Nextar MA933ASC-2 User Manual

Page 1
USER MANUAL
MA933ASC
Page 2
Thank you for your purchase. Please read this manual carefully before using your new player.
If the actual operations of your player are not the same as in this manual, visit our website for latest product information. Http://www.nextar.com
1
User Manual 1 Driver Disc 1 USB Cable 1 Necklace stereo earphone 1 AAA battery 1
Accessories:
DIRECT USB2.0 FS PLUG SUPPORTS MP3, WMA 6 MODES OF EQ LED DISPLAY LOW BATTERY CONSUMPTION
Main Features:
Page 3
How to use it
Installation of battery The red LED on the top panel will light after installing the battery for 8 seconds, and the player will be in stop mode.
Power ON / OFF To turn on the player, once the battery is installed, press and hold the Play key for 2 seconds until the LED light comes on, then press the Play button to enter play mode. To turn off the player, press and hold the Play key for 2 seconds. During Play mode, press the Play button to enter Standby mode.
Volume+Volume-
DIGITAL MP3 PLAYER
2
Volume+/Volume- Press or hold the button to turn up or down the volume during a song or recording.
Page 4
3
Last Next
Previous Song/Next Song Press the Last key to select the previous song, press the Next key to select the next song.
NOTICE:
To save energy, the player will turn off automatically in stop status without use after 30 seconds.
EQ Mode Press the EQ key to enter the equalizer mode; 6 EQ modes: Natural, Rock, Pop, Classical, Jazz, DBB.
Fast Reverse / Forward In playing status, by holding the Last key, you can reverse faster; by holding the Next key, you can move forward faster.
Storing music to MP3 player Connect Mp3 Player to PC Take off the cover and connect to PC via USB plug Click "My Computer" to find "Removable Disk" Transfer songs of MP3 or WMA format from your computer to your mp3 player.
Page 5
4
1.Windows 98 / 98SE Installation
a.Insert driver CD disc into your CD ROM to start up:\WINDOWS 98 DRIVER\ Setup.exe b.A menu will automatically pop up c.Select Install / Remove Driver to start installation d.Follow the on-screen instruction to install the driver e.Click "OK" to restart. (Must restart to complete installation), illustration 1 f.After restart, insert SPORT MP3 to the USB port on your computer/laptop. Windows will automatically detect the new hardware. If setup is correctly performed as instructed, you should find two "Removable Disks" shown in "My Computer".
2.Windows ME / Windows XP / Windows 2000 Installation
For these operating systems, NO Driver is required because Windows has a built-in driver that supports your unit. Simply plug your device into the USB port and the operating system will recognize it. Next you will see two "Removable Disks" drives in My Computer.
3. Linux 2.4.0 + / Mac 8.6 + Installation
No Driver is required for these operating systems. Simply plug the device into the USB port and the system will automatically find it.
Driver Installation
Page 6
Specification
MP1, MP2, MP3, WMA, WMV, ASF, WAV
Music format
Working Temperature
-5 - 40
Operating System
Windows98/SE/ME/2000/XP/2003, Mac OS 10, Linux 2.4.2
MP3, WMA, WMV, ASF
Max output of earphone
MP3 bits rate
WMA, WMV, ASF bits rate
Frequency response
SNR
(L) 10mW+ (R) 10mW (32Ohm)
8K bps - 320K bps
5K bps - 384K bps
85dB
20Hz to 20KHz
Weight
25g (Without battery)
LED indication
USB2.0 Full Speed
PC Connection
Flash memory
Flash storage: 32MB - 2GB
Battery
One AAA (No.7) alkaline battery
Max Play Time:10 hours
In stop status LED light, In play status LED flash
5
Loading...