NEXXT SOLUTIONS 320U1 Users Manual
Nexxt Solutions - Integrated Wireless IP Camera
21
FTP Uploading: when the alarm is triggered, the
program will upload the snapshots to the FTP server.
Upload file: three options are available: picture only,
video only, or both picture and video.
FTP host address: account information required to
access the File Transfer Protocol host.
FTP port: the default is set to 21.
User name: the user name used in the FTP login
window.
Password: the FTP password used in the login
window.
Upload Directory: This is the path used for saving
uploaded files. The program will create a folder using
the time the alarm went off. The pictures and videos
will be saved to this directory.
Dialing: when the alarm is triggered, the program
will dial the assigned telephone number automatically using the PC’s modem. This service requires
a modem to be installed on the PC which supports
dialing functions.
Dialing device: choose the modem from the list that
Nexxt Solutions - Integrated Wireless IP Camera
22
supports the dialing feature.
Number to be dialed: the number which will be
dialed once the alarm is triggered.
Test: Click Test to make sure this setting is
functional.
SMS modem: when an alarm is triggered, the program will send a Short Message Service transmission to the assigned phone through the modem.
This service requires an SMS modem to be installed
on the PC.
SMS modem port: the serial port number which is
attributed to the SMS modem.
Receiving phone number: the enabled-SMS land
line or mobile phone number which will receive the
incoming message when the alarm is triggered.
SMS interval (in minutes): defines the time interval
in minutes that the SMS alerts will go off while the
alarm is active.
Test: click this button to test this service, the
program will send a SMS to the assigned phone
number.
Nexxt Solutions - Integrated Wireless IP Camera
23
Skype: when an alarm is triggered, the program will
use Skype to send Skype messages, text messages,
Skype calls and call a mobile phone.
This feature requires for Skype to be installed on
your computer. When the alarm is triggered, the
program will call or open the Skype interface, so
that it can execute the actions mentioned above. If
Skype is not running, the program will automatically
start Skype. You can download Skype by going to
http://www.skype.com.
Send Skype Message: this option sends a text
“message” to the designated Skype account.
Send SMS: this option sends a text “message” to
the designated phone. Please note that this feature
requires a Skype account balance. To know more
about using Skype to send SMS, recharge information, etc., please visit the official Skype website.
Call: it places a call to the designated Skype account
or to a designated phone number. Please note that
the “dial a designated telephone number” feature
requires a Skype account balance. To know more
about using Skype to make calls, please visit the
Skype official website.
Nexxt Solutions - Integrated Wireless IP Camera
24
Test: click Test to make sure this setting is
functional.
Application: when the alarm is triggered, the
program will execute the selected program.
Program: it defines the path for the .exe file
belonging to the selected program.
Run parameter: the run parameter values should
be entered in this box.
Run once: this option will execute the command only
when the alarm goes off for the first time, with no
further action after that.
Nexxt Solutions - Integrated Wireless IP Camera
25
URL Link: when the alarm is triggered, the program
will open the assigned URL. Usually, this is used to
inform other systems about the alert.
User Account Administration
The Client supports a multi-level management system, whereby different users are granted specific
privileges and passwords for controlled access.
This function is not enabled by default. Please click
the Setup menu button on the lower right side of
the dialog window and choose User Account Setup
to continue.
Nexxt Solutions - Integrated Wireless IP Camera
26
When this feature is enabled, the program will
always request authentication from users.
By default, the admin account enjoys full administrator privileges. This account can never be deleted;
however, its password can be changed.
Add operator: click the Add button and the dialogue
box below will appear.
Once you type in the account information and assign
the corresponding permissions, click OK to save it.
Privileges to add or remove accounts mean that the
account operator can include or delete its dependant users. This takes effect only after logging in
with this account.
Loading...