

2. Select Align button for changing layer order.

3. Select Group option to group or un-group items

4. Select Rotate option for rotating items as vertical of horizontal

Installation and User Guide of Board Ideas of Interaction

Tutorial Three--- Page and View

Page tools instruction

Understanding and using Cruise function

Using Zoom tools

Page tools instruction

NHBoard-T V3.1 allow you, w ith a large e xtent, to view all o f flipchart pages you create as a very convenient,

quickly method, sw itch from top page to bottom page , or go to next and ba ck to previous page. This is very

useful when so many pages involved.

1. Open the thumbnail window, and lock it

2. Select Top page

3. Select Bottom page

4. Select previous page

5. Select next page

Tip 2:

You can click any page in the thumbnail window, drag upwa rd or downward to any page position you want

and release it, the page will be added and appear a t the new position.

Installation and User Guide of Board Ideas of Interaction

Understanding and using Cruise function

The Cruise function is one special presentation tool, you can use the cruise to move the whole content

on flipchart page to anywhere, please note, in case of cruise function used, the flipchart is a virtual

unlimited area, all the contents, items, e lements o n page w ill be automatically lock as whole object. Of you

want find the contents, items, elements again after several time dragging move, follow two ways:

1. Use the Restore button

2. Change the Zoom Rate

Please note, by changing the Zoom Rate, it is just re -load the present percentage as a small scale, only in

this way, you can drag back very easily what you created.

Using Zoom tools

1. Change the Zoom Rate

2. Zoom in

3. Zoom out

4. Restore

Tutorial Four--- Table, Picture, and Shape

Using Table tools

Inserting picture

Creating a flowchart

Using Table tools

This Table tools can help you to create any 8 rows and 10 columns by clicking and dragging.

1. Click the Table tools button

2. Put your mouse or finger on the pop down table palette, and click and drag, you can find the number

of row and columns changing automatically; stop dragging when you are satisfied with the number of

row and columns

3. Move your mouse or finger on the flipchart page, click and draw from the top right corner diagonally.

4. The table size depend on the diagonal length you drag

5. Release when you are satisfied with the table size.

Please note:

 You can also change the tab le border color and line width in the Align menu function palette.

Installation and User Guide of Board Ideas of Interaction

 You can also type words in every grid of table just by double click any of the grid, the mouse curse

bicker means that it is ready fo r inputting word. Of course, you can insert content by co py and paste

from other third parties software such as Microsoft Office.

 Every grid can be re-sizeable by dragging the right-down handle.

Each word inputted in the grid can be re -editable easily

1. Launch the Text too lbox

2. Choosing the right size

3. Choosing the right font

4. Choosing the right color

Inserting picture

NHBoard-T V3.1 suppo rts you to inse rt most kinds of picture format from your computer disk to flipchart

page, accepted format including ―bmp, wmf,dib,jpg,jpeg‖ and so on.

It is very easy to insert picture, just by clicking button, then one dialog box pop out to remind you

which picture you want to insert, choose the right picture take the new name for it and click ―OK‖.

Installation and User Guide of Board Ideas of Interaction

Creating a flowchart

A flow chart is a co mmon type of diagram, w hich re presents an algorithm or process, showing the steps as

boxes of various kinds, a nd their order by connecting these with a rrows. Flowcharts are used in analyzing,

designing, documenting or managing a process or program in various fields.

A typical flowchart from olde r Computer Science textbooks may have the following kinds of symbols:

 Start and end symbols  Arrows  Process ing steps  Input /Output  Conditional or decision

A number of other symbols that have less universal currency, such as:

 A Document represented as a rectangle with a wavy base;  A Manual input represented by parallelogram, with the top irregularly sloping up from left to right.

An example would be to signify data-entry from a form;

 A parallelogram indicate operation or judgment conditions .  Data are represented by a histogram.

Flowcharts may contain other symbols, for example, connector is represented by a circle, which is usually

pointed by some arrows. Among the arrows, only one point outward. Some flowcharts only use one arrow

pointing to another, which represent repeated actions. It is called loop in computer science. For example,

a loop graph includes a connector, processing steps, a condition for exiting the loop and arrows.

NHBoard-T V3.1 offer users many shapes for all kinds of flowchart.

1. Click button to a ctive Chart function, choose proper shape by single clicking on it.

2. Use the Fill function in Home Toolbox to change each shape’s border color and filled color or border

width.

3. Use arrow shape for direction indication

Installation and User Guide of Board Ideas of Interaction

4. Use Textbox to type or w rite letters.

Tutorial Five--- Resources Gallery

NHBoard-T V3.1 ow ns huge resources. We ’ll introduce how to use the resource gallery in this chapter. The

button is designed at the left of the user interface .

Opening a previously saved Flipchart page

Accessing the resources gallery

Using the Resources Tree to view resources

Creating new and rena ming the current resources file

File Manager instruction

Opening a previously saved Flipchart page

1. Using open function to open archived flipcha rt

2. Using Floating tools palette to open archived flipchart

Installation and User Guide of Board Ideas of Interaction

Accessing the resources gallery

Selecting current page, then opening resources gallery to inse rt pictures or others files. All files inserted can

be re -edited, zoomed in, zoomed out, rotated and deleted.

