English
Setting up
Installing the SIM card
The SIM card stores information such as your personal phone
number, PIN code, carrier services numbers, contacts and other
important details. Remove the back cover from the phone first,
sliding a thin object like the side of a credit card or your nail
into the slit on the lower side of the phone to dislodge it from
the chassis.
Both SIM cards must be inserted in the slots placed on the back
side of the phone, with the golden contacts facing downwards.
See the diagram below:
Installing the Memory card
The MicroSD card must be inserted, as for the SIM cards, into
the back side of the phone, after powering it off and removing
the battery. A dedicated slot fort the memory card is placed in
front of the SIM cards. Unlock the memory card slot by pushing
the metal harness toward the “Unlock” position, then open the
harness and let the memory card slide in, with the golden
contacts facing downwards. Then close and lock the harness.
See the diagram below:
Inserting the battery
Your device is provided with a lithium-ion battery and is
designed to be used exclusively with original NGM batteries and
chargers. Battery must be inserted from the backside of the
phone (see the diagram below). Align the battery contacts with
the phone connector inside the dedicated slot, and let it slide
down in position. Once the battery is inserted, close the back
cover by gently pushing it in position through soft pressure all
along the border lines of the cover.
Charging the battery
Please charge the battery completely before starting to use the
device. Use the USB cable provided, connecting one end to the
USB connector placed on the top side of the phone and the
other end to the provided wall socket adaptor. While the
battery is charging, a counter on screen will show the charging
progress. Once charge is completed, the phone can be
disconnected from the grid.
Note: use only the provided USB cable for charging the device.
Please charge the battery indoors, in a dry and favorable
environment.
It’s normal for the battery to get slightly warm during the
charging process. The battery will not reach the full capacity
until cycled several times.
Warning: In order to ensure the correct functioning of the
device and not to void the warranty, please use only original
NGM chargers.
Batteries should not be disposed of as domestic garbage. Please
follow your local disposal rules.
Main functions
Turn on, turn off and standby
Press and hold the Power key to turn on the phone. On the first
start, the phone will suggest some tips to get familiar with the
Android™ system.
Press and hold the same Power key to turn the phone off. The
Power On/Off key also allows to enable Silent mode or Airplane
mode. A short pressure enables the Standby mode (the screen
is switched off) or lets you get back to the Standby screen (see
below).
Main screen
The Main screen is the starting point for all applications of your
cell phone. Other two fully customizable screens are placed to
the left and to the right of the central one. You can place
shortcuts to your favorite applications by keeping them pressed
in the Application screen and moving where you want on the
free space in the screens.
Main menu
Control the touch screen by tapping, tapping and holding, or
dragging across it.
Select an application from Main menu or scroll left or right to
another menu screen. Press the Back key to return to the
previous screen; press the Home key to return to the idle
screen.
Managing a call
By default the Call management on your Dual SIM Android™
asks for which SIM to be used on each call. Otherwise a
preferred SIM can be set. In this case the selected SIM is
automatically used for calling.
To edit these settings select Settings > SIM management >
Default SIM.
It is possible to associate a preferred SIM for each contact by
selecting Settings > SIM management > Contacts & SIM.
Phone call
1. From Main screen, touch the Phone icon to open the Phone
call screen. Enter a phone number using the virtual keypad.
2. Select the SIM card you want to use by pressing the
SIM1/SIM2 icons.
3. To end the call, press the END key.
4. Drag the green icon to the right to accept the call; drag the
red icon to the left to reject it. Touch the Volume up/down
button to silence incoming calls.
Managing contacts
Adding new contacts
1. From Main menu, select Contacts.
2. Choose “+”, then select the location where you want to
save the new contact (Phone or SIM1/SIM2).
3. Enter Name, Number and any other details (when saving
to Phone).
4. Confirm saving.
Adding new contacts from Call list
1. From Main menu, select Call Log.
2. Tap and hold on number you want to save (scrolling the
list including Missed calls, Dialed calls and Received calls).
3. Select Add new contact and choose to save a new
contact or add the number to an existing one.
4. Select the position where you want to save the contact
(SIM1/SIM2, Phone or a configured web account), and
confirm.
Setting ringtones
Select a ringtone
1. From Main menu, select Settings > Audio profiles.
2. Select General and then select Phone ringtone.
3. Select the desired ringtone from the list.
4. It is possible to add a customized ringtone. From Music
select an audio file, then open the context menu and
choose Use as ringtone. The audio file will now be added
to the ringtone list.
Note: it’s possible to use *mid,*wav or *mp3 files. The same
procedure is of course applicable also to other profiles
contained in Audio profiles menu.
Screen lock and shortcuts
Locking your screen
From the Main menu, select Settings > Security > Set up screen
lock. Select the preferred method for locking your phone screen
(Pattern, PIN or Password) and confirm.
Calls redial from call log
1. From Main menu, select Call Log to access the Dialed /
Received / Missed Calls list for both SIM cards.
2. Tap onto the contact image (or the Android logo if no
image is associated with the contact).
3. If the contact has an associated SIM and if you have a
default SIM, the call will be sent by this SIM. Otherwise
you will have to choose the SIM.
