3.5 inch
Digital Photo Frame
US ER ’S M AN UAL
Item : N3-5 02#
Warning
To always guarantee optimal function and performance
of your product, we would ask the following:
Before using the product for the first time, carefully read
the operating instructions and adhere to the safety
precautions!
All activities at and with this product may only be carried
out as described in these operating instructions.
Please be sure to include the operating instructions in
case you pass along this product to someone else.
.
Safety precaution
RISK OF ELECTRIC SHOCK. DO NOT OPEN. TO PREVENT
THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER. REFER SERVICING TO QUALIFIED PERSONNEL.
1
1. Read all safety and operating instructions before
operating this product.
2. Save these instructions for future reference.
3. Adhere to all warnings in this operating manual.
4. This product should be connected to a power supply
only of the type described in the operating
instructions or as marked on the unit.
5. Disconnect the power source plug before cleaning.
6. Dusting the unit with a soft cloth is recommended.
Do not clean the inside of the unit.
7. The power cord should be unplugged from the outlet
when the unit is not in use for a long period of time
or while cleaning.
8. Do not place the unit near a heater.
9. Do not get water or excessive moisture into the unit.
10. Dropping the unit, or dropping objects on the unit,
will result in breaking or scratching the glass LCD.
2
Content
Warning.......................................................................1
Safety precaution.......................................................1
Introduction................................................................4
1、Features..........................................................4
2、Packaging Check List .....................................4
3、Specifications..................................................5
Product Diagram & Function ....................................6
Frame
Screen
Technical Notes........................................................11
Question/Troubleshooting Guide...........................11
3
Introduction
1、Features
● 3.5inch TFT (Digital - 4:3)
● Automatic slide show and operate by user
● Slide Show Intervals preset and allow changing by user
● Supports SD / MS / MMC memory slot
● Supports viewing one selectable photo
● Supports JPEG picture format
● Magnetic changeable Frame ,Unique cradle design and
easy control button
2、Packaging Check List
Digital Picture Frame
User Manual
Quick Start Guide
Stand
AC Adaptor
4
3、Specifications
○ Screen Dimension: 3.5” Screen
○ Resolution: 320 x 240
○ Brightness: 240cd/m
○ Contrast: 100:1
○ Photo File Formats: JPEG
○ Memory Card Formats: SD / MS / MMC Card
○ Voltage: DC 5V/1.0A
○ Current: 1.0A
○ View Angle: Left/Right 45 degrees, Up/Down 30 degrees.
5
Product Diagram
Frame
Magnetic changeable Frames
Screen
6
1. Enter Button
1) Thumbnail file list: To display selected picture
2) Single show mode: Click this button to zoom in
and press it for one second, it will rotate the picture by
90 degrees.
3) Slide show Mode: Click to stop slide show
7
2. Down button
1) Thumbnail file list: Move down to highlight different
pictures
2) Zoom: It will move the picture downwards
3) Single show and slide show mode: Click the button
to return to the Main Menu
3. Up button
1) Thumbnail file list: Move up to highlight different
pictures
2) Zoom: It will move the picture upwards
3) Single show mode: Click the button to enter into
slide show mode and click it again to choose the
intervals.
8
4. Right button
1) Thumbnail file list: Move right to highlight different
pictures
2) Zoom: It will move the picture rightwards
3) Single show mode: Click the button to display the
next picture
5. Left button
1) Thumbnail file list: Move left to highlight different
pictures
2) Zoom: It will move the picture leftwards
3）Single show mode: Click the button to display the
preview picture
9
6. Power Port
Plug in the adaptor and it will turn on automatically
7. SD/MS/MMC Card Slot
Insert your media card and it will enter into the
thumbnail interface
8. Stand
Attach the stand to the back of the frame.
10
Technical Notes
1. Your Digital Photo Frame is a sophisticated
electronic device. Do not drop or subject the unit
to jarring or strong vibrations.
2. Avoid placing the Digital Photo Frame in areas of
high humidity or where it might be subjected to
splashing.
3. The panel is made of plastic and can be easily
damaged. Avoid contact with sharp objects.
4. Use only a soft dry cloth to clean the screen.
Question/Troubleshooting Guide
This chapter presents some troubleshooting problems
you may encounter while using the device. Even if the
following guide fails to solve your problem, please do
not disassemble the device, but leave the problems to
professional staff.
11
1.Question: What kind of photos does this device’s
supports?
Answer: The Frame will display digital photos that are
stored in the JPEG format which is the standard
format for nearly all digital cameras. Some cameras
allow images to be stored as TIFF or with the Frame;
RAW files as well as JPEG. Only the JPEG format is
compatible
2.Question: What should I do if the system does not
respond when the power is turned on?
Answer: Make sure the unit is properly connected to
a power source. Then turn it off, reconnect the power
and turn it on again.
3.Question: Why is the memory card not recognized?
Answer: The memory card might be inserted
rearwards or is not pushed in far enough. After
inserting the memory card in the right direction; if the
card still cannot be read, please turn off the unit and
then power it again.
12
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to
comply with limits for Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio or television reception, which can
be determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment
and the receiver. Connect the equipment into an
outlet on a circuit different from that to which the
receiver is connected.
3. Consult the dealer or an experience radio/TV
technician for help.
13
Nextar™ a trademark of Nextar (Hong Kong) Limited
Nextar may find it necessary to modify, amend or
otherwise change or update this manual.
We may reserve the right to do this at any time,
without any prior notice.
All specifications and features are subject to change
without notice.
www.nextar.com
Or write us at:
Nextar Inc.
1661 Fairplex Dr.
La Verne, CA91750
USA
14
Loading...