Please read this manual carefully before operation and keep it for future reference. It will be useful
should you encounter any operational problem.
WARNING:
CAUTION:
LCD:
WEEE:
Do not expose this product to rain, moisture or water under any circumstances,
doing so may result in the risk of electric shock or fire.
To reduce the risk of electric shock, do not perform servicing other than that
contained in the instruction manual, unless you are qualified to do so.
Have the unit serviced by a qualified service technician if;
The unit has been exposed to rain or water.
The unit does not seem to operate normally.
The unit exhibits a marked change in performance.
A Liquid Crystal Display (LCD) screen is a multilayer complex component, containing
691,200 pixels.
Pixels can however fail during normal product life. 1 pixel = 0.00014% failure rate,
and one pixel failure per year of operation is considered normal and not a cause
for concern.
Disposal of Waste Electrical and Electronic Equipment and/or Battery by users
in private households in the European Union.
This symbol on the product or on the packaging indicates that this product can not be
disposed of as household waste. You must dispose of your waste equipment and/or
battery by handing it over to the applicable take-back scheme for the recycling of
electronic equipment and/or battery. For more information please contact your local
household waste disposal office.
DO NOT ATTEMPT TO SERVICE THE UNIT BY YOURSELF!
04
PRODUCT SPECIFICATION
Model Number / Name
Power Requirements
Power Supply
Sensor Resolution
Lens Type / Angle / Aperature
Recording Resolution (Default)
Recording Format
Screen Size / Ratio
Screen Resolution
Card Reader
SD Card (Recommended Type)
SD Card Recorded File Capacity
(based on default settings)
Recommended computer
playback software
Video Out
Internal Battery
Unit Dimensions / Weight
NBDVR101 / NEXTBASE iN-CAR CAM 101 Go
5V / 150mA
12-24Vdc Car Power Cable (supplied)
Fuse Type: 20mm Glass Fast Blow 2A
Output: 5Vdc
1M Pixel (1,000,000 Pixel)
4G / 120° / F2.0
1280 x 720 @ 30fps
AVI
2.0" / 4:3
960 (W) X 240 (H) pixels x RGB
MicroSD SDHC, Class 6-10, <=32GB
8-32GB Class 10 (30mb/s) branded (not supplied)
8GB = 60mins of recording
16GB = 120mins of recording
32GB = 240mins of recording
VLC Media Player (free download from www.videolan.org/vlc)
2.5mm Jack (Video / Audio), cable NOT supplied.
Lithium-ion 3.7V / 140mAh
The battery is designed to allow the iN-CAR CAM to function
for approx. 15mins (recording time) in the event of power loss
within the vehicle.
It is not intended as an alternative power source to replace
the supplied car adaptor.
68.1 x 57.7 x 37.4mm / 56g
05
PACKAGE CONTENTS
After unpacking please check the contents of your iN-CAR CAM product package, as listed below.
iN-CAR CAM
Car Power Cable
Quick Start Guide
Product appearance may differ slightly to that shown above.
Instruction Manual
Mount
USB Cable
Instruction Manual
06
PRODUCT FEATURES
Thank you for purchasing this NEXTBASE iN-CAR CAM product, in this section we will outline some
of the features available with this device.
2" 4:3 LCD Colour Screen
Large screen for ease of use and viewing the playback of both recorded videos and photos.
1.0M PIXEL CMOS Sensor
Provides high quality recording up to 1280 x 720 HD.
120° Wide Angle Lens
Wide angle lens to allow best possible recording of the vista ahead.
G Sensor / File Protection
In the event of an impact the device will automatically 'protect' the recording, stopping the file from
being over-written.
Video files can also be 'protected' when viewed within playback mode.
‘One-Touch’ File Protection
A dedicated button which can be pressed in event of an emergency situation to protect the current
recording.
Automatic Start / Stop Technology
The iN-CAR CAM senses power supplied to the cigarette power socket as soon as the vehicle‘s
ignition is turned on and will start to record automatically.
