NextBase TV700F ATV, TV700F User Manual

1. Shift the switch on the left side of sample to ATV mode;

2.Connect the ATV antenna to sample and power on;

3.Press the menu key on the remote control, goto "MAIN MENU" ;

4. Select "color" to change the TV system to " PAL NTSC(SECAM)"
according to signal style;

5.Go back to "AUTO SCAN", press "enter" to scan;

TV700F ATV scan function illustration

DongGuan Simon Technology Co.,Ltd.

MENU
key

PDF Creator - PDF4Free v2.0 http://www.pdf4free.com

6.Enter into scanning, screen shows "SCANNING";

7. After receiving the signal, it will show channal number after "CHANNEL FOUND";

Remark: 1. Samples scan the signal instep-further way, and the step is 50KHz;

2.Samples's scan frequency range: from 40.5MHz to 870.5MHz.

Prepared By:JianQuan Liang. Approved By:JuHua Wu

PDF Creator - PDF4Free v2.0 http://www.pdf4free.com