Page 1
4313449
CALLER ID*
EASY-DIAL SPEAKERPHONE
USER GUIDE
*Requires subscription to additional features
provided by your local telephone service provider.
Page 2
1
Index
Government Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Location Of Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installing Batteries In The Telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Connecting The Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Wall Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Method A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Method B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Basic Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7
Making A Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Pre Dialing A Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Receiving A Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Redial Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Pause. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Call Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Ringer Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Speaker Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Receiver Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Tone Receiving Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Message Waiting Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Hearing Aid Compatibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
The Phone Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8
Letters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Storing Names/Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Dialing From The Phone Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Changing Phone Numbers/Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Deleting A Phone Book Entry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Storing One-Touch Memories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Dialing Using One-Touch Memories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Storing Two-Touch Memories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Dialing Using Two-Touch Memories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Retrieving And Dialing CID Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
CID Call Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Deleting Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Transferring Numbers To The Phone Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Government Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Page 3
2
Government Statements
IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, basic safety precautions should
always be followed to reduce the risk of re, electric shock and injury to
persons, including the following:
1. Do not use this product near water, for example, near a bath tub, wash
bowl, kitchen sink or laundry tub, in a wet basement or near a
swimming pool.
2. Avoid using a telephone (other than a cordless type) during an electrical
storm. There may be a remote risk of electric shock from lightning.
3. Do not use the telephone to report a gas leak in the vicinity of the leak.
4. Use only the power cord and batteries indicated in this manual. Do not
dispose of batteries in a re. They may explode. Check with local codes
for possible special disposal instructions.
SAVE THESE INSTRUCTIONS!
Page 4
3
Location Of Controls
1. Telephone Line Jack
2. Hook Switch
3. Handset Holder
4. DELETE Button
5. CALL BACK Button
6. Memory Buttons (M1, M2)
7. Speaker
8. Keypad
9. Handset Volume Control
10. Loud LED
11. Volume Booster
12. Power Jack
13. New Call LED
14. Display (With Backlight)
15. / Buttons
16. Ringer HI/MID/LO Switch
17. MEM (Memory) Button
18. CID (Caller ID) Button
19. Button (Phonebook)
20. Tone HI/LO Switch
21. STORE Button
22. Volume HI/LO Switch
23. FLASH Button
24. REDIAL Button
25. Button (Speaker)
26. Ringer LED
27. Speaker LED
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Page 5
4
Installation Wall Mounting
Installing Batteries In The Telephone
Warning
The telephone can be operated with or without AC adapter. The full
range of telephone functions can only be utilized if batteries or the
power adapter (optional) are used.
The battery compartment is located on the base of the telephone. Open
the battery compartment and insert 4 x AA batteries (not included). Pay
attention to correct polarity. Close the battery compartment cover.
When the batteries are weak, the icon appears in the display.
Replace the batteries.
1. Use a flat-blade screwdriver or the tip of a pen to lift and remove the
battery compartment door.
2. Insert four AA batteries into the compartment as indicated by the
polarity symbols.
3. Snap the battery compartment door back into place.
Connecting The Telephone
1. Connect the AC adapter (optional, not supplied) to the DC 9V 200mA
jack at the top end of the telephone and a standard AC outlet.
2. Plug one end of the telephone cable supplied into the TEL. LINE jack
at the back of the telephone base.
3. Plug the other end of the telephone cable into the wall outlet.
4. Plug one end of the curly cord into the socket on the handset.
5. Plug the other end of the curly cord into the left side of the telephone.
Method A
To fit to an existing telephone wall plate with modular connector simply:
1. Lift out the handset tab holder on the base of the unit. Rotate it 180°,
and snap it into place (fig. A) so it will hold the handset in place when
the phone is mounted on the wall.
2. Insert the mounting bracket’s two tabs into the matching slots on the
phone’s base (fig. B).
3. Then press down and slide the bracket upward until the tabs snap
into place.
4. Plug the short telephone line cord (supplied) into the base of the
phone and plug the other end into the telephone wall plate socket.
5. Position the mounting holes on the base of the phone over the two
protruding screws on the wall plate. Gently push the phone flush
against the wall plate then slide the phone downwards locking it into
place.
fig. A fig. B
Method B
Attach directly to a wall:
1. Drill two holes vertically, one above the other, 83mm apart, and leave
the screws protruding from the wall by 5mm.
2. Follow steps 1 and 2 above.
3. Then press down and slide the bracket upward until the tabs snap
into place.