When the ignition is turned off, the iN-CAR CAM will perform an automatic shutdown process.
Still Camera
Take still images to keep a photographic record of an incident.
Built-in Microphone & Speaker
Record sounds along with the video, which may then be of use should an incident occur.
Card Reader Function
Device can be used as Card Reader once connected to a computer, using the supplied USB cable.
Internal Battery
The Lithium Polymer battery allows the iN-CAR CAM to be used in event of the vehicle losing power.
07
PARTS AND CONTROLS
3
2
MODE
1
1411
13
6
4
AV-OUT
5
10 9 8 7
12
RESET
MIC
1. POWER / MODE
Power:
Press and hold for 2 seconds to turn
On / Off the iN-CAR CAM.
Mode:
Press to select Video, Photo or Playback
mode.
2. MINI USB SOCKET
Connect the supplied car power cable here.
Also used for connection to a computer using
the supplied Mini-USB cable.
3. MOUNTING POINT
Attached supplied mount here.
4. AV OUT SOCKET
For use with AV Cable (sold separately).
5. MEMORY CARD SLOT
Insert MicroSD card here.
Compatible with SDHC <=32GB, Class 6-10.
6. DUAL COLOUR LED INDICATOR
RED = Power On
RED Flashing = Recording
BLUE = Battery Charging
7. RECORD / OK
Record:
Press to start / stop a recording when in
Video Mode, or take a photo when in
Photo Mode.
OK:
Press to confirm selection when in menus.
08
PARTS AND CONTROLS (CONTD.)
3
2
MODE
1
1411
12
RESET
13
MIC
6
4
AV-OUT
5
10 9 8 7
8. MICROPHONE / DOWN
Microphone:
Press whilst recording to turn off audio
recording, press again to turn back on.
Down:
Press to navigate down within menus.
9. FILE PROTECT (SOS) / UP
File Protect (SOS):
Press whilst recording to protect the current
file in event of an emergency situation.
Up:
Press to navigate up within menus.
10. MENU / SCREEN SAVER
Menu:
Press to open the Menu within current mode,
press twice to open the Setup menu.
Note: Menus are not available whilst recording.
10. MENU / SCREEN SAVER (contd.)
Screen Saver:
Press and hold for 2 seconds whilst recording
to turn on the screen saver function.
Press any button to re-activate screen.
11. LENS
12. MICROPHONE
Turn on / off the microphone within Setup
menu to enable / disable audio recording.
13. RESET
Press to reset the iN-CAR CAM.
14. SPEAKER
09
IN VEHICLE INSTALLATION
Diagram is for illustration purposes only.
1. Insert a suitable MicroSD card (Class 6 or higher), taking care that the gold contacts are facing the
screen. Push the memory card until it clicks into place. Do not remove or insert the memory card
when the iN-CAR CAM is powered on, this may damage the memory card.
Note:
- Use the edge of a small coin (or similar object) to push the memory card in place if required,
a second push inwards will release the memory card.
2. Attach the device to the supplied mount, taking care the locking tab has ‘clicked’ firmly into place.
3. Remove the protective plastic film from the suction pad. Select a suitable position for the mount
and clean windscreen with a dry / clean cloth to achieve good contact between the glass and
mount, whilst pushing the suction cup onto the glass turn the locking wheel clockwise to secure
the mount to the windscreen.
Please ensure that once mounted the iN-CAR CAM is located within the area of the vehicles
windscreen wipers to maintain a clear view during rainfall.
10
IN VEHICLE INSTALLATION (CONTD.)
Diagram is for illustration purposes only.
4. Connect the supplied car adaptor to the iN-CAR CAM and then connect to the 12-24Vdc outlet of
your vehicle. The device will automatically power on and start recording once power is available.
In some vehicle’s this will as soon as the car adaptor is plugged in, for others the iN-CAR CAM will
power on once the ignition has been turned on.
Note:
- Do NOT wire the iN-CAR CAM directly to a 12V supply or damage will result.