1. Open resources gallery by clicking button

2. Select catalogue

3. Select picture

4. Click and drag to flipchart page

5. Re-edit picture

Installation and User Guide of Board Ideas of Interaction

Using the Resources Tree to view resources

Clicking the resources gallery button .Selecting the resources catalogue.

Creating new and renaming the current resources file

 New: creating one new folder, fill with new name

in the pop out box.

 Delete: single clicking the folder you se lected,

selecting delete in the drop dow n list. This action

will delete all the contents included in the folder.

 Rename: single clicking the folder to be renamed,

selecting rename in the drop down list.

 Refresh: s ingle clicking the folder to be refreshed,

selecting re fresh in the drop down list, to help you

get back to the beginning point.

 Import Files : import pictures from yo ur compute r

disk individually.

 Import Directory: import file by batch.

File Manager Instruction

Users can open all files in the computer without close the software or minimize the w indow . You can browse

all files in your computer by clicking button on the left side of main NHBoard-T V3.1 windows. The

entire file will appear in the adjacent thumbnail panel.

Tutorial Six--- Chart

We will show you how to set up the Chart in this chapter. The chart function is similar with functions in

Microsoft Excel, as easy as just imputing number, renaming and save as a new file, then exporting as

documents of other formats.

Installation and User Guide of Board Ideas of Interaction

Understanding Chart function

Creating Chart

Using the Chart properties

Inserting and re-editing Chart properties

Understanding Chart function

A chart is a visual representation of data, in which "the data are represented by symbols, such as bars in

a bar chart, lines in a line chart, or slices in a pie chart". A chart can represent tabular numeric data,

functions or some kinds of qualitative structures.

NHBoard-T V3.1 allows you to create a cha rt through various methods.

This chart gallery is as follows,

 A bar chart shows frequencies or values for different categories.  A pie chart shows percentage values as a slice of a pie.  A line chart shows data trend during from different times.

Creating Chart

Launching the Chart function by clicking button,

1. Title: create the chart name by typing

2. X-axis Name: Type a name for X-axis

3. Y- axis Name: Type a name for Y-axis

4. Chart Type: Choose the Chart type ranging from Bar, Line, P ie, Scatte r, Box, Bar Stacke d, Line XY, to

Bar 3D, Line 3D,Pie 3D and Bar Stacked 3.

Installation and User Guide of Board Ideas of Interaction

Take an example; you can create a chart with below data information.

 Title: China National Population

 X-axis Name: Year

 Y- axis Name: Statistical Catalogue

1978

1991

1996

2001

2003

Male

49567

59466

62200

65672

66556

Female

46692

56357

60189

61955

62671

City

17245

31203

37304

48064

52376

Urban

79014

84620

85085

79563

76851

Total

96259

115823

122389

127627

129227

Data sourc es from China St atis tical Yearbook 2008, (10 000 p ers ons )

Installation and User Guide of Board Ideas of Interaction

Type: Bar Type: Line

Installation and User Guide of Board Ideas of Interaction

Type: Bar 3D Type : Line 3D

You can double click on the inserted chart, and re-e dit it again.

Tutorial Seven--- Textbox

Launching Textbox and Inputting word

Editing the content in Textbox

Zoom in/out, rotate Textbox

Launching Textbox and inputting word

By clicking button to launch Textbox tool, each of the textbox has bee n defined as the same w idth and

length, click in the te xtbox rectangle area to input word when mouse cursor in the active state.

There are four ways to input w ord or letter.

1. Type from computer keyboard

2. Type from screen keyboard

3. Input by free handwriting recognition

4. Input by paste from other place

Installation and User Guide of Board Ideas of Interaction

Please refer to Tutorial Nine for free handwriting recognition.

Editing the content in Textbox

After finishing the input, in NHBoard-T V3.1 ,words can be edited as the following procedures,

1. Double click the Textbox and active the window.

2. selecting the content to be edited

3. Use Font palette to edit the content

Installation and User Guide of Board Ideas of Interaction

Zoom in/out, rotate Textbox

1. Take the bottom green circle handle to rotate

2. Drag the red circle handle, at down right corner for zoom in / out.

3. Click the top right corner ―hand shape‖ button fo r right mouse function

 Don’t worry about making mistakes at this stage as most changes made in NHBoard-T V3.1 can be

reversed.

 One click on the Undo or Redo tool reverses your last action.

Tutorial Eight--- Video, Music, Flash

Using Hyperlink to link video, music and flash file

Opening linked file.

Using Hyperlink to link video, music and flash file To make your

presentation and class teaching more vivid, probably you should add the sound and animation into the

courseware, and you can do it by completing hyperlink function through NHBoard -T V3.1, below we show

you how to get it done.

To link an object

1. Select the te xt or graphic that you want to link.

2. Click the top right corner, the small hand shape handle to active right mouse function.

3. Select Hyperlink from the right mouse drop down menu.

4. Insert Hyperlink dialog box.

5. Select the file or video which you want to link and click OK.

Installation and User Guide of Board Ideas of Interaction

A black curved arrow appears in the bottom left corner of the selected text or image, which means the

objected has been selected successfully.

Opening linked file.

To open the linked file, you need to click on the obje ct (see above yellow smile face), and hold your mouse

on for one second or longer then release. The linked file will open automatically, please note, in this way to

open the linked file, it will not change the file format.

