Nextar MD1008 User Manual

ITEM# MD1008

8” TFT Color Display

Flip Down Monitor

INSTRUCTION MANUAL

ITEM# MD1008

TABLE OF CONTENTS

Thanks from Nextar

Important Caution
Adjusting Light on LCD

Understanding the LCD
Control LCD
About The Screen of LCD
LCD Protection

Wiring Diagram

Installation

Describing the units buttons

Remote Control

Function Description
Changing the Battery
Caution

Operation Of LCD
Turn On/ O Buttons
Function Setup Buttons
Key Of Reading Light

2

2

3

5

6

7

7

8

9

Specications

10

1

ITEM# MD1008

APPRECIATION

Thank you for purchasing Nextar 4:3 TFT-LCD ceiling monitor. Please read
this Manual thoroughly, and retain this document for future reference.

IMPORTANT CAUTION

1. Please take note and use all caution terms of this manual.

2. Please do not permit anyone to operate this machine before he/she has
reads or knows how the unit operates.

3. Please do not put the LCD in the positions below:
A. Any position blocking the sight of the driver.
B. Any position which may harm the operation or safety system of
the
vehicle, including the air chamber.
C. Any position which may aect the driver to safely operate the
vehicle.

4. To ensure safe driving please keep the volume at a suitable level for
your
vehicle.

5. Same as any other equipment in your car, you must pay complete
attention
to your driving and not your LCD. In the event of your LCD having
trouble
please stop at a safe location to make the necessary adjustments.

6. Do not equip or attempt to repair the LCD yourself. It is very dangerous
for
you to personally repair this unit if you are not familiar with the internal
components.

7. Avoid water or any moisture in order to protect the machine.

2

ITEM# MD1008

UNDERSTANDING THE LCD

Warning

• Please cut off the power right away and go to your local authorized repair
service when water or other objects or liquids enter into the machine. If you
do not cut the power immediately this may lead to electric shock and/or fire.

• Please cut off the power right away and go to your local authorized repair
service if smoke or a peculiar burning smell occurs. Failing to do so will lead
to system errors.

• Please do not remove the back cover of the LCD. If exposed it is important
to know you are at risk of being electrically shocked. Always inquire at your
local authorized repair service to perform any inspection, adjustment, and
repairs.

Adjusting Light on the LCD

Be advised the adjustment for angles and a clear LCD maybe limited by design.
You can adjust for a clearer picture by adjusting the lightness of the screen.
When you first use this machine please adjust the LCD for viewing in the
furthest position.

Control LCD

• The temperature of the LCD may become high if exposed to direct sunlight
for long periods of time, resulting in damages to the unit. Please put the
machine in safe keep while not using.

• LCD should work with in the following temperatures:
Working temperature area from 32 degrees F (0 Celsius) to 140º F (60º Celsius)
If above or below the temperatures listed the LCD may not function properly.

• Do not touch the LCD, as it may become dirty or damaged.

• Please note that putting anything between the LCD and its docking station
will prevent the unit from functioning properly.

3