NEXTECH TE315M User Manual
OPERATION MANUAL
PROLOGUE
CAUTION : Any changes or modifications in construction
of this device which is not expressly approved by the
party Responsible for compliance could void the user’s
authority to operate the equipment.
NOTE : This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. The limits are
designed to provide reasonable protection against
harmful interference when the equipment is operated in
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction
manual, may cause harmful interference to radio area is
likely to cause harmful interference in which case the
user will be required to correct the interference at his
own expense.
OPERATION GUIDE
2
TABLE of CONTENTS
SAFETY
UNPACKING
I. GENERAL INFORMATION
1. GENERAL FEATURES…………….………………….………I-2
2. SPECIFICATIONS…………………………….………………I-3
3. PARTS DESCRIPTION ….…….…………………………….I-4
II. TPMS DIAGNOSIS
1. CONNECTION METHOD……………………..…………..…II-2
2. VEHICLE AND SYSTEM SELECTION………………………..II-3
3. DIAGNOSTIC TROUBLE CODES…………………….………II-5
4. CURRENT DATA…………………………………...…..….….II-7
5. WARNING STATE…………………………………..…..…….II-11
6. ACTUATION TEST………………………………….…..…....II-15
7. ECU INFORMATION……………………………………..…...II-18
8. SPECIFIC DATA WRITING…………………………..…..…..II-20
9. DUAL DISPLAY………………………………………..…..….II-25
III. TPMS EXCITOR
1. CONNECTION METHOD……………………..………….…III-2
2. VEHICLE AND SYSTEM SELECTION…………..…………..III-3
IV. SYSTEM SETUP
1. CONNECTION METHOD……………………….……….….IV-2
2. SYSTEM CONFIGURATION…….………..……..…….…...IV-3
3. DATA SETUP…………………….……………….………….IV-5
4. KEY PAD TEST………………………..………………..…...IV-7
5. CONTRAST ADJUST SCREEN..………………………….…IV-8
V. SCREEN CAPTURE VIEW
1. OPERATION FLOW………………………………….………..V-2
2. MODE APPLICATION………………………….…….….….…V-3
3. HOW TO USE THE SCREEN CAPTURE……………..….…..V-5
4. HOW TO USE THE DOWNLOAD FOR PC……………….…V-6
PROLOGUE
OPERATION GUIDE
3
PROLOGUE
SAFETY
Safety Precautions
This equipment described in this manual is intended for use only
by qualified personnel. Safe and effective use of this equipment is
dependent upon the operator following normally accepted safety
practices and procedures in conjunction with the special
requirements detailed in this manual. Specific warning and cautionary
statements will be found, where applicable, throughout this manual.
Where necessary, the WARNING statements and ICON will be
described in this guide.
WARNING identifies conditions or actions which may damage
TPMS EXCIER or the vehicle.
IMPORTANT WARNING MESSAGES FOR SAFETY ARE
AS FOLLOWS:
DO NOT DROP TPMS EXCITER MAIN BODY. AND
TPMS EXCITER MUST ALWAYS BE COVERED BY THE
SHROUD
DO NOT PLACE TPMS EXCITER UPON DISTRIBUTOR
OF VEHICLE.
STRONG ELECTRO-MAGNETIC INTERFERENCE CAN
DAMAGE TPMS EXCITER.
A STRONG SURGE OR ELECTRONIC SHOCK IN THE
POWER SUPPLY LINE CAN DAMAGE TPMS EXCITER
POWER SUPPLY. DO NOT USE TPMS EXCITER UNDER
THESE HARSH ENVIRONMENT.
OPERATION GUIDE
4
UNPACKING
The TPMS EXCITER kit comprises the following
standard along with the option kit where ordered.
The kit contents should be checked upon receipt and
damage or shortages reported to the supplier
immediately.
PROLOGUE
[ Figure 0.1 : TPMS EXCITER KIT ]
OPERATION GUIDE
5
1. STANDARD KIT
PART NO. PART NAME
1 09900-33000 TPMS EXCITER MAIN BODY
2 09900-33030 DLC CABLE 16
3 09900-33080 CARRYING CASE
4 09900-33040 USB CABLE
5 09900-33060 OPERATION MANUAL
6 09900-33010 RUBBER SHROUD
7 09900-33070 S/W DOWNLOAD CD
8 09900-33050 AD/DC ADAPTOR
9 09900-33020 RECHAGERABLE BATTERY
PROLOGUE
OPERATION GUIDE
6
ICON
OPERATION LEVEL ICON
: LEVEL 1 OPERATION(INIT LEVEL)
: LEVEL 1 OPERATION(MENU LEVEL)
: LEVEL 1 OPERATION(MODE LEVEL)
MESSAGE RELATED ICON
: PROCESS / RESULT MESSAGE
: ERROR MESSAGE
: WARNING MESSAGE
APPLICATION HELP ICON
: SCREEN EXPLANATION
: OPERATION GUIDE
: HELP / TIPS
: NOTE
PROLOGUE
OPERATION GUIDE
7
I. GENERAL INFORMATION
1. GENERAL FEATURES…………………….…………….I-2
2. SPECIFICATION……………..……………..…………..1-3
3. PARTS DESCRIPTION…………………….……………I-4
GENERAL INFORMATION
1. General Features
TPMS EXCITER offers the following functionality:
On board diagnostic communication
Special vehicle test emulation
TMPS EXCITER feature include:
Diagnostic TPMS communication with HYUNDAI
vehicle
Diagnostic TPMS communication with KIA vehicles
High resolution LCD display
Soft touch key
Shock protecting rubber shroud
PC communication facility
PC software download with USB
OPERATION GUIDE
I-2
GENERAL INFORMATION
2. SPECIFICATION
CASING Dark gray color
High strength ABS material
LCD SPEC. 320 by 240 resolution
LED Backlight type
Standard character output :40 columns 12
Lines
KEYPAD Power ON /OFF Key, Soft Function 6
Keys, Arrow 4 Keys, Fixed Functional 4
Keys
NUBER 0~9 KEY(10), Enter,ESC,YES/NO
Key.