How to enable or disable vibration
To quickly disable calls and message ringtones, it is enough to
hold the Volume “-“ pressed from idle screen. Once the
minimum volume level is reached, the phone will automatically
switch to silent mode.
SIM cards configuration
Disabling one of the two SIM card
1. From Main menu, select Settings > SIM management.
2. Select the SIM card to disable (both SIM cards are enabled by
default) by selecting the related checkbox.
Text input
Android™ input method
The default text input method of this phone is the Android™
input method. Android method is an advanced system for
predictive text entry; when writing an SMS, this method
predicts the word that you are typing, changing it with each
keystroke.
Other main features are:
o Fixed writing: misspelled words are corrected while you
are writing
o “Sloppy-Type” error correction: typing errors are
corrected while you are typing
o Word completion: the inserted word is automatically
completed
o Interpretation of abbreviations
o Automatic correction of punctuation
To change the text input settings, select Settings > Language &
keyboard > Android keyboard.
Sending and reading messages
Sending SMS and MMS
1. From Main Menu screen, select MESSAGING > Compose
new message for quick access to text entry screen.
2. Enter the first letters of a contact name in the recipient
field to search a contact, or tap the upper right icon to
insert more than one recipient at once.
3. Enter text using the virtual Android™ keyboard. Once the
message is ready, choose Send.
4. Open the contestual menu and select Attach to include
multimedia attachments (The message will be converted
in MMS).
5. Choose from wich SIM send the message by tapping SIM1
or SIM2 key.
Connectivity
Android ™ requires an active data connection. If not included in
the SIM contract, data connections will be charged in bill, so it is
suggested to use WiFi to establish an internet connection.
To enable SIM data connection select Settings > SIM
management > Data connection.
Connecting to the Internet
You can connect to the internet using WiFi. To activate it, select
Settings > Wireless & networks > Wi-Fi and enable. In order to
set the WiFi and manage the known access point use Wi-Fi
settings. Please follow all the warnings and directions given by
authorized personal where the wireless devices are limited, like
on planes or in hospitals. Switch to Flight mode in order to use
only applications that don’t use any network access.
Google Account
The Android™ main applications use the services provided by
Google account, therefore an account is needed for these
applications to work. These applications are:
o Contacts (Gmail contact synchronization)
o Calendar (Gmail calendar synchronization)
o Gmail (Gmail mails synchronization)
o Gmaps (personal informations and starred places access)
o Gtalk (Instant Messaging by Google)
o Latitude (GPS position sharing)
o Market (Also web-manageble)
Surfing the web
Connecting to the Internet
From the Menu screen, choose Browser. The default
browser for Android™ will be launched. Type the URL in the
address bar to start the navigation.
Email
Thanks to the Gmail™ account synchronization, email
management is easy and the e-mail download is automatic. If
you need to use another mail service provider, please configure
an account in the e-mail application.
How to use Bluetooth
Connecting to a Bluetooth device
1. Turn on the Bluetooth™ device to which you want to
connect. Where necessary, refer to the documentation
of the device.
2. From the Menu screen, choose Settings > Wireless and
networks.
3. Turn Bluetooth on.
4. Select Bluetooth settings to automatically start the
Bluetooth devices search.
5. Select the device name to associate with, and then
choose Associate. The phone will try to connect to the
device, and eventually ask for the pairing code.
Using Android Market
Android Market™ is an online software store developed by
Google for Android devices. The "Market" application is
preinstalled on phone and allows users to search and download
mobile apps published by third-party developers and uploaded
onto the Android Market website. Users can also search and
read detailed information about applications. Some of those
Android applications are already preinstalled on this phone.
Rapid access options
Notifications panel
To open the Notification panel, tap the indicator icons area at
the top of the screen and drag it down with your finger. To hide
the panel, drag the bottom of the list up. When using
whatsoever application, the Notification panel gives you access
to a list of notifications coming from each SIM, and allows you
to quickly enable functions like Wi-Fi, Bluetooth, GPS, Data
connection and Airplane mode, display and rotation settings.
Note: enabling the GPS function doesn’t allow an automatic
GPS connection of the phone; you first need to establish a
Bluetooth connection between your mobile phone and an
external GPS antenna (a dedicated application is needed).
Accessing recent applications
When using whatsoever application, press and hold the Home
key (main screen) to view the applications you have accessed
recently. Touching the corresponding icon, you will be brought
back to the application screen.
Context menu
When using any application, press the Menu key to open a
context menu referred to the same application.
Copyright © 2012 NGM Italia
No part of this manual may be reproduced, distributed, translated, or
transmitted in any form or by any means, electronic or mechanical,
including photocopying, recording, or storing in any information storage
and retrieval system, without the prior written permission of NGM Italia.
The AndroidTM logo, Google Maps™, Google Mail™, YouTube™, Android
Market™, and Google Talk™ are trademarks of Google, Inc.
Bluetooth® is a registered trademark of the Bluetooth SIG, Inc. worldwide.
Wi-Fi® and the Wi-Fi logo are registered trademarks of the Wi-Fi Alliance.
Loading...