To stop playing, close the o pen file w indow, o r click on other area e xpect the selected obje ct rectangle if you

link sound.

Tutorial Nine--- Handwriting Recognition

Launching Textbox for Handwriting Recognition

Launching Microsoft office for Handwriting Recognition

Changing the properties of Handwriting Recognition

Launching Textbox for Handwriting Recognition

Switch to Insert Toolbo x, choose Font palette and click Textbox,

Turn to Screen Toolbox to choose Handwriting function with button, active it, you will find handwriting

dialog box pop out as below:

Installation and User Guide of Board Ideas of Interaction

 Select ―English‖ option and the mouse cursor will become a pe n shape which means you can write with

mouse or your finger in the blank area except the Te xtbox re ctangle of flipchart. Please note, in case

of handw riting recognition, all words or letters you write will be shown in green color by software

automatically.

 While writing, in the version of v 3.1, you have to click Space button between every two words, w e

know this action will not bring you with satisfactory experience, we shall enhance our software to

improve the use experience to add space automatically after one word recognized successfully.

 Please note, you are requested to active the Textbox before handwriting recognition, just click in the

Textbox area and make the mouse curse r flicker before you write every time.

Launching Microsoft office for Handwriting Recognition

1. Open Microsoft Word

2. Launch Hand W riting Recognition tools

3. Doing the same way as if in Textbox process

Changing the properties of Handwriting Recognition

Once you finish the hand writing recognition, you may be want to change the words color, size, font, or

order, please sw itch to Font tools palette of Insert Toolbox for continue.

When you finish the process of hand writing recognition, the Textbox will become a tight rectangle and

contain all of the contents, see below image.

Installation and User Guide of Board Ideas of Interaction

1. Select the words

2. Go to the Font palette

3. Choose the proper size, font, and color

4. Click on the other blank area of flipchart page

Tutorial Ten--- Microsoft Word/Excel/PowerPoint annotation and

recognition

Annotation and archive in Word

Handwriting recognition in Word

Annotation and archive in Excel

Handwriting recognition in Excel

PowerPoint presentation

Handwriting recognition in PowerPoint

Annotation and archive in Word

With NHBoard-T V3.1, use r can make any notes in Microsoft office products including Word, Excel and

Powe rPoint, by writing with different pen type to make annotation and save. For example in Word, you

should open the Word file, meanwhile running Tools box or choosing ―Tool‖ by clicking in the popup menu

of bottom right.

1. Open existing Word file in computer

2. Run Floating tools palette

3. Choose preferable pen line height and color

Installation and User Guide of Board Ideas of Interaction

4. Make annotation

5. Switch to left mouse function after you finished all annotation

6. Save all of your actions before close the Word file.

7. Re-open to annotation again.

Notes:

Every time when you start annotation in Microsoft Office application, you will get the watermark of “CopyRight

2009-2012” which can be added to identify the copy right reserved by NANHAO (Beijing) Science and Technology Co.,Ltd,

and you can ignore that when annotation; just by click ing left mouse the these wate rmark will disappear.

Please don’t forget to switch to le ft mouse function when you finished annotation process, or change other pen type /

color / line; all of the pen marked annotation can be moved to anywhere by clicking and dragging. Please remember

that all of the pen marked annotation can’t be deleted by using eraser function, you can click “Delete” on your PC

keyboard or on Screen keyboard.

Handwriting recognition in Word

User can acce ss and get the result of handw riting recognition in NHBoard-T 3.1 not only in Textbox, but also

in many format files, such as document, text file, W ord, Excel, P owerPoint, e ven Internet w ebsite address,

please find below instruction of Handwriting recognition in Microsoft Word.

Installation and User Guide of Board Ideas of Interaction

1. Launching Handwriting recognition function in Floating tools palette.

Click to get mouse function. Please note, this mouse function is different from other “mouse” in Floating tools

palette or othe r place, this mouse function is used to choose the position of the words to be written.

2. Select the language in need. Then, it is the same process like you do in above Textbox handwriting

recognition; of course you can change the font, color, size of recognized standard text result by

selecting firstly.

3. You can write single le tter or word as well as one sentence with handwriting green co lor pen. You can

also switch to keyboard input type during the process.

Annotation and archive in Excel

When make annotation in Excel, you are requested to do almost the same a ctions as per same process like

you do in above Word application.

1. Open existing Excel file in your PC

2. Run Floating tools palette

3. Choose preferable pen line height and color

4. Make annotation

5. Switch to left mouse function after you finished all annotation

6. Save all of your actions before close the Excel file.

7. Re-open to annotation again.

Installation and User Guide of Board Ideas of Interaction

Notes:

Every time when you start annotation in Microsoft Office application, you will get the watermark of “CopyRight

2009-2012” which can be added to identify the copy right reserved by NANHAO (Beijing) Science and Technology Co.,Ltd,

and you can ignore that when annotation; just by click ing left mouse the these wate rmark will disappear.

Please remember that all of the pen marked annotation can’t be deleted by using eraser function, you can click “Delete”

on your PC key board or on Screen keyboard.

Handwriting recognition in Excel cell

1. Launching Handwriting recognition function in Floating tools palette.

Click to get mouse function. Please note, this mouse function is different from other “mouse” in Floating tools

palette or othe r place, this mouse function is used to choose the position of the words to be written.