- Always use the supplied car adaptor cable to supply 5Vdc to the iN-CAR CAM.
11
INSTALLATION NOTES
Please read and follow the notes below for safe operation of your iN-CAR CAM within your vehicle.
As per the supplied installation instructions, it is advised to install the iN-CAR CAM so it does NOT
obstruct the drivers view of the road, preferably on the passenger side of the vehicle and behind the
rear view mirror. Whilst the iN-CAR CAM clearly needs to view through the windscreen in an area
swept by the windscreen wipers, the iN-CAR CAM should be installed so as not to intrude significantly
within the wiped area. A 40mm intrusion into the wiped area is the maximum recommended.
Do NOT mount the iN-CAR CAM in front of the driver, as depicted by the red area in the above
illustration.
When installing the iN-CAR CAM in a vehicle, always place the device securely against the windscreen
and where possible conceal the power cable under trim. Make sure that the iN-CAR CAM power cable
does not interfere with the drivers operating controls, such as the steering wheel, pedals or gear levers.
Do NOT mount the iN-CAR CAM in front of an airbag field of deployment or in a position to obscure any
mirrors.
Clean the windscreen at the point of location, prior to fitting the iN-CAR CAM, also, applying some
moisture to the suction cup may be beneficial, to ensure absolute adhesion.
Do NOT to operate the iN-CAR CAM whilst driving. The automatic Start-Stop technology incorporated
within the device negates any need to operate the controls whilst driving.
Adjust any settings or review recordings whilst stationery, not whilst driving.
After the preliminary SETUP has been carried out upon the iN-CAR CAM, adjust the Screen Saver
setting to 10 Seconds, this will blank the screen automatically shortly after starting the vehicle and the
screen will NOT be a distraction in any way to the driver.
12
VIDEO MODE
The key below explains the various information displayed on the screen when your iN-CAR CAM is in
Video mode, some icons will only be displayed once the relevant function has been selected within
the Video menu, as described further down this page.
4
321
10
REC
HD
00:02:51
SD
9
8
75
1. Video Mode Icon: Indicates the iN-CAR CAM is in Video mode.
2. Recording Indicator: Shown on screen when a recording is in progress.
3. Recording Time: Displays the length of current recording.
4. Memory Card Icon: Shown on screen when a memory card is present.
5. Power Source Indicator: Displays whether the iN-CAR CAM is powered via the car adaptor (as
illustrated above) or the internal battery.
6. Protected File Icon: Displayed when a video file has been protected by activation of the internal
G Sensor or the SOS button on the iN-CAR CAM.
7. Time: Displays the current time.
8. Date: Displays the current date.
9. Audio Recording Icon: Shown on screen when Audio Recording is on, when off the icon will
remain on screen but be marked red.
10. Resolution: Displays the current video recording resolution.
6
13
VIDEO MODE SETTINGS
To access the Video Mode settings, press the MENU (M) button. Use the up and down buttons to
select the required option and press OK to view available settings. The video mode menu is not
available whilst a recording is in progress.
The default settings within the iN-CAR CAM have been set to allow you to use the iN-CAR CAM
without the need to change any of the settings, however it is recommended that you explore these
settings to familiarise yourself with the product and it's capabilities.
To change a setting, select the chosen option using the up and down buttons and press the OK
button to confirm.
1. Resolution
Select the recording resolution, this will increase or decrease the quality and file size of the
recorded video.
Options: or 1280 x 720 640 x 390
Default Setting: 1280 x 720
2. Date & Time Stamp
Turn Off / On the date and time stamp shown on recorded files.
Options: On or Off
Default Setting: On
3. Audio Record
Turn On / Off the iN-CAR CAM microphone.
Options: On or Off
Default Setting: On
14
VIDEO MODE SETTINGS (CONTD.)
4. Loop Recording
This feature enables continuous recording of your whole journey to be made, but the recording is
broken down in to manageable bite sized chunks. In the event of an incident you will always have
the latest video footage, for play back later and in a manageable file size.