4. Plug one end of the telephone cable into the TEL. LINE jack at the
back of the base.
5. Plug the other end of the telephone cable into the telephone socket,
then align the base’s keyhole slots with the screws and slide the
phone downward to secure it.
Page 6
5
Wall Mounting Operation
Basic Settings
1. After installing the batteries, the display should flash the word
“ENGLISH”. If not, press and hold button for approximately
4 seconds.
2. Select the desired language using or buttons. Press DELETE
button to confirm.
3. Select the desired contrast setting (2=Default) using or buttons.
Press DELETE button to confirm.
4. Set the hour (00-12) using or buttons. Press DELETE button
to confirm.
5. Repeat to set minute, month and day.
6. Set the TONE/PULSE using or buttons. Press DELETE button
to confirm.
If you wish to change the language, contrast, time settings at a later
date, press and hold button for approximately 4 seconds and repeat
steps 2-6 above.
When the telephone is not in use, the date and time, number of new and
total number of calls stored in the Caller ID memory will be shown on the
display. The display will show the caller number (and name if available).
Making A Call
1. Pick up the handset or press button (the LED will light) and wait
for a dial tone.
2. Dial the number you wish to call. The display will show the number
that you are dialing. If you dial a number over 14 digits long, it will
show the last 14 digits only.
3. When you have completed your call, hang up the handset or press
button again to release the telephone line.
It is possible to switch from a handset to speakerphone conversation by
pressing the button and picking up or hanging up the handset
accordingly.
Pre Dialing A Call
1. Dial the number you wish to call. To correct a number press DELETE
button for each incorrect digit.
2. Pick up the handset or press button or CALL BACK button.
Receiving A Call
When you receive a call, the telephone rings, the Ringer LED flashes,
and the display shows the CALL# and the caller telephone number
(when caller ID service is activated). This feature allows you to decide to
pick up the phone or not depending on who is calling.
If you want to talk to the caller:
1. Pick up the handset or press button to answer the call.
2. At the end of the call, return the handset to the cradle or press
button again.
Page 7
6
Operation
Redial Function
Use this function if a number that you have dialed is engaged and you
are unable to get through. The last number dialed will be saved in the
telephone automatically. To use the redial function:
1. Lift the handset or press button.
2. Press REDIAL button. The last saved redial number will
automatically be dialed.
Pause
This function is often required for phone banking or when using a PBX
system.You can insert a 3.6 second pause while dialing or storing a
number into MEM. Press REDIAL button at the desired point in number
to insert a pause.
Flash
The FLASH button can be used to obtain a new dial tone after ending a
call. The FLASH button is also a useful feature for special telephone
services such as Call Waiting and Three-Way Calling.
Note: These special telephone services must be subscribed to
separately from your local phone company.
Call Timer
Immediately after dialing a telephone number a call timer will be shown
on the display. The timer is a simple way to help you keep track of how
long the call lasts.
Ringer Volume Control
The ringer sound level can be adjusted by sliding the RINGER switch.
Select high (HI), medium (MID), or soft (LO) sound level. If you do not
want to be disturbed, slide the RINGER switch to the OFF position.
The bright Red LED on the base will flash with all incoming calls.
Speaker Volume Control
You can adjust the speaker volume level that suits you by sliding the
VOLUME switch.
Receiver Volume Control
The Loud LED is used to reflect the receiver volume setting. Press +
button, the Loud LED will turn on, then increase the receiver volume by
rotating the knob to select the listening level (level 1 to level 9). The
Loud LED will be off if the receiver volume is set to the minimum level.
Tone Receiving Adjustment
You can also use the TONE HI/LO slide switch to increase the receiver
volume of high frequency sounds according to your own hearing
requirement. This will help words to be clearer and easier to understand.
Note: The tone adjustment function will not be effective if the receiver
volume has been set to the minimum level.
Message Waiting Indicator
When you are unable to answer a call, the incoming call will be
forwarded to a mail box where the caller can leave a message.
The symbol will light, and the display will indicate “MESSAGE
WAITING” to alert you to listen to the stored message. The symbol
will turn off once the message is played. Or, you can press the DELETE
button once the display shows “DELETE ?”. Press and hold the
DELETE button to turn off the new call LED and the “MESSAGE
WAITING” message.
Note: Subscription is required to use the Message Waiting services.
Page 8
7
Operation The Phone Book
Hearing Aid Compatibility
This unit is compatible with most coupled hearing aids on the market.
