Page 1
Mini Digital Scale
INSTRUCTIONS
6313014
Operating Buttons
A. On / Zero / Off
B. Unit
C. Tare / Gross / Net
D. Sampling
B.
dwtdwt
oztozt
pcspcs
ctc t
gg
ozoz
Power On, Power Off, or Reset Zero
Press On button once to turn on the scale.
Press and hold On button for 1-second to reset the scale to zero.
(ZERO symbol will show in the display)
Press and hold On button for 3 sec to shut off the scale.
Unit Exchange
Press Unit button to change the unit on the scale.
The sequence for the scales’ unit shows as : g(gram), oz(ounce),
ct (carat), dwt(penny weight) or ozt(troy ounce)
Tare Function
Place an empty container on the scale. After the reading is stable, press
Tare button for 2-seconds to go into tare mode. The LCD will display Tare
and Net symbols, and the reading becomes zero. In this situation the Zero
symbol “0” will not be displayed.
• Place object into the container. The net weight will show on the display.
Press Tare button once, the gross weight (the container and the object
weight combined) will show on the display.
• Press Tare button again. The scale will show the net weight of tare
object.
• Remove the tare object – leaving nothing on the scale. (zero and tare will
display at the same time). The Tare symbol will be cleared when you turn
off tare function. Press the Tare button for 2-seconds to shut off the tare
function.
C.
A.
D.
Sampling Function
Press pcs button for 2-seconds to set the sample pieces.
DISPLAY FLASHES S=10, S=20, or S=50 depending on the number of sample pieces set.
Choose the desired number of sample pieces by pressing pcs button. The display
sequence shows as the following: 10>20>50>10. Stop pressing when the display shows
your desired sample pieces. Leave selected number on the scale for 2-seconds for the
sample pieces to be set as the default.
• Press pcs button to go to sampling function.
S=10(10 pieces), S=20(20 pieces), or S=50(50 pieces) depending on the default sample
pieces setting. Put on the tray the exact number of sample pieces which is shown on
the display.
• Press pcs button again to confirm, "CAL" will show on the display when the scale is
doing the samples calculation.
After the calculation is done, the number of sample pieces which you had selected
(10, 20 ,or 50) and the Pcs symbol will show on the display. Scale is ready to do sampling.
• Place the object(s) on scale. The scale will count the sample pieces and will show
amounts on the display.
Holding Result for 5-seconds
After an object is placed on the scale, the objects weight will be displayed. Buzzer will
sound when the result is stable. After buzzer has sounded, the object can be removed
from the scale and the result will stay on the display for 5-seconds.
Auto Shut Off
The scale will automatically turn off after 3 minutes to save energy.
Low Battery Indication
Low battery symbol will show on the display if the battery is low.
Battery Requirement: 2 x CR2032 batteries (included).
Resetting the Scale
When the scale does not respond, remove, and reinstall the batteries to reset scale.
CAUTION
If the zero point is not stable, "UNST" will be displayed. The Total weight on the scales is
300 grams. If the scale exceeds its capacity, then "EEEE" will display.
The cover of the scale can double as the measuring plate for the scale
1. Open the scale's cover all the way,
detach the scale's cover from the
scale. Then, use the scale's cover as
a measuring plate.
Detach the cover from the scale by
pushing straight down.
Separate cover and
place on top of scale.
2. The scale's cover can be
re-attached to the scale by
following the instruction in
reverse.
Re-attach the cover by pushing scale
down onto the lid and snapping
the hinge back in place.
Page 2
6313014
LIMITED WARRANTY
Who is Providing This Warranty?
• Orbyx Electronics, LLC (“Orbyx”), as the distributor of this Nexxtech
product (your “Product”).
What Does This Warranty Cover?
• This warranty covers defects in materials or workmanship in your
Product under normal use and conditions.
What is the Period of Coverage?
• This warranty covers your Product for 90 days from the original
purchase date.
Who Is Covered?
• This warranty covers the original consumer purchaser. Coverage
terminates if you sell or otherwise transfer your Product.
What Will We Do To Correct Problems?
• We will repair your Product or replace your Product with a new or
reconditioned equivalent product, at our option.
How Do You Get Service?
• Call Orbyx TOLL FREE at 1-866-363-3059 for instructions for
obtaining warranty service from Orbyx’s authorized service providers.
• Or, return your Product directly to the retail store from which you
purchased the Product.
• When you obtain service for your Product, you must provide a
purchase receipt (or other proof of the original purchase date) and a
description of the defect(s).
What Does This Warranty Not Cover?
• This warranty DOES NOT COVER:
• damage due to misuse, abuse, alteration, unauthorized repair, or
accident (such as improper electrical current);
• damage due to “acts of God” (such as lightning) or other contingencies
beyond our control;
• cosmetic damage;
• externally generated static, signal reception or antenna problems not
caused by your Product; or batteries.
• This warranty also DOES NOT COVER, and in no case will we be
liable for, any incidental damages (such as transportation costs to and
from an authorized service provider, or loss of time) or consequential
damages (such as costs of repairing or replacing other property which
is damaged, including tapes, discs, speakers not included with your
Product or other accessories, or external electrical systems) resulting
from the use of your Product. Some states do not allow the exclusion
or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you.
• Defacing the serial number, or using your Product for commercial or
institutional purposes, voids this warranty.
Are There Other Warranties?
• There are no express warranties other than those expressed herein.
Neither the sales personnel nor any other person is authorized to
make any other warranties or to extend the duration of any warranties.
• ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY (AN UNWRITTEN WARRANTY
THAT A PRODUCT IS FIT FOR ORDINARY USE), ARE LIMITED TO
90 DAYS. Some states do not allow limitations on how long an implied
warranty lasts, so the above limitation may not apply to you.
How Does State Law Apply?
• This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
TM
LIMITED WARRANTY
ORBYX ELECTRONICS WARRANTY
ORBYX Electronics warrants that this product will be free
from defects in materials and workmanship for a period of
ninety (90) days from the date of purchase. Within this
period, simply take the product and your proof of purchase
to any ORBYX Electronics store or dealer and the product
will be repaired without charge for parts and labour. ORBYX
Electronics reserves the right to charge for transportation.
Any product which has been subject to misuse or accidental
damage is excluded from this warranty.
This warranty is only applicable to a product purchased
through ORBYX Electronics' company owned stores and
dealers and to a product that is presented for repair in a
country where ORBYX Electronics offers the product for
sale. While this warranty does not confer any legal rights
other than those set out above, you may have additional
statutory rights which will vary under the laws of the various
countries, states, province and other governmental entities
in which ORBYX Electronics operates. This warranty is
subject to all statutory rights you may have in the country of
purchase.
Distributed exclusively in the U.S. by
Orbyx Electronics, LLC
501 South Cheryl Lane,
Walnut, CA 91789
Imported in Canada for/Importé au Canada pour
Orbyx Electronics,
Concord, Canada, L4K 4M3
Manufactured in China
For product support please contact www.orbyxelectronics.com
or 1-866-363-3059
Limited Warranty/Garantie Limitée
U.S.A & Canada
© 2004 ORBYX Electronics. All Rights Reserved.
Loading...