2. Select the language in need.Then, it is the same process like you do in above Textbox handwriting

recognition; of course you can change the font, color, size of recognized standard text result by

selecting firstly.

3. NHBoard-T V3.1 handwriting recognition functions could also recognize the number which you write

with freehand in Excel cell.

Installation and User Guide of Board Ideas of Interaction

4. You can write single le tter or word as well as one sentence with handwriting green color pen. You can

also switch to keyboard input type during the process.

PowerPoint presentation

NHBoard-T V3.1’s floating too ls palette designs to allow you have a wonderful and professional PPT

presentation no matter in education or in business filed. That is all a bout easy and effectiveness. You can

change pages quickly by clicking on ―next or previous page‖ buttons on PowerPoint presentation Floating

tools palette. You can also make necessa ry annotation by different pen lines height and colors.

Don’t remember to c lick “save” w hen you finished a nnotation on every page (please note this is

different action with do with Word and Excel) before you click next page or previous page, or

close/end presentation.

Notes:

 Please run Floating tools palette and switch your PowerPoint to Presentation model when you make annotation.

 You may find that there are three buttons (previous page, next page and save) on bottom of Floating tools palette,

these three function are designe d for PowerPoint presentation specially.

 Select proper pen type and pen line height, color to make annotation, please click “Save” button to save when you

finish every annotation, or your annotation will be lost.

Installation and User Guide of Board Ideas of Interaction

 Please don’t forget to switch to left mouse function when you finished annotation process, or change other pen type

/ color / line; all of the pen marked annotation can be moved to anywhere by clicking and dragging.

 Please remember that all of the pen marked annotation can’t be deleted by using eraser function, you can click

“Delete” on your PC keyboard or on Screen keyboard.

 If you want to save all annotation you marked when finishing pre sentation, please save this PowerPoint file

before close. In case of that you can re-edit all annotation next time when open.

Handwriting recognition in PowerPoint

User can acce ss and get the result of handw riting recognition in NHBoard-T 3.1 not only in Textbox, but also

in many format files, such as document, text file, W ord, Excel, P owerPoint, e ven Internet w ebsite address,

please find below instruction of Handwriting recognition in PowerPoint.

1. Launching Handwriting recognition function in Floating tools palette.

Click to get mouse function. Please note, this mouse function is different from other “mouse” in Floating tools

palette or othe r place, this mouse function is used to choose the position of the words to be written.

2. Select the language in need. Then, it is the same process like you do in above Textbox handwriting

recognition; of course you can change the font, color, size of recognized standard text result by

selecting firstly.

3. You can write single le tter or word as well as one sentence with ha ndwriting green color pen. You can

also switch to keyboard input type during the process.

Tutorial Eleven --- Screen Tools

Launching and using Spotlight

Launching and using Curtain

Launching and using Highlight Screen

Switching to Black Screen

Launching and Using Spotlight

NHBoard-T V3.1 can be used to aid presentation. One tool is the Spotlight. Select it and then move the

circle light to highlight and focus on certain area when do presentation.

1. Launch spotlight function by clicking on button.

2. Dragging the mouse to move the circle light.

Installation and User Guide of Board Ideas of Interaction

3. Press button at the bottom of both sides to close the spotlight.

Launching and using Curtain

Use a screen shade to focus everyone's attention. W ith this function, you can insert a pull-down s hade over

the current flipchart page and gradually drag it down to reveal the underlying text and graphics .

1. Launch curtain function by clicking on button.

2. Drag the four sides handle to move.

3. Press button to close the screen shade and back to normal present, also you can click the

button to close it.

Installation and User Guide of Board Ideas of Interaction

Launching and Using Highlight Screen

The Highlight Screen Tool is one of the additional presentation aids. It’s different from the Screen Shade

function.

When you launch the Highlight Screen, the whole screen will become black. There will be two buttons at the left and right sides of the bottom.

Users can draw any s hape on the screen rando mly w ith mouse, where yo u selected w ill be highlighted. The

existing content behind w ill be shown, and other areas still keep black.

1. Launching Highlight Screen function by clicking on button，

2. Drawing any kind of shape with mouse or your finger on the screen.

3. Press button to close the Highlight Screen function.

Installation and User Guide of Board Ideas of Interaction

Switching to Black Screen

Using black screen function can cover the content of the screen temporarily without cutting the power off.

It’s very easy to realize.

1. Press on button to active Black Screen function.

2. Single click on any area of screen to back to presentation.

Tutorial Twelve --- Mark Tools

In this tutorial we’ll see a range of tools used for measuring and drawing. They are very useful to make

presentations more vivid.

Creating a new Flipchart page

Using Ruler to draw a line and a triangle

Drawing an Sector or a circle with compass

Using protractor to measure the precise degree

Creating a New Flipchart page

Two ways for you to create a new flipchart page, as we stated from the very beginning of this tutorial,

please see images below,

Using Ruler to draw a line and a triangle

Switch to Mark palette in the Screen Toolbox;

Select the Ruler too l (cm) from the Mark palette.

Installation and User Guide of Board Ideas of Interaction

After sele cting rule r function, a ruler w ill appear on the page. W hen cursor appears as a cross , the rule r can

be moved to anywhere you want. To click the small red circle to adjust the ruler size, while clicking the

small green circle to rotate the ruler.