When the SD card becomes full of recordings from your journey, the oldest recordings are deleted
automatically, in order to make space for the new recordings (any protected files are however not
deleted).
The key below explains the various information displayed on the screen when your iN-CAR CAM is in
Photo mode, some icons will only be displayed once the relevant function has been selected within
the Photo menu, as described further down this page.
321
01410
7
12M
SD
6
54
1. Photo Mode Icon: Indicates the iN-CAR CAM is in Photo mode.
current resolution setting.
3. Memory Card Icon: Shown on screen when a memory card is present.
4. Power Source Indicator: Displays whether the iN-CAR CAM is powered via the car adaptor (as
Illustrated above) or the internal battery.
5. Time: Displays the current time.
6. Date: Displays the current date.
7. Resolution: Displays the image size.
2. Image Count: Displays number of images that can be stored on the memory card based on
16
PHOTO MODE SETTINGS
To access the Photo Mode settings press the MENU (M) button, use the up and down buttons to
select the required option and press OK to view available settings.
To change a setting, select the chosen option using the up and down buttons and press the OK
button to confirm.
1. Resolution
Select the image resolution, this will increase or decrease the quality and file size of the image.
Options: 4032 x 3024 or 2560 x 1920
Default Setting: 4032 x 3024
2. Date & Time Stamp
Turn On / Off the date and time stamp shown on recorded files.
Options: On or Off
Default Setting: On
17
PLAYBACK MODE - VIDEO FILES
The key below explains the information displayed on the iN-CAR CAM screen, when a video is
viewed within Playback Mode.
00:00:00
00:00:00
00:00:00
00:02:12
8
HD
100-0001
100-0001
100-0001
100-0001
64
1. Video Icon: Indicates the iN-CAR CAM is viewing a video file.
2. Recording Time: Displays the duration of the recorded file.
3. Memory Card Icon: Shown on screen when a memory card is present.
4. Power Source Indicator: Displays whether the iN-CAR CAM is powered via the car adaptor (as
illustrated above) or the internal battery.
5. Protected File Icon: Displayed when a video file has been protected by activation of the internal
G Sensor or the SOS button on the iN-CAR CAM.
6. File Number: Displays the current file number.
7. Control Icon: Press the ‘ ‘ button to play and pause the current file. Use the up and down to
select file.
8. Resolution: Displays the resolution of the current file.
To access the Playback Mode settings press the MENU (M) button, use the up and down buttons to
select the required option and press OK to view available settings.
To change a setting, select the chosen option using the up and down buttons and press the OK
button to confirm.
1. Delete
Delete the current file, also available is the option of deleting all files.
2. Protect File
Used to lock or unlock the current file.
3. Thumbnails
When selected this will display stored files as thumbnails, use the up and down buttons to select
file and press OK to open.
7
18
321
SD
SD
SD
SD
5
PLAYBACK MODE - PHOTO FILES
The key below explains the information displayed on the iN-CAR CAM screen, when a photo is
viewed within Playback Mode.
5
12M
100-0001
4
1. Photo Icon: Indicates the iN-CAR CAM is viewing a photo file.
2. Memory Card Icon: Shown on screen when a memory card is present.
3. Power Source Indicator: Displays whether the iN-CAR CAM is powered via the car adaptor (as
illustrated above) or the internal battery.
4. File Number: Displays the current file number.
5. Resolution: Displays the resolution of the current file.
To access the Playback Mode settings press the MENU (M) button, use the up and down buttons to
select the required option and press OK to view available settings.
To change a setting, select the chosen option using the up and down buttons and press the OK
button to confirm.
1. Delete
Used to delete either the current file, also available is the option of deleting all files.
2. Thumbnails
When selected this will display stored files as thumbnails, use the up and down buttons to select
file and press OK to open.
Note:
- Protect option is only available for video files.
21
SDSDSDSD
3
19
SETUP MENU
There is a Setup menu for the general settings, press the MENU (M) button twice on the rear of the
device to access the menu. The options and settings available are described below.
