NexxTech 1511951 User Manual

Download

Page 1

WIRELESS

REMOTE EXTENDER

USER MANUAL

1511951

Page 2

Product Description

Applications

The Remote operation of electronic products that utilize IR (Infrared) remote control technology are:

The Wireless Remote Extender enables you to extend the range of your present

Infrared IR Remote Control up to 100 feet, so that you can operate VCRs, stereos, Cable Converter, Satellite receivers, etc, virtually anywhere within your home.

Unlike ordinary remote controls which are only effective in close range, “line of sight” use. The Wireless Remote Extender uses radio frequencies and can operate through walls, doors, around corners, etc.

Televisions VCR's (Video Cassette Recorders) CD Players DVD Players LDP's (Laser Disc Players) Cable Converter Boxes Satellite Receivers Audio / Hi-Fi Stereo Systems Wireless Video Sender Systems Any (IR) Remote Controlled Devices

Page 3

Installation

Transmitter:

Receiver / Probe:

You will be using your normal IR remote control and “aiming” it at the extender transmitter.

1. Plug the supplied AC adapter into any standard electrical wall outlet.

2. Connect the other end of the AC adapter cable in the “power in” socket located on the side of your transmitter unit.

3. Place the transmitter in the remote location so that it is in the line of

sight of the position where you are located (couch, chair, bed, etc.) so that you can “aim” your remote control at the transmitter.

1. Plug the supplied AC adapter into any standard electrical wall outlet.

2. Connect the other end of the AC adapter cable into the “power in”

socket located on the side of the receiver unit.

3. Place the receiver in a high, line-of-sight position facing the front of the

electronic device you are going to control. Be certain that there are no obstructions between the receiver and the infrared receiving window of the equipment.

line-of-sight of the controlled equipment, a remote probe is supplied.

Plug one end of the probe cable into the jack located on the side of the receiver. Attach the other end of the probe to the IR receiving window of the equipment being controlled using double stick tape attached to the probe.

The remote probe enables you to place the receiver in a high location,

or near the equipment being controlled, and have the probe transmit the IR

data directly to the IR receiving window of the equipment.

4. In situations where it is not possible or convenient to place the receiver in

Page 4

INSTALLATION DIAGRAM

B. Stereo System with remote Probe:

A. Stereo System:

Stereo

Speaker Wire

Receiver

Wall

Transmitter

IR Remote Control

Wall

Transmitter

Receiver

Probe

IR Signal

RF Signal

Stereo

Speaker Wire

Page 5

D. VCR / TV /Wireless Video System with remote Probe:

C. VCR / TV /Wireless Video System:

VCR

Receiver

Wall

Transmitter

2.4GHz Wireless Video Sender

2nd TV

VCR

Receiver

Wall

Transmitter

2nd TV

2.4GHz Wireless Video Sender

Probe

Page 6

Care and Maintenance

Keep the

Remote Extender dry. If it gets wet, wipe it dry immediately.

Use and store the IR Remote Extender only in normal temperature environm

ents.

Extreme temperature can shorten the life of electronic devices

Handle the IR Remote Extender gently and carefully. Dropping it can damage the circuit board an

can cause it to work improperly.

Keep the IR Remote Extender away from dust and dirt, which can cause

Wipe the IR Remote Extender with a damp cloth occasionally to keep it looking

new. Do not use harsh chemicals, cleaning solvents, or strong detergents.

premature wear of parts.

Specifications

Operating Voltage .......................................105-130 VAC, 60Hz

Power Consumption (pair)............................4

Watts Max

Transmission Frequency...............................418 MHz + / - 1 MHz

Page 7

Interference

Your extender might cause TV or radio interference even when it is operating properl

y. To determine whether your extender is causing the interference, turn off your extender. If the interference goes away, your extender is causing it. Try to eliminate

the interference by:

• moving your extender away from the receiver

• connecting your extender to an outlet that is on a different electrical circuit

from the

receiver

• contacting

your local electronic store for help

If you cannot eliminate the interference, you may be required to stop using your extender.

This device complies with PART 15 of the FCC rules and with RSS-210 of Industry

Canada.