Practice to Use Ruler and Triangle

1. Selecting ―Size‖ function to draw a line length as 140.0mm

2. Copy this line and drag it to another position next to the original line.

3. Switch to Home Toolbox to choose Align function in Format palette

4. Click Align to choose ―Rotate Right 90 degree‖

5. Click triangle shape from the Graphics palette

6. Drag and draw one triangle

7. Copy this triangle and rotate right 90 degree twice times.

8. Select both triangle and choose blue color to fill

9. Use the drag function fro m cruise pa lette or select all e lements a nd move all elements to anywhere you

want in flipchart page.

Installation and User Guide of Board Ideas of Interaction

Drawing an Sector or a Circle With Compass

Click to launch the compass function. Draw a line and drag the end of the line to get a sector. There are

two points (handle) to adjust the circle attributes, one handle can change the radius, while the other can

change the angle, see image below.

Installation and User Guide of Board Ideas of Interaction

Using Protractor to Measure the Precise Degree

1. Click button to launch protractor

2. Draw a triangle

3. Use ―Size‖ tool to measure the length

4. Use protracto r to find its degree

5. Click the protractor again, the protractor will

disappear.

Tutorial Thirteen --- Screen

Capture, Recorder and Video Player

Launching Screen Capture

Launching Recorder

Launching Video Player

Launching Screen Capture

1. Click button to la unch Screen Capture function

2. Four capture option you can choose

3. Screen capture o ption allows you to capture everywhere in a ctive window. The captured image w ill be

inserted in the current flipchart page.

4. Draw a rectangle on the screen by clicking and dragging diagonally, the re ctangle a rea w ill be captured

as a new image inserting into current flipchart page.

5. To capture the full screen by clicking Capture Full Screen button.

6. Draw any shape on screen as the capture area and release cursor.

Installation and User Guide of Board Ideas of Interaction

Launching Recorder

Using NHBoard-T V3.1 Recorder could record all your actions performed on the screen, as well as your voice

if the microphone equipped. What you recorded will be saved as ―avi‖ fo rmat, and can be opened in

NHBoard-T V3.1 Video Player or in other software like windows media player.

1. Click button to launch Recorder function,

2. Press ―Start recording‖ to start.

3. Select correct video and audio device in the pop out menu and click ok.

4. Press ―Pause recording‖ for stop temporary.

5. Press ―Stop recording‖ when you finished

6. Choose proper archive directory to save

Launching Video Player

To access to NHBoard-T V3.1 Video Playe r, single click NHBoard -T V3.1 shortcut icon from the taskbar on

screen, and choose Video Player option.

Installation and User Guide of Board Ideas of Interaction

NHBoard-T V3.1 Video Player can be used to play videos and annotate over them. These videos include

video files made by NHBoard-T V3.1 or other video files in your computer.

NHBoard-T V3.1 Video Player supports all the video file types supported by Windows Media Player.

Tutorial Fourteen --- Calculator, Clock and Screen Keyboard

Click the ca lculator button to access to the calcula tor function application. You ca n click the calculator

button again to make is disappear.

Click on to launch a simple ―clock‖ floating on screen, you can click the clock button again to make

is disappear.

Installation and User Guide of Board Ideas of Interaction

Screen Keyboard

When you want to rename a file during a presentation, you can use the keyboard to input a new name in

the Save dialog box, without moving to a physical keyboard. Click the button to go into the Screen

keyboard. Or you can single click the icon at the bottom right corner of the intera ctive whiteboard,

choose the screen keyboard option, shows as below.

This screen keyboard of NHBoard-T V3.1 also allows you to make setting to get used to your using habit.

For example, ―Typing Mode‖ support two ways to input the words: single click to select and ho ver to se lect,

once you choose the ―Click to Select‖, it is typical method to ma ke the input, just by single click the words

you want to insert. If choose ―Hover to select‖ option, instead of clicking the word or number of screen

keyboard, you only need to hover your finger or stylus above the word for a certain second, the word or

numbe r can be inserted automatically, you can also change the ―Minimum time to hover‖ option to choose

the precise time detain between every selecting.

Installation and User Guide of Board Ideas of Interaction

―Font‖ option in the ―Setting‖ menu can help you easily change the layout of the screen keyboard.

Congratulation!!

You are largely believed that have get the m ost of the NHBoard-T V3.1 function application

through above fourteen section tutorial practices, below we will show you how to customized

NHBoard-T V3.1 as tailor-made function list as well as language preference and appearance

style.

Tutorial Fifteen --- Customization

Additional tools can be freely added to the Main toolbox. You w ill b e able to customize the toolbox to include

the tools you choose .

Brief introduction of Customize Quick Access Tool Bar

More commands Options

Brief introduction of Customize Quick Access Tool Bar

You can customize the Quick Access Toolbar by co nfiguring the prope rties of each tool or by adding new

tools. Also you can determine the up-down position of Ribbon, or you can minimize it. You can add or delete

most of the function to let them be shown in Ribbon toolbox; you also can set keyboa rd shortcut for some

functions.

Installation and User Guide of Board Ideas of Interaction

More Commands Options

NHBoard-T V3.1 provides you with the access to add and remove each Toolbox’s function.