However, due to the wide range of hearing aids available, there is no
guarantee that this unit will function error free with every hearing aid
model.
The Phone Book will store a maximum of 32 telephone numbers (22 digits
max.) and their associated names (16 characters max) with entries
arranged alphabetically. A stored phone number can be dialed using fewer
keystrokes than if dialed manually. If you subscribe to a Caller ID service,
the name/number of the caller will be shown when you receive an incoming
call (only for those numbers stored in the Phone Book or M1/M2 memories).
Letters
Each number key has been allocated certain characters.
BUTTON LETTERS / SYMBOLS
1........................ [Space character] + & - / X 1
2........................ A B C Å Ä Æ æ å ä ß 2
3......................... D E F ë 3
4......................... G H I ï 4
5......................... J K L 5
6........................ M N O Ñ ñ Ö ö 6
7........................ P Q R S 7
8........................ T U V Ü ü 8
9........................ W X Y Z 9
*......................... ‘ @ ( ) * < >
0......................... , . : ? = 0
#......................... $ _ % ! #
Storing Names/Numbers
1. Press button.
2. Press STORE button.
3. Press STORE button again.
4. Enter the telephone number to be stored (up to 22 digits).
Press STORE button.
5. Enter the name (up to 16 characters). Press the corresponding number
button one or more times for the first letter (see the table above).
6. Press STORE button.
Page 9
8
The Phone Book Memory
Dialing From The Phone Book
1. Press button.
2. Scroll to the required memory location using or buttons. To
quick search in the Phone Book press the corresponding number
button one or more times for the first letter (refer to the table on the
previous page).
3. Press button or CALL BACK button to dial the displayed number.
If you do nothing the phone will return to standby mode.
Changing Phone Numbers/Names
1. Press button.
2. Scroll to the required memory location using or buttons.
3. Press and hold STORE button until “EDIT?” is displayed.
Press STORE button.
4. Changes to the displayed telephone number can be made using
DELETE button and or buttons. Press STORE button.
5. Changes to the displayed name can be made using DELETE button
and or buttons.
6. Press STORE button to confirm the changes.
Deleting A Phone Book Entry
1. Press button.
2. Scroll to the required memory location using or buttons.
3. To delete a single number, press DELETE button, “DELETE?” will
be displayed. Press and hold DELETE button until the displayed
telephone number disappears.
4. To delete all numbers, press and hold DELETE button until “DELETE
ALL?” is displayed. Press and hold DELETE button until “EMPTY” is
displayed.
The telephone has 2 one-touch memories (M1 and M2) and 10 two-touch
memories (MEM) for the most frequently dialed telephone numbers. When
a number is stored into Memory you will press one or two buttons depending
on where the desired number is stored. The direct one-touch memories are
M1 and M2. To call a two-touch memory number, first press MEM, then the
corresponding numerical digit (0-9) on the keypad.
Storing One-Touch Memories
1. Press STORE button.
2. Enter the telephone number to be stored (up to 22 digits).
Press STORE button.
3. Enter the name (up to 16 characters). Press the corresponding number
button one or more times for the first letter (see the above table).
Press STORE button.
4. Press either M1 or M2 button to store the number.
Dialing Using One-Touch Memories
1. Lift the handset or press button and wait for a dial tone.
2. Press either M1 or M2, the stored telephone number will now be dialed.
Storing Two-Touch Memories
1. Press STORE button.
2. Enter the telephone number to be stored (up to 22 digits).
Press STORE button.
3. Enter the name (up to 16 characters). Press the corresponding number
button one or more times for the first letter (see table on page 7).
Press STORE button.
4. Press either 0-9 to store the number.
Dialing Using Two-Touch Memories
1. Lift the handset or press button and wait for a dial tone.
2. Press MEM button.
3. Select a memory location by pressing the relevant keypad digit 0-9.
Page 10
9
Caller ID
Caller ID allows you to see who is calling before you answer a call and
to see who has called in your absence. If the number is stored in the
indirect memory, it’s associated name will be displayed instead. The
CID memory will store up to 32 name/telephone numbers stored
chronologically. The sequence number is shown in the top right-hand
side of the display.
When the memory is full, the oldest number will be deleted automatically
as the new call is logged. New calls are indicated in plain text in the
display and the flashing of the red New Call indicator.
Note: In order for numbers to be shown, the Caller ID service must be
provided by your network operator and a current subscription in place.
