Nextar N1-501 User Manual

Portable Keychain Photo Album

N1-501

Instruction Manual

Thank you for purchasing the Nextar N1-101
Portable Keychain Photo Album. Please
read this manual to get the optimum
performance out of this product.

Quickstart Guide

NOTE: YOU MUST INSTALL INCLUDED
SOFTWARE BEFORE ATTACHING YOUR
PHOTO ALBUM TO YOUR PC.

Software Installation:

1. Insert the included CD into your PC’s
CDROM drive

2. Open “My Computer” and find the CD
you just inserted. It will appear similar
to the image below:

3. Double click the CD drive icon to open
the CD. ** NOTE** THE ACTUAL
DRIVE LETTER (D IN THIS CASE)
COULD BE DIFFERENT ON YOUR
PC. LOOK FOR THE DRIVE THAT IS
THE CDROM ON YOUR
PARTICULAR PC

4. Double click the “Digital Photo Frame
Tool folder icon. Inside that folder,
double click the “PhotoViewer vX.XX
Setup (without bios).exe” icon. NOTE:
THE EXACT REVISION NUMBER OF
THE VERSION ON YOUR CD COULD
BE DIFFERENT THAN IN THE
PHOTO BELOW:

5. After double clicking this icon, the
following screen should appear:

6. Follow the on-screen prompts to install
the software. Accept all the “defaults”
that the program suggests (if you are
experienced in installing software you
can customize your install)

You are now ready to charge your Keychain
Photo Album.

1. Using the included cable, plug the cable
into your PC first, and then into your
Mini Photo Album.

NOTE: YOUR PHOTO ALBUM MUST BE
FULLY CHARGED BEFORE USING IT.
THIS CHARGING TIME IS TYPICALLY 2-3
HOURS

2. When the unit if first plugged in to your

3. Once the unit is fully charged, unplug it

4. With the unit off, plug it back into your

PC, the following screen appears:

There will be blinking battery icon in the
lower left hand corner. This icon will
stop flashing once your unit is fully
charged

from your PC and turn it off using the
ON/OFF switch on the side of the unit.

PC (using the same procedure as #1).

5. You will see the following screen:

Using the DOWN navigation button on the
side of the unit, move the cursor down to the
USB Update position:

Then press the MENU (top) button to select
the Update mode. The following screen will
appear:

You are now ready to transfer images to and
from your unit.