1. Select command from the catalogue

2. Click “Add”o r ―Remove‖ button to continue

3. Click ―Reset‖ to back to default setting

4. Click ―Customize‖ to set for keyboard shortcut

Installation and User Guide of Board Ideas of Interaction

Tutorial Sixteen --- Changing Style and UI language

Changing Style

Changing UI language

Changing Style

With the different OS and different using habits, we offer many color selections for the interface, which can

be customized.

1. Click Style button

2. Select the style in the drop-down menu

3. Or click custom color in more color option

4. Select preferable color and click ok for exit

Installation and User Guide of Board Ideas of Interaction

Changing UI language

To change UI language, you can click the ―UL language‖ button on the top-right corner of screen to choose

languages. It w ill be altered into the language you selected when the software is opened next time. One pop

out dialogue will pop out to remind you to save changing.

More and more languages will be added in our updated software.

Well done!

You have now finished the NHBoard-T V3.1 tutorials. You should now ha ve sixteen dated checklists showing

that you ha ve completed this book. You will have created Flipcharts with these tutorials or may w ish to use

your skills to create a Flipchart in a subject area of your choice. You can se nd your flipchart to us, if you are

successful, we will send you a Professional User Level certificate. This is the first of three levels of

accreditation available for NHBoard-T V3.1.

Frequently Question

Installation and User Guide of Board Ideas of Interaction

The following lists the frequently asked questions about NHBoard interactive whiteboards and

their answers:

What are the basic devices required by a whiteboard?

 Whiteboard (with w a ll mount bracket or floor bracket)

 Accessory whiteboa rd pen

 Computer

 USB cables connecting your computer and the whiteboard

 Special software

 Projector

 Internet access devices if remote interactive control is required

Which type of projectors can be used with NHBoard Interactive

Whiteboard?

 The proje ctors meeting the following conditions are applicable:

 Front projectors

 Projectors supporting computer resolution

 Minimum optical power no less than 1500 Lumen, which can be s elected in accordance w ith the size of

a room.

Why is the image projected by the projector in the shape of the

wrong size or distorted and how to adjust it?

 If, after orienting, you find that the projected image does not properly fill the screen, or suffers from

distortion or shimmering, the resolution settings of your projector and your computer ma y not match.

It’s very important that the computer and projector resolutions correspond exactly.

 Ensure that the projector is set to its optimal ima ge resolution. Refer to your projector’s manual for the

true reso lution o f your projecto r and reset it if necessary. While the projector manual instructions may

indicate that resolutions o ther than the optimal one are permitted, you should not s et the resolution to

any of these other settings.

 When the projector is not placed properly, the image projected on the whiteboard ma y turn out to be

a keystone. When the projector is placed front higher or rear higher, a vertical trapezium is projected.

Installation and User Guide of Board Ideas of Interaction

When the projector is placed unevenly on both sides, the projector is not in the center in comparison

with the w hiteboard, o r there is an a ngle between the projection dire ction and the horizontal direction

of the whiteboard, a ho rizontal trapez ium of another type is formed.

 When the projected image is in the form of a keystone, the image is distorted and thus should be

adjusted.

 When a vertical keystone is projected, you can use the special adjustment button or elevate the

projector to make an adjustment (for more information, refer to the projector manuals).

 When a ho rizontal keystone is formed, you can adjust the loca tion of the projector to the center of the

whiteboard to achieve front projection.

 You must ma ke a few final adjustments to the projector to ensure a focused ima ge that fits within the

interactive w hiteboard frame at the top and bottom, with a margin of a pproximately 3/8" on both the

right and left sides.

 NOTE: The 3/8" margin described above is an optimal measure ment. Alignment can vary: in some

instances, the image can fill the entire screen; in others, the margin can be greater than 3/8", but be

perfectly satisfactory as long as it’s even on all sides.

 You can fix many proje ctor-related problems right at the projector itself, just by shifting the projector

to the right or left, tilting it or using the zoom lens to sharpen the focus or expand and contract the

image. You can also solve many keystone problems by ra ising or lowering the front or back of the

projector until the sides of the image are parallel to the screen frame .

If words can be input on only certain areas of the whiteboard,

what should I do?

 Check whether the type of the whiteboa rd set in the driver program complies w ith that of the

whiteboard in use .

 Check whether the whiteboard is correctly located.

Can I use common USB lines on the local market to connect the

whiteboard and a computer?

 No. Only special USB cable designed by NANHAO (Beijing) Science and Technology Co., Ltd can be

used to connect the whiteboard and a computer, due to the unique chara cteris tics of data tra nsmitted.

In which cases should I perform Position setting/calibration?

You should perform Position setting/calibration in the following cases:

Installation and User Guide of Board Ideas of Interaction

 The Interactive whiteboard is installed for the first time.

 The relative locations between the projector and the whiteboa rd changed.

 The whiteboard driver changed. For example, the driver program is reinstalled or upgraded, and the

computer is upgraded.

When the software start, a prompt "Communication with the

whiteboard failed. Check that the whiteboard is correctly

connected to the computer". In this case, what should I do?

 Please insure that the USB cable connected are provided by NANHAO (Beijing) Science and Te chnology

Co., Ltd, and che ck whether the USB cable has been connected properly.

 Check whether the Intera ctive whiteboard works normally. (The indicator of the Interactive

Whiteboard can help you to detect, green co lor means you’ve got an active working status quo, other

wise , please pull out and reconnect the USB cable).