Type : Soft Touch Keypad
MEMORY
CAPACITY
OPERATION
VOLTAGE
OPERATING
TEMPERATURE
DLC COMMUNICATION LINE
DIMENSION Width : 125mm
BATTERY SMART LI-ION BATTERY, 7 HOUR LIFE
FREQUENCY 125KHZ, 315MHZ(AM/FM)
POWER
CONSUMPTION
Internal Memory :
16 Mbytes Built-in memory
7 – 36 VDC INPUT
0°C -50°C
TPMS K-Line
CAN
SAE-J1850
Length : 223mm
Depth : 68/43mm (neck part)
3.6 Watts
OPERATION GUIDE
I-3
GENERAL INFORMATION
3. TPMS EXCITER Parts Description
(1) TPMS EXCITER MAIN BODY
(Part No: 09900-33000)
The TPMS EXCITER main body is illustrated in figure I.1.
[Figure I.1: TPMS EXCITER MAIN BODY]
OPERATION GUIDE
I-4
GENERAL INFORMATION
(2) DLC CABLE 16
(Part no: 09900-33030)
The cable is illustrated in figure I.2 and is used to connect
the main body to the diagnosis terminal of vehicles with 16
pin connector vehicles.
[Figure I.2: DLC CABLE 16]
OPERATION GUIDE
I-5
GENERAL INFORMATION
(3) CARRYING CASE
(Part no: 09900-33080)
The carrying case illustrated in figure I.3 provides for easy
transportation of TPMS EXCITER and protection for the
unit when not in use.
[Figure I.3: CARRYING CASE]
OPERATION GUIDE
I-6
GENERAL INFORMATION
(4) USB CABLE
(Part no: 09900-33040)
The cable is illustrated in figure 1.4 and interfaces between
the TPMS EXCITER main body and PC when S/W download.
[Figure I.4: USB CABLE]
OPERATION GUIDE
I-7
(5) OPERATION MANUAL
(Part no: 09900-33060)
The guide, illustrated in figure 1.6 provides TPMS EXCITER
user Instruction.
[Figure I.5: OPERATION MANUAL]
GENERAL INFORMATION
OPERATION GUIDE
I-8
(6) RUBBER SHROUD
GENERAL INFORMATION
(Part no: 09900-33010)
The rubber shroud is used to protect the main body
from damage when in use.
[Figure I.6: RUBBER SHROUD]
OPERATION GUIDE
I-9
GENERAL INFORMATION
(7) S/W DOWNLOAD CD
(Part no: 09900-33070)
The S/W DOWNLOAD CD is used to install the S/W
DOWNLOAD program.
[ Figure I.7 : S/W DOWNLOAD CD]
OPERATION GUIDE
I-10
GENERAL INFORMATION
(8) AC/DC ADAPTOR(12V 3A)
(Part no : 09900-33050)
The AC/DC ADAPTOR provides power to the TPMS EXCITER
when updating the software with the S/W DOWNLOAD
ADAPTOR.
[ Figure I.8 : AC/DC ADAPTOR]
OPERATION GUIDE
I-11
II. TPMS DIAGNOSIS
1.CONNECTION METHOD………………………..……………II-2
2.VEHICLE AND SYSTEM SELECTION…………..…………...II-3
3.DIAGNOSTIC TROUBLE CODES…………………..….……II-5
4.CURRENT DATA………………………….………….……….II-7
5.WARNING STATE………..………………..………………….II-11
6.ACTUATION TEST…………………………………………....II-15
7.ECU INFORMATION………………………..………………...II-18
8.SPECIFIC DATA WRITING……………….…………………..II-20
9.DUAL DISPLAY…………..……………………..……………..II-25
1. CONNECTION METHOD
For vehicles with DLC 16 pin Data Link Connector, power
is supplied from the DLC terminal through the DLC
CABLE without the need for an additional power supply.
For these vehicles connection of the DLC CABLE 16 to
the TPMS EXCITER and the vehicle data link terminals is
all that is required.
Once the power supply has been connected, the DLC
CABLE 16 should be connected to TPMS EXCITER data
link terminal and the DLC CABLE ADAPTER connected to
the vehicle data link terminal and the DLC CABLE 16.
TPMS DIAGNOSIS
OPERATION GUIDE
II-2
TPMS DIAGNOSIS
2. VEHICLES AND SYSTEM SELECTION
2-1. OPERATION FLOW
INITIAL MENU
TPMS DIAGNOSIS
HYUNDAI/KIA VEHICLE DIAGNOSIS
[FLOW II.1: VEHICLE AND SYSTEM SELECTION SUB-MENU IN/OUT]
OPERATION GUIDE
II-3
Loading...