To change a setting, select the chosen option using the up and down buttons and press the OK
button to confirm.
1. Language
Set the language on the iN-CAR CAM as required.
Options: English, Deutsch, Français, Español, Nederlands, Norsk, Suomi ou Svenska
Default Setting: English
2. Date & Time
Set the date & time on the iN-CAR CAM. Use the up and down buttons to change variable and
press the OK button to save the change and move to the next variable.
Pressing OK finally, will save the date and time settings.
3. Format SD Card
Format the memory card, this will delete all content.
4. Exposure
Adjust the amount of light received by the sensor.
Settings: +3, +2, +1, 0, -1, -2 or -3
Default: 0
5. Screen Saver
Turn on the Screen Saver function, this will cause the screen to turn off after a period of inactivity.
Options: Off, 10 Seconds, 30 Seconds or 2 Minutes
Default Setting: Off
Note:
- After the preliminary SETUP has been carried out upon the iN-CAR CAM, change the Screen Saver
setting to 10 Seconds, this will blank the screen automatically shortly after starting the vehicle and
the screen will NOT be a distraction in any way to the driver.
20
SETUP MENU (CONTD.)
6. G Sensor
Adjust the sensitivity of the G Sensor, it is the G Sensor that detects forces which will
automatically protect the current recording in event of a collision.
Settings: Off, Low, Medium or High
Default: Medium
7. TV Frequency
Set the audio / video frequency output format for your television set.
Settings: 50Hz or 60Hz
Default: 50Hz
8. TV Mode
Set the audio / video output format for your television set.
Settings: PAL or NTSC
Default: PAL
9. Default Settings
Reset the iN-CAR CAM to the default settings.
10. Version
Displays the firmware version of your iN-CAR CAM.
VIEWING RECORDED FILES ON A COMPUTER
The recorded video files are of a standard AVI format. Most computers are capable of playing these
files through a suitable generic Media player, such as VLC Media Player.
Take the video files from the iN-CAR CAM and play them directly on your computer. This can be
performed in two ways.
1. Remove the MicroSD card from the iN-CAR CAM and insert this in your computer's card reader
(adaptor may be required). Copy the files to your computer, or play them directly from the MicroSD
card.
2. Connect the iN-CAR CAM to your computer via the supplied USB cable (see next page). Copy the
video files to your computer BEFORE attempting to play them.
21
COMPUTER CONNECTION
Connecting the iN-CAR CAM to a computer using the supplied USB Cable will power on the
iN-CAR CAM, displaying the two available options:
Mass Storage / Power On
Use the up and down buttons to select the required function and press OK to confirm selection.
Mass Storage
If Mass Storage is selected, the iN-CAR CAM screen will show the words ‘Mass Storage’ and take
the function of a card reader for your computer. Upon your computer an extra drive will appear
(e.g.Drive E: or Volume ‘NO NAME’) and you will be able to navigate through the MicroSD Card
and view / manage the stored files.
This feature is useful if you do not have an SD Card reader built in to your computer.
Power On
If Power On is selected, the internal battery on the iN-CAR CAM will be charge, whilst all functions
remain available. Full charge will take approximately 2 hours.
Note:
The functions described above are compatible with Windows XP, Vista, Windows 7, Windows 8 and
Mac operating systems.
The USB connection protocol is USB 1.0 and is designed for the movement of files from the MicroSD
card to the computer only. It will NOT support the playback of high resolution video files directly from
the card within the camera via USB. Simply drag and drop the video files to your computer before
playback. Alternatively, take the SD card from the iN-CAR CAM and insert directly in to your
computers card reader, if available.
AUDIO / VIDEO OUTPUT
As you connect an AV Cable (sold separately) between the iN-CAR CAM and your television, the
iN-CAR CAM screen will blank, as all output is now visible upon your television. All elements of the
Video, Photo and Playback are available via the AV output so you can monitor your recordings upon
a larger screen instantly (useful for when using your iN-CAR CAM as a rear facing camera while
connected to another device for viewing).