 Check whether COM1 to COM4 serial interfaces are used. The whiteboard has to use one of the serial

interfaces.

 Uninstall the Driver and restart your computer before reinstall it.

Why certain anchor points cannot be noticed when I locate the

whiteboard?

 The image is beyond the projection area due to incorrect horizontal or vertical adjustment of the

projector.

 The image displayed is incomplete because the resolution of the computer is not set the same as that

of the proje ctor.

How to transmit data between the whiteboard and the computer

over a long distance?

 You can choose the 25-meter-long USB cable which is one of optional accessories provided by NANHAO

(Beijing) Science and Technology Co., Ltd

 You can install the special w ireless transmission module developed by NANHAO (Beijing) Science and

Technology Co., Ltd and the validity of transmission distance is from 30 to 100 meters.

 please contact our local rese ller or contact us by e-mail to overseas4@nhii.com , or call our

Installation and User Guide of Board Ideas of Interaction

information center at: 0086 10 51666146

How to clean the plane of the whiteboard?

 Two types of writing films can be used on the surface of the whiteboard. One type does not support

water whiteboard pen, whereas the other supports. On both types of films, however, writing with oil

pens is prohibited.

 In routine cleaning, use clean and damp cloth to s crape the writing film (Note : the damp cloth should

be wrung out to avoid water penetrating inside the whiteboard from the bottom frame).

 If an indelible oil color pen is used to write on the writing surface or writing is made on the film that

does not support water whiteboard pens, immediately sip absorbent cotton with ethanol and re -clean

the surface of the whiteboard.

After-sales Service

Congratulations! Thanks for purchasing NHBoard Digital Interactive products, and you will

enjoy our all-dimensional professional service!

Product Warra nty

All NHBoard TGN Series models interactive lectern product are covered by a thre e -ye ar limited equipment

warranty. If you need to return defective merchandise, please contact the information cente r of NANHAO

(Beijing) Science and Technology Co.,Ltd to receive the appropriate Return of Merchandise Authorization,

as well as shipping instructions so that the interactive whiteboard can be sent to an authorized service

center.

Warranty Shipping Charges

Shipping charges incurred from warranty service are paid as follows: The customer is responsible for

shipping the system to the service ce nter. NANHAO (Beijing) Science and Technology Co., Ltd pays return

shipping via ground service on any product returned for service within the warranty period. Any charges

associated with a custome r-requested rush order are billed to the customer. Following the wa rranty period,

the customer is responsible for shipping the product to and from the service center.

Registration

As soon as you become one of NHBoard members after registration, you w ill enjoy another two -year

warranty service. A User Registration Card has been shipped w ith your interactive white board. To facilitate

user support and to receive news and updates, fill in and mail the card to NANHAO (Beijing) Science and

Technology Co., Ltd. You can also register online at http://www.nhboard.net/support.asp . If you indicate

that you would like to receive information on product upgrades, we will e-mail you information on the

newest software and tools for your interactive whiteboard.

General Information

If you have any enquiry regarding our products and technologies, please contact: overseas @nhii.cn

Add: 1207, 1208 Room, 1+1 Plaza, NO.10 Caihefang Road, Zhongguancun, Haidian District, Beijing, China.

Tel: 0086 10 51666146

Fax: 0086 10 82893921

Website: www.nhboard.net

www .in te ra ct i ve -w h it e b o a rd s . co m. c n

Service

Our service staff wo uld be ve ry ha ppy to be your

assistance any time, please

contact:overseas@nhii.cn

Sales Enquiry

Interested in our products and technologies?

Please contact our sa les staff members at

International Business Department:

overseas @nhii.cn

Shipping Enquiry

Any question concerning the shipping issue

including the shipping rate, freight cost,

recommended sipping methods, s hipping status,

please contact our logistic staff via the below

e-mail: overseas@nhii.cn

Distributor/Agent Tutorial

To help and service more and more cus tomers worldwide, and to meet the demand o f our gradually growth

of oversea market shares, we sincerely invite some of our custome rs to join NANHAO (Beijing) Science and

Technology Co., Ltd and work together on the bas is of mutual understanding and mutual trust.

For the sake of avoiding much more repeated works which seems likely to tumble over our efficiency, you

are kindly requested to s tep forward as per the following procedure below if yo u are really interested in to

being one of our partners.

 We need your confirmation that you will never ma ke any actio n or behaviors toward to the current

distributors and agents of NANHAO (Beijing) Science and Te chnology Co., Ltd . A healthy and

well-regulated market status will definitely guaranty all parties’ benefits and provide us with more

harmonious market circumstances.

 We need the detailed information about you and your company, such as your relevant

experiences in the similar line, company webs ite, actual contact address, Telephone number and

something like that, the more specific the more appreciated.

 We need your strategy-based working plan at your territory, and the exact marketing & sale

scope you preferred to, the more specific the more appreciated.

 Please indicate which kind of cooperation methods you prefe rred to, such as Distributor/Agent, or

OEM/ODM.

Please contact at overseas@nhii.cn to get more help if you are interested into this issue. Please rest

assured that all of the information you provided w ill be protected well by our Privacy Declaration

Installation and User Guide of Board Ideas of Interaction

Privacy Declaration

We, NANHAO (Beijing) Science and Technology Co., Ltd, understand that you are ve ry concerned about the

usage and sharing of your personal information. And we are very appreciated your belief o n our prudence

and sensitivity handling this issue. This declaration will specify our po licy regarding the protection of your

privacy.