This device has been designed to operate with an antenna having a maximum gain of [0] dB. Antenna having a higher gain is strictly prohibited per regualtions of Industry Canada. The required antenna impedance is [50] ohms.

To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for succesful communication.

Operation

is subject to the following two conditions: (1) this device may not

cause

harmful interference, and (2) this device must accept any interference

rece

ived, including interference that may cause undesired operation.

NOTE: The changes or modifications not expressly approved by the party responsible for compliance could void the userʼs authority to operate the equipment.To comply with the FCC RF exposure compliance requirements, this device and its antenna must not be co-located or operated in conjunction with any other antenna or transmitter.

Page 8

LIMITED WARRANTY

Who is Providing This Warranty?

• Orbyx Electronics, LLC (“Orbyx”), as the distributor of this Nexxtech™ product (your “Product”).

What Does This

Warranty Cover?

• This warranty covers defects in materials or workmanship in your Product under normal use and conditions.

What is the Period of Coverage?

• This warranty covers your Product for 90 days from the original purchase date.

Who Is Covered?

• This warranty covers the original consumer purchase

r. Coverage terminates if you sell or

otherwise transfer your Product.

What

Will We Do To Correct Problems?

• We will repair your Product or replace your Product with a new or reconditioned equivalent product, at our option.

How Do

You Get Service?

• Call Orbyx TOLL FREE at 1-866-363-3059 for instructions for obtaining warranty service from Orbyx

’s authorized service providers.

• Or, return your Product directly to the retail store from which you purchased the Product.

• When you obtain service for your Product, you must provide a purchase receipt (or other proof of the original purchase date) and a description of the defect(s).

What Does This

Warranty Not Cover?

• This warranty DOES NOT COVER:

• damage due to misuse, abuse, alteration, unauthorized repai

r, or accident (such as improper

electrical current);

• damage due to “acts of God” (such as lightning) or other contingencies beyond our control;

• cosmetic damage;

• externally generated static, signal reception or antenna problems not caused by your Product; or batteries.

• This warranty also DOES NOT COVER, and in no case will we be liable fo

r, any incidental damages (such as transportation costs to and from an authorized service provide

r, or loss of time) or consequential damages (such as costs of repairing or replacing other property which is damaged, including tapes, discs, speakers not included with your Product or other accessories, or external electrical systems) resulting from the use of your Product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

• Defacing the serial number, or using your Product for commercial or institutional purposes, voids this

ORBYX ELECTRONICS WARRANTY

ORBYX

Electronics warrants that this product will be free

from

defects in materials and workmanship for a period of

nety (90) days from the date of purchase. Within this

period,

simply take the product and your proof of purchase

any ORBYX Electronics store or dealer and the product

will

be repaired without charge for parts and labour. ORBYX

Electronics

reserves the right to charge for transportation.

Any

product which has been subject to misuse or accidental

damage is excluded from this warrant

This

warranty is only applicable to a product purchased

through

ORBYX Electronics' company owned stores and

dealers

and to a product that is presented for repair in a

country

where ORBYX Electronics offers the product for

sale.

While this warranty does not confer any legal rights

other

than those set out above, you may have additional

statutory

rights which will vary under the laws of the various

countries,

states, province and other governmental entities in which ORBYX Electronics operates. This warranty is subject

to all statutory rights you may have in the country of

purchase.

LIMITED WARRANTY

Limited Warranty/Garantie Limitée

U.S.A & Canada

Distributed exclusively in the U.S. by Orbyx Electronics, LLC 501 South Cheryl Lane, Walnut, CA 91789

Imported in Canada for/Importé au Canada pour Orbyx Electronics, Concord, Canada, L4K 4M3

Manufactured in China

For product support please contact www.orbyxelectronics.com or 1-866-363-3059

Are There Other Warranties?

• There are no express warranties other than those expressed herein. Neither the sales personnel nor any other person is authorized to make any other warranties or to extend the duration of any warranties.

• ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED

WARRANTY OF MERCHANTABILITY (AN

UNWRITTEN

WARRANTY THAT A PRODUCT IS

T FOR ORDINARY USE), ARE LIMITED TO 90 DAYS. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

How Does State Law Apply?

• This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.