Nextech QC8100 User Manual

Item

Relevant Parameter

Video format

AVI

Video coding

M-JPEG

video resolution

1280X720P 1920X1080P

Video frame rate

30 fps

Player software

general video player soft ware

Picture format

JPG

Image proportion

16:9

Support system

Windows me/2000/xp/2003/vista;Mac os;Linux;

Battery capacity

200mAh

Working time

About 100 minutes

Charging voltage

DC-5V

interface type

Mini 8Pin USB

Storage support

TF card

battery type

High capacity polymer lithium electricity

Miniature DV Camera

Product features

·FULL HD1080P

·Compact design, portable handheld device

·Under low illumination, HD video recording can be performed

·Video reso luti on:1280X720P

·Video resolution:1920X10 80P

·Image resolution:12M( 4032X30 24)

·Motion detecting video:720P and 1080P

·USB 2.0 interface

·Suppor t up to 32 GB Micro SD Card

·Support TV OUT TV monitor video connection

·Built-in lithium battery making recording up to 100 minu tes

Operati on Inst ruction
Charging:

Please charge the device before using as it has a built-in rechargeable lithium
battery. It can be charged by the following ways:

1) Connect computer to charge via a USB cable.

2) Can be charged via a USB 5V adapter or a power bank even while recording.

3) Red light flashes when bein g char ged. Solid red l ight means chargi ng fi nished .
(Please charge 30 minutes more when red light turns solid to ensure the battery is
100% full)
Note: 1: when the batter y is insu fficient, or T recorded in the card is full, DV red

and blue light will flash for 5 seconds then go into protec tion mode
(saving the f ile and automa ticall y shut down ) recor ding fi le has been
saved, at this time, please charge the unit in time.

2: When turned on without a card installed, red and blue lights flash for 5

seconds before shutting down au tomatical ly.

3: No ope ration for 1 m inute a fter turn ed on, t he devic e wi ll shu t dow n

automatically.

One cabl e with thre e functions:

USB with TV cable 1: Can connect to a computer for charging and data

720p video recording without flashing:

Hold down t he ON/OFF button for 1 seco nd to turn on the device. The blue light is
solid on and this indicates the status is in 720p recording mode.

Record 720p video

After turning on into 720p record mode, press ON/OFF button, recording begins
with the blue light being off; Press power b utton again, recording stops a nd the
blue light is back on indicating the status being back to standby for 720p recording.

1080p video recording without flashing :

In 720p recoding mode, press Mode button once, then both red and blue lights are
solid on, indicating that it is in 1080p recording mode. Then press the ON/OFF
button once again, the red light will flash 3 times with the blue one s taying solid
light and then both red and blue lights go off. This indicates that 1080p video
recording begins. Press power button again, recording stops and both red and
blue light are back on indicating the status being back to standby for 1080p
recording.

Note: All the above recording will be stored to a series of 5 -minute video files and
do loop recording.

Image Capture Mode:

After just turning on, press twice Mode button to enter into capture mode with only
red light being solid on. Each press to the ON/OFF button will trigger one photo­taking with the red light flashing once simultaneously. An image will be stored
automatically.

Infrared lamp on and off:

On: b oot up to any standby mode, hold down the ON/OFF butt on for 2 seconds
with the red ligh t flash twice, infrared night vision lamp is on and can record in
night vision mode now.
Off: in any standby mode, hold down the ON/OFF button for 2 seconds with the red
light flash three times, infrared night vision lamp is off.

Motion detecting mode(720P-1080P)
720p motion detecting: in blue light stan dby m ode, hold down mode key for 3

seconds, red light flashes three times then goes o ff. Thi s means motion detecting
video mode is enabled. When motion being detected, both red an d blue l ights
flashing means 720p motion recording.
1080p motion detecting: in the red and blue lights standby mode, hold down the
mode button for 3 seconds, red light fla shes t hree times then goes off. This means
motion detecting video mode is enabled. When motion being detected, red and
blue lights flashing means 108p motion recording.

Note: All the above recording will be stored to a series of 5-minute video files and
do loop recording. (Pressing on any button will cancel the motion detection
recording)

Filling record:

With a TF card installed, connecting to an external USB 5V pow er supply will
make the device directly begin 720p video recor ding, until TF card is full or power
supply is cut off or any manual operation interrupts.

TV OUT mode:

Connect to a TV via the USB TV cabl e, the device can be op erated to take photos
and videos, motion detection record as the above described.

Reset:

Use a pin to pres s the but ton insi de the R eset port to reset the dev ice.

Power off:

In any s tandby (video, pictures, motion detecting) mode, hold dow n ON/OFF
button for 6 seconds or so to shut down the device. Or in an y stan dby mo de, the
device will automatically shut down in a minute if there is no operation.

Edit time watermark on rec ording:

The device will automatically c reate a T XT fil e in the TF root direc tory. Con nect to
a computer via a USB cable, on a removable disk to open the TIMEREST.txt fil e,
which is editable for p referr ed tim e format and with or without time waterma rk on
the recording. Refer to the following forma t:
1: 2015060 8192526 Y (time watermark display)
2: 2015060 8192526 N (no time watermark display)

Notice:

a. Please ensure a T-flash (Micro SD) card is insta lled , othe rwise , the

device can’t work normally.

b. To get correct and clear pictures or stable recording, pleas e use the

product in sufficient lighting conditions and keep the camera a
distance of more than 50cm from objects.

Connect to computer:

The device can be connected directly to the computer, used as a USB disk.

Reminder:

a. After the machine to connect the computer, if the computer can't identify, or still
did not pop up in 30 seconds removable disk logo, please reset to plug again.
b. Suggest using the T card reader directly read the video files to play, and play
directly by USB connection in the video file, in this video recorder built-in memo ry
maybe because the data volume is too big, transport couldn't keep up with, to play
not smooth.

Relevant Parameter

Operating Manual QC8100

transmission between the computer and the device.
2: Can plug into TV OUT to display on a monitor.
3: Can connect DV 5V charger while recording.

Note: After each use of the battery recharging, it takes about 2-3 hours or so to
completely filled with filling, each full red an d blue light s all 30 minutes again , as
far as possible after the battery full use.
Because of this product is a real HD high DV, product consumption current is

bigger than general please, use zinc alloy shell material, and when using the
product may have some hot state belongs to the normal phenomenon, don't have
to worry about bad products appear, is a long time after aging test to ensu re t hat
product quality problems before shipment.

Matters Nee ding Atte ntio n:

Use occasi ons: please strictly abide by the relevant national laws and the product
may not be used for any illegal purpose, otherwise the consequence is proud.
Working temperature: please use und er natural t emperature, do not work i n the
human body can not adapt to the temperature

Working humidity: please use under suitable for human living environment
humidity, please do not put product in damp working environment, the product
does not have waterproof function, please keep this product pour water or
exposed to rain water
Shooting illumination: please have adequate light source under the environment of

use, do not use such as super light source, camera directly into the sun to avoid
optical device is damaged.
Cleaning: do not use in excessive dust d ensity envi ronment, in order to avoid the
lens and other components from dust, impact camera effect
Waste treatment: please pay attention to environmental protection, do not throw
this product. Forbid throwing this product in the fire, so as to avoid explosion.

Distributed by:
TechBrands by Electus Distribution Pty. Ltd.
320 Victoria Rd, Rydalmere NSW 2116 Australia
Ph: 1300 738 555 Int’l : [phone] Fax: [phone]
www.techbrands.com
Made in China