Contact your telephone service operator for more information.
Retrieving And Dialing CID Numbers
1. Press CID button to select caller-ID mode.
2. Press either or buttons to review the numbers stored in the
Caller ID memory.
3. To dial a displayed telephone number either press CALL BACK
button or button. The displayed telephone number will now be
dialed. If you do nothing the phone will return to standby mode.
Note: If the Caller ID number is 10 digits, press CALL BACK button
once, the unit will insert “1” before the Caller ID number automatically.
You can press button repeatedly to select or unselect “1”. Press
CALL BACK button again, the speakerphone will turn on automatically
and dial the display number.
CID Call Types
Besides showing telephone numbers, the display can show a number of
messages:
OUT OF AREA It is an International call or a call from a PBX (no
information received).
PRIVATE Information on the number is blocked. The call
could also be from a PBX.
NEW Number not previously seen.
Several calls have been received from the same
caller.
Deleting Numbers
1. Scroll to the telephone number you wish to erase using or
buttons.
2. Press DELETE button. “DELETE?” will be displayed. Alternatively
press and hold DELETE button until the display shows “DELETE
ALL?”.
3. Press and hold DELETE button until the displayed number
disappears.
Transferring Numbers To The Phone Book
1. Scroll to the telephone number you wish to copy using or
buttons.
2. Press STORE button.
3. Press STORE button again.
4. Name can later be added according to the section “Changing Phone
Numbers/Names”.
Page 11
10
Government Statements
INDUSTRY CANADA CS03 STATEMENT
This product meets the applicable Industry Canada technical specications.
This is conrmed by the registration number. The abbreviation, IC before the
registration number signies that registration was performed based on a
Declaration of Conformity indicating that Industry Canada technical
specications were met. It does not imply that Industry Canada approved
the equipment.
Before installing this equipment, users should ensure that it is permissable to
be connected to the facilities of the local telecommunications company. The
equipment must also be installed using an acceptable method of connections. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations.
Repairs to certied equipment shold be made by an authorized Canadian
maintenance facility designated by the supplier. Any repairs or alterations
made by the user of this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user to disconnect the
equipment.
WARNING! Users should not attempt to make such connections themselves,
but should contact the appropriate electric inspection authority, or an
electrician, as appropriate.
CAUTION: The Ringer Equivalence Number (REN) assigned to each
terminal device provides an indication of the maximum number of terminals
allowed to be connected to a telephone interface. The termication on an
interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices
does not exceed 5. An alternative indication of the REN is the Load Number
(LN). This number should be divided by 20 to approximate the equivalent
REN. The REN Number of this unit is indicated on the bottom of your answering machine.
The FCC Wants You To Know
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed or used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures: 1) reorient or relocate the receiving antenna; 2) increase
the separation between the equipment and the receiver; 3) connect the
equipment to an outlet on a circuit different from that to which the receiver is
connected; 4) consult the dealer or an experienced radio/TV technician for
additional suggestions.
Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Where shielded interface cables have been provided with the product or speci-
ed additional components or accessories elsewhere dened to be used with
the installation of the product, they must be used in order to ensure compli-
ance with FCC regulation.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference including interference that may
cause undesired operation of the device.
Canadian DOC Statement
DOC Class B Compliance - This Class B digital apparatus complies with
Canadian ICES-003.
Page 12
11
Warranty
Please Recycle
THE SOURCE WARRANTY
The Source warrants that this product will be free from defects in
materials and workmanship for a period of one (1) year from the date
of purchase. Within this period, simply take the product and your proof
of purchase to any The Source store or dealer and the product will be
repaired without charge for parts and labour. The Source reserves the
right to charge for transportation. Any product which has been subject
to misuse or accidental damage is excluded from this warranty.
This warranty is only applicable to a product purchased through The
Source company owned stores and dealers and to a product that is
presented for repair in a country where The Source offers the product
for sale. While this warranty does not confer any legal rights other than
those set out above, you may have additional statutory rights which
will vary under the laws of the various countries, states, province
and other governmental entities in which The Source operates. This
warranty is subject to all statutory rights you may have in the country
of purchase.
Limited Warranty
© 2008-2011 The Source.
All Rights Reserved.
Imported by:
The Source,
Barrie, Ontario, Canada, L4M 4W5
Manufactured in China
For product support please visit
www.thesource.ca
Loading...