Nextar N5-101 User Manual

Warning

Please turn off the power when inserting or removing
any memory card or USB device.
Otherwise, it may cause damage to the SD card/USB
and the unit.

Safety precaution

1) Use only the supplied adapter with Input 100-240V,
Output 5V.

2) Turn off power before cleaning. Use only a soft
cloth to clean the unit
Do not use liquid cleaners.

3) Avoid exposing the unit to extreme heat.

4) Do not disassemble the Digital Picture Frame,

otherwise it may result in electric shock and void
your warranty.

1

Content

Warning.............................................................................................1

Safety precaution.............................................................................1

Introduction......................................................................................3

1、Features..............................................................................3

2、Packaging Check List .........................................................4

3、Specifications......................................................................4

Product Diagram..............................................................................5

A. Top View...............................................................................5

B. Front View............................. ...............................................5

C. Rear View ..................................... ... ................................ .... 6

D. Side View . ................................ ... .........................................6

Using Your Digital Picture Frame...................................................7

Viewing Modes........ ................................ .. ...............................7

File Saving................................................................................7

Technical Notes ........................... ... ................................ .. ...............8

Question/Troubleshooting Guide.......................... ..... ... ..... ..... ... ....8

2

Introduction

Your new Digital Picture Frame lets you view digital
pictures from memory cards easily and quickly.
No computer or printer is needed
Includes convenient slide show mode, which starts
automatically when the Frame is turned on.
Supports may popular memory card types.
Easy to take with you to share photos with family and
friends anywhere.
A step beyond the t radi ti onal photo frame. View tens or
even hundreds of digital photos without the need to
pay for printing.

1、Features

5.6 inch TFT LCD
Supports Secure Digital (SD), Multimedia Card (MMC),
Memory Stick (MS) memory card formats
View the pictures from memory cards directly
Resolution: 320X234 pixels
Supports high resolution photos
Automatic start of slide show

3

2、Packaging Check List

Digital Picture Frame
User Manual

Quick Start Guide
Power Adapter

3、Specifications

Panel Size 5.6 inches
Resolution 320X234
Brightness 200cd/m²
Contrast 300
Viewing Angle 65/65/45/65(CR>10, B/L ON)
Response Time 15ms T on
Screen Size Mode 4:3
File Format Type JPEG
Max.Photo Size 10megapixels
Power Requirement 5V DC
Power Consumption <5 W
Operating Temperature -10~70 degrees centigrade
Storage Temperature -20~80 degrees centigrade

4

Product Diagram

A. Top View

1. Button

Pause or resume the playback.

2.  Button

Go to the previous picture.

3.  Button

Go to next picture.

4. Rotate Button

Rotate the current picture.

B. Front View

5. MODE Button

Change the aspect ratio
between Pan Scan, Fill, Original
and Auto Fit.

6. P-SAVE Button

Enter the power save mode.
Then press it again to exit the
power save mode.

1. LCD Screen

5

C. Rear View

D. Side View

1. Bracket

Support the Digital Picture Frame.

1. SD/MS /MMC Card Port

Insert SD/MS/MMC card into this port.

2. USB Port

Connect USB device, such as U disk.

3. DC 5V IN

Connect supplied adapter.

6

Using Your Digital Picture Frame

Install the bracket for tabletop display. Connect the AC adapter.
Insert a memory card in the Digital Picture Frame (with the card’s
electrical contacts to wards the front of the unit .). A slide show will
begin automatically.

To enter the power save, press the P-SAVE button.
Press the

briefly and the slide show will be stopped. The current photo will
remain on the screen until the button is pressed again, at which time
the slide show will resume.

To display the previous or next picture, press the  button.
The Rotate button allows photos to be turned proper viewing. Press

repeatedly to rotate the current picture clockwise:
90°

Viewing Modes

Press the MODE button to select display mode: Pan Scan, Fill,
Original and Auto Fit.

File Saving

Photos must be saved in the JPEG format in order to be viewed on

button, the word Pause will appear on the screen

180° 270°.

7

the Digital Picture Frame. Nearly all digital cameras will save in this
format by default. Photos that have been saved with certain image
editing programs can fail to display properly.

Technical Notes

1. Your Digital Picture Frame is a sophisticat ed elect ronic device.
Do not drop or subject the unit to jarring or strong vibrations.

2. Av oid placing t he Digital Picture Frame in areas of high
humidity or where it might be subjected to splashing.

3. The panel is made of plastic and can be easily damaged. Avoid
sharp objects.

4. Use only a soft dry cloth to clean the screen.

Question/Troubleshooting Guide

This chapter presents some troubleshooting problems you may
encounter while using the device. Even if the following guide fails to
solve your problem, please do not disassemble t he device, but leave
the problems to professional staff.

1.Question: What kind of photos does this device’s supports?

Answer: The Frame will display digital photos that are stored in the

JPEG format which is the standard format for nearly all digital
cameras. Some cameras allow images to be stored as TIFF or with
the Frame.
RAW files as well as JPEG. Only the JPEG format is compatible

8

2.Question: What should I do if the system does not respond
when the power is turned on?

Answer: Please make sure the unit is properly connected to a

power source. Then turn it off, reconnect the power and turn it on
again.

3.Question: Why is the memory card not recognized?

The memory card might be inserted rearwards or is not

Answer:

pushed in far enough. After inserting the memory card in the right
direction. If the card still cannot be read, please turn off the unit and
then power it again.

This device comp lies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:

(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including

interference that may cause undesired operation.

9

Nextar, a trademark of Nextar (Hong Kong) Limited
(Pending)

Nextar may find it necessary to modify, amend or
otherwise change or update this manual.

We may reserve the right to do this at any time, without
any prior notice.

All specifications and features are subject to change
without notice.

www.nextar.com
Or write us at:
Nextar Inc.
1661 Fairplex Dr.
La Verne, CA91750
USA

10