The controls upon the iN-CAR CAM operate normally during AV output.
Please contact your local NEXTBASE dealer for accessory purchases.
22
TROUBLE SHOOTING
PROBLEMSOLUTION
The mount will not stay in
place upon my windscreen.
The iN-CAR CAM will not
power up when the car adaptor
is connected.
Video Image is blurred.
Video recording is jumpy.
Video has no sound.
Photograph is blurred.
Playback of Video can not be
stopped during playback.
I can only record a few
minutes of video on my
memory card.
Make sure the protective plastic film has been removed from
the sucker.
Affix to the glass firmly and then rotate the dial clockwise, until
the latch is felt to engage.
Make sure that the glass is smooth and clean.
Do not stick to glass that has any non-smooth effect or paint
whatsoever.
Check power is available to the car adaptor.
Check that the car adaptor LED indicator is illuminated (red), if
not then inspect the car adaptor fuse.
Replacement 2A 20mm fuses are available from your local
electrical retailer.
Remove the protective lens cover, clean the lens.
Clean the windscreen!
Remove the SD card and reformat to remove non-contiguous
files.
For best recording use a branded class 10 type (30MB/s)
MicroSD card of 8 to 32GB recommended size.
Recommended video playback software is VLC media player,
available from: www.videolan.org/vlc.
Your computer may not be sufficient for the playback task, try
an alternative PC.
Ensure that “Record Audio” setting is turned ON within the
Video Menu.
Take care not to inadvertently turn off the microphone with the
iN-CAR CAM control buttons.
Hold the camera still whilst taking the photo.
This is normal, playback can be paused. Then use the up
and down buttons to select another file.
Change the recording size (Loop recording function) to a
smaller size.
Increase the size of the SD card. Max 32GB.
23
TROUBLE SHOOTING (CONTD)
PROBLEMSOLUTION
The AV Out from my iN-CAR
CAM just buzzes on my TV.
I get the message “SD Card
Error” on screen.
I get the message “Memory
Error” on screen.
My iN-CAR CAM shuts down
by itself after a while.
The SD card in my iN-CAR CAM
can not be read.
The screen blanks after a few
minutes upon my iN-CAR CAM.
I get the message “Cluster
Wrong” on screen.
I cannot insert the MicroSD card.
I cannot release the MicroSD
card.
Unresolved issues.
Ensure that the AV cable is correct. Use a stereo 2.5mm jack
plug where the tip is the video and the ring is the audio signal.
The SD card has become unuseable by the iN-CAR CAM.
Remove useful files using your PC and then perform a
“FORMAT” upon the SD card from within the SETUP menu.
The SD card has become unuseable by the iN-CAR CAM.
Remove useful files using your PC and then perform a
“FORMAT” upon the SD card from within the SETUP menu.
Check the supplied car adaptor is functioning correctly.
If the iN-CAR CAM is being powered from the battery then
connect power source. i.e. the car adaptor or USB cable.
Use a good quality branded SD card between 4GB and 32GB
(suggested) and format the card from with in the SETUP
menu of the iN-CAR CAM.
The screen saver is set to ON. Change settings to OFF if
required.
Default setting is off.
The SD card has been formatted in another device and the
Cluster Size is not compatible. Simply use the MENU, SETUP
option to re-format the SD card from within the iN-CAR CAM.
Align the SD card with the contacts towards the rear screen of
the iN-CAR CAM.
Push the SD card down until it clicks in place.
Use the edge of a small coin if finger pressure is not sufficient.
Push the SD card down until it clicks to release it.
Use the edge of a small coin if finger pressure is not sufficient.
Reset the iN-CAR CAM to the default settings within the Setup
Menu and try again.
Should the problem persist call the helpline (02920) 866429
or email: support@nextbase.co.uk
24
NOTES
25
NOTES
26
www.nextbase.co.uk
NBDVR101-IM-ENG-R03
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.