Next base SEG BOX-C QUICK Reference GUIDE

Seg Box-C manual

A0 2009.09.25

Seg Box-C

Exclusively for Click&Go Series DVD players

Series Compatible

Thank you for purchasing this Seg Box-C. Please read the information below
carefully before operating and keep it for future reference.

Package contents:

Seg Box - C

Parts introduction:

1

2

3

Notes:

This device is designed for receiving ISDB-T TV channels. Make sure the TV system matches with the country's
TV system.

4

5
6
7
8
9
10

Antenna

1. Antenna Connector

2. iX Plug

3. DC Out Plug

4. LED indicator

5. Menu Button

6. Ch+ (Channel Up)

7. Ch- (Channel Down)

8. Enter

9. Power On/Off

10. DC In Jack

Connecting the Seg Box:

1. Connect Seg Box to Click series DVD players

Connect the Seg box directly to the Click DVD player or monitor when it is used inside car.

Connect the AC-DC adapter of Click DVD player to both DC In Jack of Seg Box and AC power outlet in case
adapter is used in supplying power to DVD player.

2. Turn on the DVD player and switch the player to AV In mode.

3. Switch the Seg Box to On and the LED indicator will light.

4. The Seg Box will scan automatically when using for the first time, all the channels found will be saved automa­ tically. If there is no channel found, the prompt message “NO SIGNAL” will appear. Any time when CH+ and
CH- are pressed simultaneously, the device will scan automatically.

5. Menu Button

3 items in the Menu: Tamanho de tela, EPG and Legenda. You can operate them by using the buttons CH+ ,CH­ and ENTER.

Tamanho de tela--- 2 display modes: Normal and Tela cheia
EPG--- Electronic Program Guide, use this item to check and select the program.
Legenda--- Used for desligada and ligada selection.

168 X 98 mm

Baobao