If you have visited our website (www.nhboard.net), that will be considered to be your acceptance to this

Basic Confidentiality and Privacy Policy

We consider about persona l information, such as your name, postal and e -mail addresses or telephone

numbe r, to be private and confidential. Accordingly, the personal information you provide is stored in a

secure location accessible only by designated staff or authorized agents. NANHAO (Beijing) Science and

Technology Co., Ltd will not disclose any personal information to other organizations.

Information Collection

When you browse our web site, you do so anonymously. Personal information is no t collected. Some areas

of our web sites, however, may request that you voluntarily supply us w ith personal information, including

your name, e mail address, etc., for purposes such as correspondence, site registration, making a purchase,

or participating in online surveys.

NANHAO (Beijing) Science and Technology Co., Ltd may also retain electronic communications yo u send to

our sales/ customer service representatives, webmaster or other associates. These may be shared only

within NANHAO (Beijing) Science and Technology Co., Ltd as a means to continually improve customer

service.

NANHAO (Beijing) Science and Technology Co., Ltd web sites track information about the visits to those

sites. For example, statistics are compiled that show the daily number of visitors to a site, the daily

requests received for particular files on a site, and what countries those requests come from. These

aggregated statistics are used to customize our w eb site to better meet your needs and may also be

provided to others, but the statistics contain no personal information and cannot be used to gather such

information.

Information Use

NANHAO (Beijing) Science and Technology C o., Ltd ma y use the information users give us to, for example,

provide a service, measure consumer interest in our various products and services or inform use rs about

new products and programs. These offers may be based on information provided in surveys, information

that may indicate purchasing preferences or email sent to a NANHAO (Beijing) Science and Technology Co .,

Ltd site .

Installation and User Guide of Board Ideas of Interaction

Any lists used to send you product and service offers are developed and managed under strict conditions

designed to safeguard the security and privacy of customer personal information. NANHAO (Beijing)

Science and Technology Co., Ltd will use reasonable effort to address all requests to remove names from

any postal mail or email lists .

Disclosure

Because NANHAO (Beijing) Science and Technology Co., Ltd considers about the individual information we

maintain to be confidential, o ur policy is to disclo se no personal information gathered o nline to third parties

unless release is required by law or is pe rtinent to judicial or government investigations or proceedings or

the personal information is required for NANHAO (Beijing) Science and Technology Co., Ltd to provide

requested services to users and visitors to the site. NANHAO (Beijing) Science and Technology Co., Ltd

does not sell or rent personal information to o ther organizations unless specifically disclosed at the point of

collection. NANHAO (Beijing) Science and Technology Co., Ltd does not share personal information w ith

unauthorized parties.

Changes to this Statement

NANHAO (Beijing) Science and Technology Co., Ltd will occasionally update this Statement of Privacy to

reflect company and customer feedback. NANHAO (Beijing) Science and Technology Co., Ltd encourages

you to periodica lly review this Statement to be informed of how NANHAO (Beijing) Science and Technology

Co., Ltd is protecting your information.

Contact Information

NANHAO (Beijing) Science and Technology Co., Ltd welcomes your comments regarding this Statement o f

Privacy. If you believe that NANHAO (Beijing) Science and Technology Co., Ltd has not adhered to this

Statement, please contact us. We will use commercially reasonable efforts to promptly determine and

remedy the problem.

Regulatory Compliance

Waste Electrical and Electronic Equipment Regulations

Waste Electrical and Electronic Equipme nt regulations apply to all electrical and electronic e quipment sold

within the European Union.

When you dispose of any electrical or electronic equipment, including NHBoa rd products, we strongly

encourage you to contact your local WEEE recycling agency for recycling and disposal advice.

Your NHBoard product requires the extraction and use of natural resources for its production. It may

contain hazardous substances. By disposing of electrical and e lectronic equipment a ppropriately, you lower

the impact of these substances upon hea lth and the environment and reduce the pressure on natural

resources. Recycling agencies can reuse or recycle most of the materials from your product.

Please think about how you intend to dispose of any product that has a WEEE symbol or accompanying

WEEE guidelines.

Installation and User Guide of Board Ideas of Interaction

If you need more information on the collection, reuse and recycling of e lectrical and electronic equipment,

please contact your local WEEE recycling agency.

Alternatively, contact your local reseller or NANHAO (Beijing) Science and Technology Co., Ltd for

information on the environmental performance of our products.

Restriction of Certain Hazardous Substances (RoHS)

Directives

NANHAO (Beijing) Science and Technology Co., Ltd supports global efforts to ensure that electronic

equipment is manufactured, sold and disposed of in a safe and environmentally friendly manner.

This product meets the requirements of the European Unio n's Restriction of Certain Hazardous Substances

(RoHS) Directive 2002/95/EC, as well as the People's Republic of China's Control of Pollution Caused by

Electronic Information Products (China RoHS).

Subsequently, this product also complies w ith other, less stringent directives that have arisen in various

geographical areas, and that incorporate the European Union's RoHS directive as a bas is.

NHBoard TGN, TGN70, TGU70, TGN83, TGU83 Installation And User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual