NGS NGSV-AVS60S50 User Manual

NGSV-AVS60S50 Color Camera

Weatherproof IR Color Camera

Specification

Packing List

No Name Model Number

1. Weatherproof IR Color Camera NGSV-AVS60S50 1

2. User Guide NGSV-AVS60S50 1

Notes:Before providing power for the

camera, please read this User Guide in
detail!

Do not attempt to disassemble the camera.
If the camera can not work, please contact
local franchiser or our company.

Model

NGSV-AVS60S50

Pick up Element

1/3" SONY CCD

Effective Picture Elements

(H×V)

PAL:500(H)×582(V) NTSC:510(H)×492(V)

Horizontal Resolution

500TV Line

Minimum Illumination

0.0005Lux

S/N Ratio

More than 48dB

Scanning System

2:1 interface

Synchronous System

Internal, Negative sync.

Auto Electronic Shutter

NTSC: 1/60s~1/100,000s, PAL: 1/50s~1/100,000s

Gama Characteristic

0.45

IR Distance

60 Meters (with ￠42X2PCS Infrared LED)

IR Status

Under 10Lux by CDS

IR Power On

CDS AUTO Control

Video Output

1Vpp, 75Ω

Auto Gain Control

Auto

Power/Current

DC12V (+/-10%)/1000mA

Lens

CS Lens 8mm/F2.0

Dimension (mm)

225(W)x175(H)x95(D)mm

Weight (g)

1800

Storage Temperature

-20~+60℃ RH95% MAX

Operating Temperature

-10~+50℃ RH95% MAX

Manufacturer：

Website: www.ngsvision.com.ve

Email: [e-mail]

INTRODUCTION

Congratulations on your purchase of this product.

This User Guide suits NGSV-AVS60S50 series product.
We adopt the latest SONY technical of sensor and driver.
The most attractive characteristics are small and easy
hidden, suits the elevator and corridor. In addition, it owns
the characters of high definition and stability, strong anti­jamming, rich and real color. Fixing and using this model
are convenient too. It is very good for you to apply to your
CCTV system.

Please read this instruction manual carefully to en-

sure proper use of the product.

CONNECTING

BRIEF OF PRODUCT

* Sensor (CCD)

Adopt 1/3" SONY CCD Sensor.

* Auto Gain Control (AGC)

Built-in auto gain control (AGC) circuit. The color camera
can get high definition picture in low Lux condition.

* Auto Electronic Shutter (AES)

Built-in auto electronic shutter function. The color

camera’s AES speed can reach 1/100,000s.

* Gama Characteristic
Camera Gama characteristic is 0.45.

* Scanning Mode
NTSC or PAL mode.

* Water Resistance

IP66

DC12V Power Supply

Monitor

NGSV-AVS60S50

TROUBLE AND SOLUTION

Link wire rule：

Power

Video

Note:

● Please note the camera’s operating temperature and its using

environment requirement. Avoid using the camera at too high
or too low temperatures. The operating temperature is –

20~+60℃. (Recommendatory operating temperature is -
10~+50℃.)

● Never make the camera face the sun or bright object. Other-

wise, it will damage the CCD.

● Do not mount the camera near by the radiator or heater.

1. No picture after providing power

. May be the power supply voltage abnormity, please check the power
supply voltage and pole whether exactitude.

. Please check all the connecting cable and monitors whether be connected
correctly or not.

2. The picture level direction have flowing interference ripples

. May be caused by the power supply AC ripples, it need filter the wave of the
power supply.

. Check the monitor and peripheral equipments used.

3. The picture background color changes continuously

. The fluorescent lamp’s electromagnetic field cause color roll. This is proper
phenomenon of the cameras.
. Reduce the fluorescent lamp numbers or increase the distance between the
camera and the fluorescent lamps can improve it.
. Use power supply external sync. camera can solve it.

4. The picture smear too mass

. The power supply’s voltage unstable.
. Connecting cables not connect correctly or have high impedance.

The symbol is intended to alert the user to the presence of

The symbol is intended to alert the user to the presence of

important operating and maintenance (servicing)
Instructions in the literature accompanying the appliance.

uninsulated ‘dangerous voltage’ within the product’s

enclosure that may be of sufficient Magnitude to consti­a risk of electric shock to persons.

Notes：

●The power supply must through safe attestation. Its output volt-

age,current,voltage polarity and operating temperature must match

the camera’s requirement.

●When using the camera in the thunderbolt condition,please note to

mount Anti-thunder device or put off the power supply plug and cable.

●In order to capture high quality pictures, the power supply’s cable and

video output cable should not be too long.

Video

DC12V

CAUTION:

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER OR BACK NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO OUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC. DO NOT OPEN

CAUTION: TO PREVENT ELECTRIC SHOCKS AND RISK OF

FIRE HAZARDS, DO NOT USE OTHER THAN
SPECIFIED POWER SOURCE.